Hey, great pronounciation. The bag is original, I have the same but green. The symbol is Sigma Olomouc logo, company that made these filters. If you want to buy any czech stuff, I can help you. It is dirty cheap, like 5 pounds for mask and 3,50 for canteen. Greatings from Prague.
Hi I'm Czech, I have the m10m and the cm3. Finally our inventions getting recognized, thank you for uploading these videos. The trident is most likely the manufacturer of the filters
You should eventually get OM-90 which is gas mask in current use by czech military. I've heard it's quite good and I would be interested in your review of it.
Also I just wanna say thanks for informing me about gas masks I don't think any channel other than yours makes content literally perfect for this subject
Hi, I just bought an M10 and I have a question, Im planning to use it next year and not now, until then, is it bad if I install the filters and keep the mask in its bag or its better to open the filters and install them before I use it... And also after I use it (for cs protection) one time, probably for 2 hours, the filters are useless or i should store them to use them again? Sorry for bad english:3
i have a CM4 myself and it fits fine on me, good airtight seal and no air seeps in at all, maybe it's because my facial structure isn't the same as yours? I'm not quite sure. But about that warsaw pact filter you had, would you consider that one safe or no? my CM4 came with that exact one and im not too sure if i should buy a NATO one for my CM4
Yes it's the same issue as the M65, if you have the perfect face shape for the mask size it will fit fine, otherwise it leaks, they are generally considered bad masks for their shoddy peripheral seals. As for the Czech filters, as said in the video, I personally wouldn't use them.
yeah i really like the cm4 since i live in czech republic it costs here only like 125czk that is like 5 eruos so it is a very affordable gas mask from czech masks i also have the modern cm6 which is a very good mask in my opinion anyways nice video as always :)
I know this vid is kinda old. But to answer your question about the "trident", it's nothing too special. If I'm correct that's the Sigma company logo, the company who (if I remember correctly) is responsible for the MOF series.
10:25 that's logo of Sigma pump. In communist time, they were making filters. Just simply search Sigma pump logo and you'll find it. (Also sorry for my english)
the CM3 is the return of the Czech darth vadar XD lol but for real the only czech mask i had was the M10M and hopefully ill get both the black and grey GP-5 with the hose and coffee can filter for only 10 USD.
No offense, but shouldn’t the title be “Czechoslovakian” gas mask collection? All these masks are from the period when the two countries were one, hence Czecho (for the Czech part) and Slovakia( for Slovakian part). Saying that it’s “Czech” is not correct as it imples the masks are solely from the Czech Republic, which didn’t exist until the split in 1993.
Weaponsandstuff93 yes I know (gumarny zubri etc.), I’m just saying that the masks are from the period when it was one country (even though the languages are different) it could be perceived as discriminative - it’s like saying a Czechoslovak person is a Czech, while it could be either a Czech or a Slovak person, a concept many westerners don’t always seem to grasp. Sorry if I sound bitter, but I think I know a bit more about it considering I’m Slovak and a mask collector
hay this is not czech mask this is czechoslovakia gas mask and this is very good video i'am from slovakia and aim very like watching you videos pls czech or slovak subtiles
Could you make the m10m a safe mask by attaching the hoses , taping any converter with the 40mm nato port and attaching a nato filter , if so that’s 2 birds with 1 stone , a safe mask and it’s no longer a cheek filter mask (to a extent, at least you can change the filters)
I have a weird Czech cm3 the valve is black and doesn't have a neck carry strap but the rubber of the Czech one its like a mix of the polish and Czech masks
Denmark never domestically made masks as far as I'm aware they just bought masks from other countries, I do have some British masks that were sold to Denmark then sold back as surplus
@@Weaponsandstuff93 we only had 2 we made by us self but its a ww2 1938 gas mask made from leather and its bad :( i have it yay (if i could i would send you a picture of it :D)
You are great
Hello from Czechia
Ahoj z Česka
Glad you enjoy the videos.
Heeey haha good stuff my friend :) i have one of those
Cool which one do you have?
i think first crappy one :D i dont even know if its functional like you said in your video about filter
Well at least it will protect from tear gas.
Weaponsandstuff93 with added asbestosis just what santa wanted
Hey, great pronounciation. The bag is original, I have the same but green. The symbol is Sigma Olomouc logo, company that made these filters. If you want to buy any czech stuff, I can help you. It is dirty cheap, like 5 pounds for mask and 3,50 for canteen. Greatings from Prague.
Thanks for the info, yeah some people don't seem to understand that gas masks often came in different satchels which is a bit weird.
Weaponsandstuff93 Thank you too. If you need to translate anythink or find more info, I would really like to help you.
where can i buy the stuff
@@whileecoyote8719 eBay
@@whileecoyote8719try czech army surplus shops on internet
I liked this video
At least someone mentioned Czech/Slovakia
0:00 yeah a bit correct
Ahoj zo Slovenska 😀
I'd say honestly cheek filter gas mask would be great design if you'd figure filter change problem out.
If Cheek filter masks didn't have cheek filters then they'd be perfect.
Weaponsandstuff93 he he he damn right
Perhaps the hose on m10m can be attached to either 40mm gost or something maybe
@@CreativeUsernameHere-r1k it's a rebreather set
@@Rekonsoepic yeah i know, but perhaps we can mod it...
The best possible start of the video, appreciate it and love the "Ahoj":D
Great video, these small collection video's are now one of my favourite video's. Nice job.
Glad you like them, I'm probably going to be doing a video on my German masks next.
Weaponsandstuff93 yeah that will be good
Hi I'm Czech, I have the m10m and the cm3. Finally our inventions getting recognized, thank you for uploading these videos. The trident is most likely the manufacturer of the filters
Thanks, somebody else said that a bit earlier, I was thinking it was some sort of civil defence logo, but a manufacturer makes more sense.
You should eventually get OM-90 which is gas mask in current use by czech military. I've heard it's quite good and I would be interested in your review of it.
That tridon (or how ever ypu spell it) is a logo of a company called SIGMA. They make filters and stuff like that.
Also I just wanna say thanks for informing me about gas masks I don't think any channel other than yours makes content literally perfect for this subject
And lighters,crossbows, nbc suits and prepping
Glad you like the videos.
I love that you are a youtuber that answers questions
Cheers
cool wideo
ahoj from czechia
Hi, I just bought an M10 and I have a question, Im planning to use it next year and not now, until then, is it bad if I install the filters and keep the mask in its bag or its better to open the filters and install them before I use it... And also after I use it (for cs protection) one time, probably for 2 hours, the filters are useless or i should store them to use them again? Sorry for bad english:3
Your English is great and either thing should be fine.
That thing on the filter is logo of the company which created it. PS: I like your videos!
Cheers a few people have told me since doing the video.
i have a CM4 myself and it fits fine on me, good airtight seal and no air seeps in at all, maybe it's because my facial structure isn't the same as yours? I'm not quite sure. But about that warsaw pact filter you had, would you consider that one safe or no? my CM4 came with that exact one and im not too sure if i should buy a NATO one for my CM4
Yes it's the same issue as the M65, if you have the perfect face shape for the mask size it will fit fine, otherwise it leaks, they are generally considered bad masks for their shoddy peripheral seals.
As for the Czech filters, as said in the video, I personally wouldn't use them.
CM-3 is Good Piece of Czechnology
Exactly
Cool introduction
Cool vid , i have CM-4 at home ;)
Cool
What Czech gas mask do you think is the best? (from this video).
CM4
00:01 totally correct I'm 🇨🇿
Eyyy, I have a M10.
i didnt even get a bag with my M10m
Bought a m10 gas mask for 8 dollars in a airsoft shop in Prague, with a unique bag. my first gas mask too
Cool, not any good for airsoft though, you'd probably get your eyes shot out.
The M10 gives me the Enclave vibes
Yeah cheek filter masks are very fallout looking
yeah i really like the cm4 since i live in czech republic it costs here only like 125czk that is like 5 eruos so it is a very affordable gas mask from czech masks i also have the modern cm6 which is a very good mask in my opinion anyways nice video as always :)
Cool
The straps in my CM4 do a similar thing where they refuse to give.
Can you do a review on the mark iii
Navy gas mask with the weird lenses and hoses
Thank you for your good videos
If it's a US mask they are very hard to get a hold of outside of the US so probably not.
I know this vid is kinda old. But to answer your question about the "trident", it's nothing too special. If I'm correct that's the Sigma company logo, the company who (if I remember correctly) is responsible for the MOF series.
Correct, had a few other people tell me that but thanks.
10:25 that's logo of Sigma pump. In communist time, they were making filters. Just simply search Sigma pump logo and you'll find it. (Also sorry for my english)
Cheers
the CM3 is the return of the Czech darth vadar XD lol but for real the only czech mask i had was the M10M and hopefully ill get both the black and grey GP-5 with the hose and coffee can filter for only 10 USD.
Cool.
No offense, but shouldn’t the title be “Czechoslovakian” gas mask collection? All these masks are from the period when the two countries were one, hence Czecho (for the Czech part) and Slovakia( for Slovakian part). Saying that it’s “Czech” is not correct as it imples the masks are solely from the Czech Republic, which didn’t exist until the split in 1993.
Because all of these masks are made by Czech factories not Slovakian factories.
Weaponsandstuff93 yes I know (gumarny zubri etc.), I’m just saying that the masks are from the period when it was one country (even though the languages are different) it could be perceived as discriminative - it’s like saying a Czechoslovak person is a Czech, while it could be either a Czech or a Slovak person, a concept many westerners don’t always seem to grasp. Sorry if I sound bitter, but I think I know a bit more about it considering I’m Slovak and a mask collector
Do you have any french gas masks?
Yes ANP M51.
Ahoj ! :D
For me most czech masks need to be super tight on the upper-side straps and top ones need to be tighter than usual 6/5 strappers...
Nice video
Thanks
Im from czechoslovakian and ahoj is corect
I think you schould get FM-3d its a really cool mask.
M10 gas mask is more comfortable than its clone, polish MP4. A quality of head stripes is also better - they are much more resistant and durable.
The MP4 is not a clone of the M10, All of them are based on the American M17.
Weaponsandstuff93 Yes, I know, but they were both "stolen" from USA M17 and next each Warsaw Pact country made its own clone.
I keep my gp5 in a random surplus bag luckily I don't create RUclips videos to have stupid people telling me it's fake 😁
Yeah lots of weirdos out there.
hay this is not czech mask this is czechoslovakia gas mask and this is very good video i'am from slovakia and aim very like watching you videos pls czech or slovak subtiles
I have these all
Cool
Could you make the m10m a safe mask by attaching the hoses , taping any converter with the 40mm nato port and attaching a nato filter , if so that’s 2 birds with 1 stone , a safe mask and it’s no longer a cheek filter mask (to a extent, at least you can change the filters)
Not really as the pipe can't sit on the mask without the original M10 filters inside.
It's best just to get a NATO mask really.
Oh yeah
Would you rather use a Avon FM12 or a S10 for the field
FM12
Bleviet stalib!
Do a video on british gas masks maybe called my british gas mask collection
He did and it’s quite long just scroll down a bit
Can you do a vid on a German mask collection like you did with British in the order they are in
I will at some point.
I have a mouth deform and I drool sometimes and I was wondering if my Gp5 would get hurt if i drooled in it.
No, the good news is the exhale valve being at the bottom means that the saliva would flow out the mask when you breath out for the most part.
Filter is mof 4
Hello from czech
Hello
I have a weird Czech cm3 the valve is black and doesn't have a neck carry strap but the rubber of the Czech one its like a mix of the polish and Czech masks
Thats polish mc1 (maska cywilna 1)
@@jaczech_2876 thanks mate
@@alfieogden no problem, ive got video about it on my chanel, but its in Czech
Did u buy ur check mask from the prepperd uk store
No
Weaponsandstuff93 oh just cause i seen a m10 and a few others on there for very cheep like 12.99 and 10 .00
They are very common on the surplus market.
Weaponsandstuff93 ahh i own a gp5 myself i find it alot more comfortable than a m65 drager
I have the CM-4 in dark green color, what does that mean?
Its probably not cm4 because it was maden only in this colour
@@exodus9448 on it it saya cm-4
You never know I could have been left on sun and went Darker idk
So do these masks contain asbestos?
Masks don't contain asbestos, the filters no idea.
Weaponsandstuff93 thats what i meant, sorry, tha ks tho
The filters are MFO, most of the Czech filters do not contain asbestos.( they just do not contain asbestos)
@@cor1698 its not MFO, its MOF (malý ochranný filtr)
Czechoslovakia is a interesting country
Well it's Czech Republic now and Slovakia, both separate countries.
Yeah, but i still prefer to call it czechoslovakia.
@@whodis375 but such country doesn't exist :-D
What do you find is the best gas mask you own?
T T it's the Avon ct12 (I'll edit 7 this is the wrong name)
Correct.
pls can u do a collection vid on ur American gasmasks
I will at some point, but I don't have all that many American masks.
You should get a gorka suit.
Don't really feel like paying £100 for a fancy boilersuit.
I have one its the polish mouse
Ahoj kamarade
ahoj
I have this gas mask and the filter wont come off
I have cm4 And I whore it with the filter idk if im gonna die.
I have three gas masks a smsh41 an 2 s10's
Cool
You should get a French tc38 and were it but not breath in it of course
If I see one for sale for cheap sure.
Rabbitpower *wear
Jak se maš
Dobře.
Dobře
I say someting
ejj i am chzech
ahoj z česka
10:48 that's polish
No it's not it's the Czech CM-3, you're mistaking it for the Polish MC-1
No, it isnt
česko
I know how to speak czech
I like everything about Czech army but The m-14 gas mask is ugly that's just my opinion
Usb us🅱
First comment
The trident logo belongs to manufacturer- Sigma Lutín
These czech filters are MOF filters. These filters are without asbestos so they are safe :)
Do you have danish gas masks?
Denmark never domestically made masks as far as I'm aware they just bought masks from other countries, I do have some British masks that were sold to Denmark then sold back as surplus
@@Weaponsandstuff93 yeah... Like the c3 respirator (we dont use it now days) we use avon s10 now and its great
@@Weaponsandstuff93 we only had 2 we made by us self but its a ww2 1938 gas mask made from leather and its bad :( i have it yay (if i could i would send you a picture of it :D)
Ahoj
Ahoj