How to connect DRL to High Beams on a Volvo xc90 in less than 10 minutes.

Поделиться
HTML-код
  • Опубликовано: 4 окт 2024
  • This video will show you how to connect your DRL so when you switch to High Beam, they (DRL) turn on too. - The flicking at the end of the video on the position light is due to the 4K camera I used which has a bigger refresh rate than the LED itself. In real life, your eye can't see it.

Комментарии • 41

  • @tomhite3510
    @tomhite3510 9 месяцев назад +1

    Excellent~ Video. Previously, I have never had these inner bulbs go on. Ever.

  • @borusiewicz5770
    @borusiewicz5770 3 года назад +3

    OUTSTANDING Modification!
    1000% better on my 2011 XC90.
    Thank you for the tip.
    Another tip for you XC90 owners, adjust the tilt of your Xeon beams. They come from the factory tilted down too much and there is an adjustment on the top to raise it up so that the beam is thrown further down the road as you drive.

    • @fgc-ol4jn
      @fgc-ol4jn  3 года назад

      Can you show on a video or picture where the adjustment is ?

    • @borusiewicz5770
      @borusiewicz5770 3 года назад

      ruclips.net/video/1KdEgtfziBE/видео.html&ab_channel=Grow209

    • @borusiewicz5770
      @borusiewicz5770 3 года назад

      @@fgc-ol4jn
      ruclips.net/video/1KdEgtfziBE/видео.html&ab_channel=Grow209

  • @georgeferrer23
    @georgeferrer23 5 лет назад +4

    Thanks for showing this video, i did the same thing to my 2014 xc90 and it worked well.

  • @chrisbailey9308
    @chrisbailey9308 3 года назад +1

    Thank you! Been trying to work this out for over 2 years. We have a USA spec xc90 and the headlights were terrible.

    • @universecorrupted
      @universecorrupted 3 года назад +2

      Glade it was able to help. Remember though that doing this won't make it brighter at night. People will see you better, but that's about it. The brightness of a headlight beam depends on the inside reflectors. The DRL are meant to be seen, but not to lite the road in front of you..

  • @ramonrivera7233
    @ramonrivera7233 2 года назад

    Awesome mod!! Works perfect on my 2005 Volvo XC90 V8 AWD, but you have to do both sides, not just one headlight side, thank you

    • @fgc-ol4jn
      @fgc-ol4jn  2 года назад

      Correct, both sides need to be done.

    • @nilssjoberg2522
      @nilssjoberg2522 2 года назад

      @@fgc-ol4jn for it to work at all? Or does this only work for European models?

    • @fgc-ol4jn
      @fgc-ol4jn  2 года назад

      @@nilssjoberg2522 As long as the headlight block is the same -I am pretty sure they are- it will work. You also have to check in Europe to make sure that your DRL is the headlight in the block and not the FogLight as some newer model had.

    • @nilssjoberg2522
      @nilssjoberg2522 2 года назад

      @@fgc-ol4jn so if the fog light is the DRL it won't work? I have a 2013 with the fog light DRL and it annoys me that inner light doesn't do anything

    • @fgc-ol4jn
      @fgc-ol4jn  2 года назад

      @@nilssjoberg2522 If your DRL is fog light, what is the relationship between the 2 bulbs in the headlight? Low and high beam?

  • @terrywood3741
    @terrywood3741 Год назад

    Do you have to do both sides? And, after you make that jump between 1 & 6 terminals, will you DRL's still function as before, besides now coming on with brights?

  • @Realcjs
    @Realcjs 3 года назад

    You should use a relay for this mod.

  • @Thebig-z4n
    @Thebig-z4n Год назад +1

    Hello does the existing function work properly even if I remove the device connected to that connector?

    • @simontemplar7515
      @simontemplar7515 Год назад

      You are not removing anything. Just unplugging, so you can hijack the wire, then plug it back.

    • @Thebig-z4n
      @Thebig-z4n Год назад

      @@simontemplar7515 I mean, I wonder if it's possible to restore the high beam function. I’m sorry

    • @simontemplar7515
      @simontemplar7515 Год назад

      @@Thebig-z4n the high beam function is not lost at all when you do this.

  • @terrywood3741
    @terrywood3741 Год назад

    Do the DRL's still function as they were intended, after adding a connection to high beams?

  • @danbarbary9791
    @danbarbary9791 5 лет назад

    Hi thanks for the handy video. One question. Do the DRLs come on as well during the day when the they normally would?

    • @fgc-ol4jn
      @fgc-ol4jn  5 лет назад

      Hi ! - The DRL will stay on during the day, if you have your switch (North America) to 0.
      At night, as usual, it automatically switches to BiXeon or whatever you have.
      High beam will be regular high beam + DRL
      But remember, DRL are not bright since they are not intended to illuminate the road again.
      This is just a cool add-on.

    • @jzzanetis
      @jzzanetis 4 года назад

      fgc92210 thank you but what switch??

    • @Driftdavillian
      @Driftdavillian 4 года назад +1

      In North America the headlights are programmed for the DRLS to be on in the daytime. When you turn the headlights on DRLS go out. This is when this mod takes effect. If you want your DRLS programmed to off at all times you will need a laptop to do so with the appropriate Volvo propriety software.

  • @tombalazs5914
    @tombalazs5914 2 года назад

    Great mod! I own a 2014 XC90 and live in the US. My DRL's in the headlights are always off, no way to turn them on, but the LED fog lights operate as DRL's. Do you know if I can connect the parking lights to come on with my fog lights as DRL accents?

    • @fgc-ol4jn
      @fgc-ol4jn  2 года назад

      You need to use VIDA software. Most likely your mechanic can help with this :)

    • @nilssjoberg2522
      @nilssjoberg2522 2 года назад

      Did this mod work for your 2014?

    • @tombalazs5914
      @tombalazs5914 2 года назад

      Never tried it

  • @MiguelRibera
    @MiguelRibera 6 лет назад +1

    This modification also run in a 2009 Volvo V70?

    • @anotherviewforus
      @anotherviewforus 6 лет назад

      Miguel Ribera / if you connector type is the same then yes. Post a picture and I will tell yuu

    • @MiguelRibera
      @MiguelRibera 6 лет назад

      anotherviewforus thanks. And decrease the intensity of the Highbean when is on like DRL?

    • @simontemplar7515
      @simontemplar7515 6 лет назад

      No, it does not decrease the intensity. Each wire are connected to a different circuit board which gives the same amount of voltage.

    • @tmbardsen88
      @tmbardsen88 2 года назад

      Just upload software for EU instead?

  • @stifler9660
    @stifler9660 4 года назад

    Does this mode also apply to 2010 Volvo XC 60 Europe? Has anyone checked it? Thank you.

    • @fgc-ol4jn
      @fgc-ol4jn  4 года назад

      Hi. I never tried on any other model.

    • @stifler9660
      @stifler9660 4 года назад

      @@fgc-ol4jn Thanks.