They’re still holding up only thing that’s changed is passenger side is a bit slower. I feel I need to get more power to them but I haven’t given the truck much attention lately. But will do an update on them 🙏🏻
Running off the cruise control fuse & I removed the panel under the steering wheel and ran the wires through there. Then pushed them up into the passenger side to conceal them along with my ac fan wires.
Hey man can you please post a pic where exactly you connected the wires to give the windows power? I was thinking of doing this to my 06 duramax it has manual windows but I wanted to put oem power door panels and the window switches and wire it that way. But I will have to use the 03-06 door panels and 99-02 switches. Since the 03 runs off the bcm and the 99-02 you can just run a ground a power to it
Sorry John I’m just checking on my RUclips now since I’ve been busy moving. I will get some pictures today of where all the power & ground wires are connected to.
Your switch was right, you’re backwards. The bump up is up the dip down is down, that way you can do it without looking. Great vid, great job.
Can you do a video how did you wire up the amazon kit? Also do you have electric door locks? If so how did you wired?
Can you do a update vid if they kept working since they been installed and what else has changed since then
They’re still holding up only thing that’s changed is passenger side is a bit slower. I feel I need to get more power to them but I haven’t given the truck much attention lately. But will do an update on them 🙏🏻
Where did you take the wires into? What fuses?? Want to do that conversion
Running off the cruise control fuse & I removed the panel under the steering wheel and ran the wires through there. Then pushed them up into the passenger side to conceal them along with my ac fan wires.
That's how I got mines on a 2door 08 f150. But the passager side rolls down fast but go up slow. Driver side is perfect. If u know why let me know.
Man bro dats awesome 👌 BEAST MODE 💯
Thank you I appreciate it 🙏🏻
Hey man can you please post a pic where exactly you connected the wires to give the windows power? I was thinking of doing this to my 06 duramax it has manual windows but I wanted to put oem power door panels and the window switches and wire it that way. But I will have to use the 03-06 door panels and 99-02 switches. Since the 03 runs off the bcm and the 99-02 you can just run a ground a power to it
Sorry John I’m just checking on my RUclips now since I’ve been busy moving. I will get some pictures today of where all the power & ground wires are connected to.
@@Angel_TheKeep ok please let me know, thanks
@@OGKILLa9365 hey I’m working on a video today of new parts I just got first part of the video will be addressing the power windows l.
@@Angel_TheKeep I'll check it out man. Thanks!
@@OGKILLa9365 check it out, I hope that helps!
Hey bro did you do the locks too and if you did or are going to lmk how
No I did not bro. Probably do them sometime this month and do a video on it aswell.
Can we get an update on the power windows?
New video going up tomorrow of an update for everyone & new parts
No lleva relays?
Solo fusible como viene todo el harness cuando lo ordene.