How to Install a Food Truck Hood

Поделиться
HTML-код
  • Опубликовано: 9 янв 2025

Комментарии • 73

  • @joselopezlopez8599
    @joselopezlopez8599 2 года назад +1

    Thanks for the guides someone did the kitchen for my trailer. but he did it in very poor quality, with your videos I have readjusted it. and now i'm happy.

  • @nealmiller4801
    @nealmiller4801 Год назад +1

    Such detail. Really love the videos and the content. Thank you Frank.

    • @fbaltierrez
      @fbaltierrez  Год назад +1

      Appreciate that feedback 👍👍 thank you

  • @TheGoodTeacher1
    @TheGoodTeacher1 2 года назад +1

    Keep these coming

  • @chameapo2220
    @chameapo2220 Год назад

    Thank you!! We are sub and we like yours videos !!

  • @veraoff-roads3487
    @veraoff-roads3487 2 года назад +2

    Frank I really appreciate these videos!
    I was wondering if you had some insight on how to wire the switch inside of an ansul box.
    It is the one the trips and switches the fan on if the system activates. I'd like to do it myself as it's the very last thing I have to do, but I couldn't find anything definitive online.
    Thank you again!

    • @fbaltierrez
      @fbaltierrez  2 года назад +2

      Definitely I would have no idea how to do that. I'm almost certain it has to get tagged by a fire company and they are the ones that installed it for me.

  • @nicholasalexander8069
    @nicholasalexander8069 Год назад

    When you're putting the docket through the hole. What do you use to seal it? Does it have to be welded? What can you use a high temperature gasket?

  • @elmaikonay552
    @elmaikonay552 3 месяца назад

    Los honguitos estos se pueden instalar hacia los lados ? No es para una food truck aclarando

  • @outsidedog1535
    @outsidedog1535 2 года назад

    Hey brothers I was hoping you could help. I bought a sure flow 12v water pump I have a 110/ 12v converter. No mater how I hook it up it just humms and doesn't pump. They sent me a replacement and the same thing. Pump has a red and a black wire converter has a white and black. I have water going to pump but nothing goes through

  • @BanhSizzle
    @BanhSizzle Год назад +1

    What type of screws are used to attach the flat plate and also the fan where it is attached to the vent hole? Are they sheet metal screws? Thank you

    • @fbaltierrez
      @fbaltierrez  Год назад

      I use these.
      amzn.to/3FrNPGf

    • @Jonatone
      @Jonatone Год назад +1

      @@fbaltierrezgreat thank you! Follow up question, are those screws screwed into anything or just holding the two metal pieces together? I’m talking about both the the flat sheet and the hood fan. Thanks again. Great videos!

    • @fbaltierrez
      @fbaltierrez  Год назад

      @@Jonatone just screwed together by themselves is how I did it

  • @marcelsmith2942
    @marcelsmith2942 9 месяцев назад +1

    Hello what is the size of the over size washers that you got from ACE hardware? I am waiting on my hood from hoodmart. I just want to get all the small parts as I wait. Also what was the size and length of the galvanized bolts you got from home depot.

    • @fbaltierrez
      @fbaltierrez  9 месяцев назад

      They are the biggest ones you will see on the shelf. If I remember correctly a out 4 inches wide and very thick. Bolts longer than 3 inches you can cut them anyways

  • @marcelsmith2942
    @marcelsmith2942 9 месяцев назад

    Hello what is the size of the washers that you got from ACE Hardware. I am about to install my 8ft hood?

  • @cindymendoza5612
    @cindymendoza5612 2 года назад +1

    Can you please do a video showing how to install the lights in the hood

    • @fbaltierrez
      @fbaltierrez  2 года назад

      I personally don't Install the lights on the hood. I don't need them I have plenty of light from my LED lights. Wouldn't be able to tell you how to wire those. It's not worth the hassle to install them if you have bright lights

  • @lorileispencer7706
    @lorileispencer7706 Год назад

    I'm having trouble with the Amazon link you provide on several of your videos for the 6/0 wire. Can you please double check that? And provide a better link?

  • @edrumfelt6230
    @edrumfelt6230 2 года назад +1

    Did you have to predrill all the stainless steel screws in the duct? Or did you use self tappers. I’ve been catching hell with stainless self tappers into stainless sheets

    • @fbaltierrez
      @fbaltierrez  2 года назад

      Yes if they are burning out. Use a cobalt drill bit. Life saver

  • @katrinadillard6927
    @katrinadillard6927 2 года назад +1

    Frank I purchased hood vent package from hoods mart. I was told I have to get the lights tigwelded because they were not attached. Also it didn't come with any pre drilled holes. What can I do to get installed?

    • @fbaltierrez
      @fbaltierrez  2 года назад

      I don't Install lights in mine, it's not required and I have plenty of light in the trailer with the lights I install

    • @katrinadillard6927
      @katrinadillard6927 2 года назад +1

      @@fbaltierrez so I just need big bolts to screw through the metal. The guy thought there should be holes for the bolts.

    • @katrinadillard6927
      @katrinadillard6927 2 года назад

      @Frank baltierrez could this be installed less than 8 hours or is that the minimum? How much would you think an installer should charge for this type job?

    • @fbaltierrez
      @fbaltierrez  2 года назад +1

      @@katrinadillard6927 you make your own holes and cuts. $1,000 Give or take a few $$$

  • @danielvilacha3545
    @danielvilacha3545 11 месяцев назад +1

    The hood Installation can you do id yourself on any state or on IL is allowed? I live in Florida and I believe I remeber someone from PA saying he had someone installing that i dont know if he just didnt want to do it himself or alse. where can i get that information?

    • @fbaltierrez
      @fbaltierrez  11 месяцев назад +2

      The only thing I have seen that makes the build different is in California they require certain types or windows and floors. Haven't heard of anything from other places

  • @JsStokeHouse
    @JsStokeHouse Год назад +1

    Was that a fork you were using to install the Flex Seal???? Def a "Pisa" Lol orale

    • @fbaltierrez
      @fbaltierrez  Год назад

      It doesn't get installed it gets spread around and yes I was

  • @mattsimon8717
    @mattsimon8717 2 года назад +1

    Frank, I have a question for you. When doing your grey water drain, where did you get your grey water hose to fit your 1 1/2 drain pipe? Love your videos and have been so helpful!! Hoping to open in about a week and a half!

    • @fbaltierrez
      @fbaltierrez  2 года назад

      If you refer to the one that comes from the fill valve to the tank. That's from class a customs

    • @mattsimon8717
      @mattsimon8717 2 года назад +1

      I meant the drain line from the grey water tank. When watching your video it shows the 1 1/2 line running out to the gate valve. Where did you find a grey water drain hose to fit 1 1/2” pipe? Thanks again!!

    • @fbaltierrez
      @fbaltierrez  2 года назад

      @@mattsimon8717 I show another part there where you can add a hose to it on the gate valve for a 3/4 hose I believe it was

    • @fbaltierrez
      @fbaltierrez  2 года назад

      @@mattsimon8717 amzn.to/3Gro88J

    • @mattsimon8717
      @mattsimon8717 2 года назад +1

      @@fbaltierrez fantastic, thanks so much!! I really appreciate all you do for us!! Keep rollin! 🙂

  • @Antonfootball96
    @Antonfootball96 Год назад +1

    Loving these videos! How much would you say everything cost in total and how long did it take you to complete?

    • @fbaltierrez
      @fbaltierrez  Год назад +1

      Time- if you work on it daily and consistently easily 3-4 weeks. Money-hard to answer because equipment brands change price is it new or used. Materials inside same. But I spent about 13k not counting trailers

  • @lokachon123
    @lokachon123 5 месяцев назад

    Do you do your own work on the fire suppression system?

    • @fbaltierrez
      @fbaltierrez  5 месяцев назад

      @@lokachon123 if you mean install my own, I do not. You need a special certification for that

  • @nicholasdewey5093
    @nicholasdewey5093 2 года назад

    Hey Frank, do you know approximatelyhow heavy a Ansul system weighs on a 6 ft hood with 3 appliances? I have to keep all cargo under 3700 lbs, I may get ahold of you for the consultations in the near future

  • @ceearieajones3888
    @ceearieajones3888 Год назад +1

    Hi Frank, I have a question, what size is your exhaust fan roof curb ?

    • @fbaltierrez
      @fbaltierrez  Год назад

      You mean the actual fan height? The one that sticks up from trailer

    • @ceearieajones3888
      @ceearieajones3888 Год назад

      Yes or can you send the link for the kit from hood mart ? I bought a vent hood and exhaust fan but it didn’t come with I need for the roof.

    • @fbaltierrez
      @fbaltierrez  Год назад +1

      @@ceearieajones3888 www.hoodmart.com/concession-hood-system-7-x-30.html

  • @berniel3358
    @berniel3358 Год назад +1

    Do you live in Chicago city or suburbs I live in Belvidere illinois maybe you can help me out since I d9 t have the bracket to installment fan where can I buy it for very low price since money is a issue here?

    • @fbaltierrez
      @fbaltierrez  Год назад

      Live in Chicago suburbs. Which Bracket are you referring to?

  • @franks4407
    @franks4407 2 года назад +1

    Se puede usar un estractor regular de cocina?

    • @fbaltierrez
      @fbaltierrez  2 года назад +1

      Eso es pregunta que el department de Salud te tuviera que decir. Pero mas probable es que no pero uno nunca sabe

    • @franks4407
      @franks4407 2 года назад

      @@fbaltierrez muchas gracias Frank

  • @kevinconner8976
    @kevinconner8976 Год назад +1

    Good Evening… do you install for customers… I’d rather pay to have it done?

    • @fbaltierrez
      @fbaltierrez  Год назад

      Good afternoon, unfortunately I do not.

  • @sarailao7049
    @sarailao7049 2 года назад +1

    Frank, Can I order a food trailer from you and 7x10 ? I've been watching your video a lot but sad to say I can't do it myself

    • @fbaltierrez
      @fbaltierrez  2 года назад

      Good afternoon. Unfortunately I don't build custom trailers. The only one available is this red one 7x16 and this will be the last one I build.

  • @ashleyosorio8477
    @ashleyosorio8477 2 года назад +1

    Hi , what county are you located in ? I’m in San Bernardino county looking to build one .

  • @junkcarz4720
    @junkcarz4720 Год назад +1

    What size window you put in

  • @tonygunnz515
    @tonygunnz515 2 года назад +1

    Can I pay you to rebuild my trailer

    • @fbaltierrez
      @fbaltierrez  2 года назад

      Unfortunately this is my last build. I am here for private 1 on 1 consulting if anyone needed it

  • @marinachomendia
    @marinachomendia 2 года назад +1

    Hi frank I send you some pictures te acuerdas que te pregunte por mi hood system

    • @fbaltierrez
      @fbaltierrez  2 года назад +1

      Ya Los recibi. Looks real good. RV to Food Truck

    • @marinachomendia
      @marinachomendia 2 года назад

      @@fbaltierrez gracias bro en gran parte tus vídeos motivan mucho y son muy educativos Grasias por tu trabajo y tiempo maestro

  • @JoseDiaz-jn5dj
    @JoseDiaz-jn5dj 2 года назад +1

    Why you never talk about prices how much money you spend in exhaust fan and whatever you put in the trailer we want to know money wise

  • @ontourwithironman6684
    @ontourwithironman6684 Год назад +1

    Frank your voice jesters & automation is like your talking to a group of girls wanting g them to like you. This is very annoying. Your video presence would improve if you were more direct..