SolidWorks tutorial | How to make Allen Bolt in Solidworks

Поделиться
HTML-код
  • Опубликовано: 30 сен 2024
  • / @cadcamtutorialbymahta...
    You Can Support our Channel for more tutorials.
    in this tutorial video i will show you How to make Allen Bolt in Solidworks...& i hope you will enjoy the tutorial, please subscribe our channel for more videos & projects in solidworks & dont forget to hit like & share the videos, thanks for watching.
    AMAZON INDIA
    3Dconnexion 3DX-700028 SpaceNavigator 3D Mouse
    amzn.to/2xGprwt
    3Dconnexion 3DX-700043 SpaceMouse Wireless
    amzn.to/2iSTC07
    SpaceNavigator Notebooks USBF/ NOTEBOOKS USB
    amzn.to/2wyoCpE
    Hermitshell Travel EVA Protective Case Carrying Pouch Cover Bag for 3Dconnexion SpaceNavigator 3D Mouse 3DX-700028 3DX-70034 3DX-70043 Colour: Black
    amzn.to/2gBRlWI
    Mivi Thunder Beats Wireless Bluetooth Earphones with Stereo Sound and handsfree mic (Gun Metal)
    amzn.to/2xH5V3c
    TeckNet Pro 2.4G Wireless Mouse,Nano Receiver,6 Buttons,24 Month Battery Life,2400 DPI
    amzn.to/2eyVIAW
    SOLIDWORKS BOOKS
    AMAZON INDIA
    Solidworks 2016: A Power Guide for Beginners and Intermediate Users
    amzn.to/2x2mJo9
    Solidworks 2017: A Power Guide for Beginners and Intermediate Users
    amzn.to/2eRLdpr
    SOLIDWORKS 2016 BASIC TOOLS
    amzn.to/2evb5Hc
    SOLIDWORKS 2017 Reference Guide
    amzn.to/2wxHvJm
    SOLIDWORKS 2016 Reference Guide
    amzn.to/2wy6Mmq
    Solidworks Simulation 2017 Black Book (Colored)
    amzn.to/2iS2oeV
    Solidworks Simulation 2017 Black Book
    amzn.to/2xGVIUs
    SOLIDWORKS Simulation 2016: A Tutorial Approach
    amzn.to/2gzQi9E
    An Introduction to SOLIDWORKS Flow Simulation 2016
    amzn.to/2guzsW6
    An Introduction to SOLIDWORKS Flow Simulation 2017
    amzn.to/2euX8cj
    / cadcamtutorial

Комментарии • 184

  • @marceloaversa4409
    @marceloaversa4409 5 лет назад +1

    thanks a lot for all your videos im learning a lot!!!

  • @sesarman
    @sesarman 5 лет назад +67

    Allen bolt has never looked so "beautiful" lol

  • @bezechange2634
    @bezechange2634 4 года назад

    keep it up..!!

  • @sajipthasamaraweera4531
    @sajipthasamaraweera4531 3 года назад

    swept cut didn't worked..😑

  • @telelaci2
    @telelaci2 7 лет назад +16

    Its worth to mention that v2016 and higher has a built-in thread feature, don't need to use swept cut, but the Thread Feature, that makes things simpler. But for the earlier versions this is useful.

  • @Cergun_
    @Cergun_ 5 лет назад +17

    That is one dang beautiful bolt, well done.

  • @orthancsmorkaingenjorsbyra6009
    @orthancsmorkaingenjorsbyra6009 2 года назад +6

    As much as I enjoy the film I have to add that using the command "thread" or using a sweep is very intense for the computer and thusly not recommendable for large assemblies. I would highly recommend using the command "cosmetic thread" which creates a callout which you may use on the drawing, but doesn't slow your computer down to a standstill.
    Best of wishes.

  • @jasonvandonsel1384
    @jasonvandonsel1384 4 года назад +11

    I do want to point out for the triangle sketch at the 8:39 mark to 8:50 mark before making the swept cut... you didn't mentioned about the height of that triangle being from the ti point to the horizontal line of the upside down triangle sketch because if the height of the triangle sketch if greater then 1.05 mm or larger then your going to get an error because you will then be overlapping the swepts of the triangle sketch and will not get the full helical swept to be highlighted in yellow. so food for thought i guess... try your tutorial again with a larger sketch of the triangle and you will see that i mean.

  • @keshaborja8564
    @keshaborja8564 8 лет назад +5

    If you want to make your own woodworking yourself just look for woodprix website. There is all you need to make it :)

  • @MdsafiAlam-xw4ki
    @MdsafiAlam-xw4ki Год назад

    How can download SOLIDWORKS software in laptop please help me anyone bro

  • @tetsuo97bjb13
    @tetsuo97bjb13 7 лет назад +9

    The Allen Bolts came in handy when it came to building our robot back when i was in high school in robotics for the FIRST competitions.

    • @CADCAMTUTORIALBYMAHTABALAM
      @CADCAMTUTORIALBYMAHTABALAM  7 лет назад

      its simple project for beginners.

    • @michaelzajac5284
      @michaelzajac5284 6 лет назад

      You mean First Robot.

    • @muhammadibrar4515
      @muhammadibrar4515 4 года назад +1

      @@CADCAMTUTORIALBYMAHTABALAM sir ur tutorial is good....you increased newcomer knowledge....sir kindly will u explain why u took dimensions 6.47/2 during making threads??

    • @BIGNESHO
      @BIGNESHO 2 года назад

      @@muhammadibrar4515 Wikipedia

  • @oualid4441
    @oualid4441 6 лет назад +4

    thank you for this beautiful bolt and your explanation is very good ,continue to make serval video in order to understand solid works thank you

  • @cosmichorizon2775
    @cosmichorizon2775 8 месяцев назад +1

    ❤ Thanks for the Lecture !!!

  • @AnkushSharma-il4xf
    @AnkushSharma-il4xf Год назад

    Not able to make both angles 30 degree one is going to 60 degree driven

  • @jennysqueo3704
    @jennysqueo3704 5 лет назад +2

    One questions sir , inner circle of m8*1.25 = 6.75/2 ?? Or 6.47/2? I have doubt

    • @xl000
      @xl000 4 года назад

      just have a look at the page Filetage_métrique on Wikipedia

  • @mrgallbladder
    @mrgallbladder 4 года назад +2

    It's called a socket head cap screw.

  • @engineerdrawing6039
    @engineerdrawing6039 4 года назад +1

    liked it, i prepare to design it on my channel

  • @TheDiwannaby2
    @TheDiwannaby2 7 лет назад +5

    Great video. And u explain ur steps very easy, so it isnt hard to follow!

    • @CADCAMTUTORIALBYMAHTABALAM
      @CADCAMTUTORIALBYMAHTABALAM  7 лет назад +3

      Thanks, please share our videos which is help us to do more and more in Solidworks,

    • @yerr234
      @yerr234 5 лет назад

      @@michgingras you're english is triple and shod feel bed

    • @sandhyaprabhu6996
      @sandhyaprabhu6996 3 года назад +1

      @@CADCAMTUTORIALBYMAHTABALAM I am recommending everyone around to refer your videos for S.W. Always concise, easy to understand even for people with no modeling software knowledge. We all need a Teacher like you sir.

  • @tim_kk7851
    @tim_kk7851 4 года назад +2

    I can't do the last step when I'm trying to do Swept Cut. Plz help to fix this problem, thx

    • @jarrodvetzel3696
      @jarrodvetzel3696 4 года назад

      I don't know if you solve yet but make sure in the "sketch profile and path" part of the swept cut options, your sketch profile is the small triangle you made and your sketch path is the helix reference you drew. Good luck!

    • @jessefonarcus
      @jessefonarcus 4 года назад +2

      The last triangle height should be less than 1.05mm

    • @Rising_Ballers
      @Rising_Ballers 4 года назад +1

      Jesse Fonarcus ur right

    • @Rising_Ballers
      @Rising_Ballers 4 года назад +1

      Jesse Fonarcus but why ???

    • @MrJameslb3
      @MrJameslb3 4 года назад +1

      @@jessefonarcus That worked! I was getting so annoyed. Thank You!!

  • @balamurugan-fi8dh
    @balamurugan-fi8dh 5 лет назад +2

    i m getting rebuild error , solution please ? advanced thanks .

  • @JagadeshRaoThalur
    @JagadeshRaoThalur Год назад

    I'm almost done, but when i choose swept cut to choose the path for threading, first it's not showing full thread and error message when i click tick mark is "the feature failed to cut the body". what should i do?

  • @JagadeshRaoThalur
    @JagadeshRaoThalur Год назад

    then i fixed the path as i found the error i made, now the new error message is "sweep operation failed to complete"

  • @ashwinkumar4168
    @ashwinkumar4168 Год назад

    Sir swept cut not working

  • @anthonydelgado2430
    @anthonydelgado2430 4 года назад +4

    I can make a many things on solid works and I'm only 12 I have a computer class at school and I have a A+

  • @virendralad5127
    @virendralad5127 4 года назад

    How to create standards parts like Allen bolt, chainwheel, gears, hex bolt, gears with the help of formulas(for their dim.). So we will create it very fast. How to edit standard part of design library.

  • @abundancetv8389
    @abundancetv8389 4 года назад +1

    Nice! And what would be the next step to create it in real world? What printer or tool would you use?

  • @xl000
    @xl000 4 года назад

    Threads are cut on a lathe or pressed with a specialized tool.
    It's not like he's going to send the bolt to be cut on a 5 axis machine anyway, so I assume this is for Viz only.

  • @m.alwahedi95
    @m.alwahedi95 Год назад

    Thanks. How do I choose this shiny steel material that is close to reality? I tried and did not find the same.

  • @BILALAHMAD-bd8rl
    @BILALAHMAD-bd8rl 3 года назад +1

    There is no threads when i apply swept cut

  • @hampymarkarian6819
    @hampymarkarian6819 4 года назад +1

    Last step; i have Rebuild errors (Sweep operation failed to complete) any idea ?

  • @motivationalasraful2517
    @motivationalasraful2517 4 года назад +1

    Super 👍👌👌👌 Sir ❤️

  • @AvikBiswas
    @AvikBiswas 6 лет назад +2

    Why did you convert entities @6:05 minutes?

  • @swaranas5908
    @swaranas5908 3 месяца назад

    Nice

  • @ardoos
    @ardoos 5 лет назад +3

    9:05 choose the path TOU select this path

  • @vasudevraut524
    @vasudevraut524 5 лет назад +1

    Thank you sir
    Sir thread k liye path dimension kaise calculate karte hai plz tell me

  • @lostallmymirth
    @lostallmymirth 5 лет назад

    It must be scary to be sitting in the middle of a busy intersection. Aren't you worried your Solidworks will be damaged when you get run over?

  • @gateway3777
    @gateway3777 4 года назад

    I'm sorry but this is unacceptable

  • @akshaykapoor1965
    @akshaykapoor1965 4 года назад

    thread cut is not applied means sweep cut is not applied i dont know why ... i have 2019 solidworks software ..and i am unable to sweep cut applied in this allen bolt can u tell me why this happend to me

  • @nelsonsaravia3526
    @nelsonsaravia3526 4 года назад

    Too many step for a single bolt screw.

  • @nietzschean6987
    @nietzschean6987 4 года назад

    yr ye horn tu band kar vao background main

  • @jagjivansingh7150
    @jagjivansingh7150 4 года назад

    Sir please powershape ka vi totrel start kre pls

  • @TAINTEDEVOL1
    @TAINTEDEVOL1 4 года назад

    CAN YOU SHOW HOW TO MAKE A 4 PRONG TEE NUT ?

  • @aerospacerc7700
    @aerospacerc7700 4 года назад

    Can you tell the people outside to turn it down!

  • @sthakshay18
    @sthakshay18 Год назад

    Thank you for this lesson.

  • @SaurabhSharma-su2yx
    @SaurabhSharma-su2yx 7 лет назад

    What's the relevance of 6.47/2 in sketch 5? Why not direct 4mm-Chamfer= 3.2mm?

  • @sparkus4229
    @sparkus4229 4 года назад +2

    You're good at it! Great and useful!

  • @yingshanlim8363
    @yingshanlim8363 3 года назад

    How to make a text '12.9' on top of the cap screw?

  • @safiaramdani4366
    @safiaramdani4366 5 лет назад

    I want the download SolidWorks but I can't

  • @narindersingh1293
    @narindersingh1293 Год назад

    Thanks for this information

  • @ssebitaabawamala6861
    @ssebitaabawamala6861 8 лет назад +3

    You are the best

  • @ff_iitrah9884
    @ff_iitrah9884 5 лет назад

    khairunnisa ahmad rusli where are you ??

  • @david2881
    @david2881 3 года назад

    What machine to use to make this?

  • @yugautogeirej3099
    @yugautogeirej3099 6 лет назад

    Bhai Hindi me video banao tabhi shamj me aayega aur aapka video gro karega

  • @CJELCJEL65
    @CJELCJEL65 5 лет назад

    at the 5:50 I do not understand why you make the two triangles ? and 8: 00 why you did another triangle ?

    • @ojas.rastogi
      @ojas.rastogi 5 лет назад

      at 5:50 two triangles are to make a finished surface on the allen bolt head. at 8:00 the triangle is the cutting tool like in machines that will cut through the material to produce the threads. You can also use square instead of the triangle shown at 8:00, that will make square cut instead of triangle.

  • @maheshwarreddy1074
    @maheshwarreddy1074 5 лет назад

    How install window7 solid works Anna
    Super annA

  • @varunvarundm4642
    @varunvarundm4642 5 лет назад +1

    Sir, who much cost of solid work software.

    • @armyson1157
      @armyson1157 4 года назад

      Varun Varun DM 4000 dollars 😂

    • @MECHANICALRocks
      @MECHANICALRocks 4 года назад

      3 LACK IN INDIA - UC4a5VW2SbtCgj7pU4q1EPKg SUBSCRIBE THIS FOR NEW DESIGN AND LEARNING AUTOMATION

  • @kopipahit199
    @kopipahit199 5 лет назад

    Please give me advice for common settings to my Solidwork as easy to use it like yours!

  • @faiyazahmad6940
    @faiyazahmad6940 4 года назад

    English 👌👌🤐🤐

  • @kartiklambole2772
    @kartiklambole2772 4 года назад

    Good done #DESIGNMANSION

  • @STOP532
    @STOP532 4 года назад

    Good

  • @prashantkumar-be1xv
    @prashantkumar-be1xv Год назад

    thanku Sir

  • @pookab5905
    @pookab5905 4 года назад

    can they be saved as a dae file ?

  • @useless9771
    @useless9771 5 лет назад

    _Okae_

  • @kimtienthanh5261
    @kimtienthanh5261 4 года назад

    Thank you sir for sharing

  • @pakarmyisizindabad6206
    @pakarmyisizindabad6206 3 года назад

    Besutiful allen bolt

  • @mazharsener7234
    @mazharsener7234 3 года назад

    Thank you for your effort

  • @nabil97ful
    @nabil97ful 7 лет назад +2

    Why 6.47/2?

    • @CADCAMTUTORIALBYMAHTABALAM
      @CADCAMTUTORIALBYMAHTABALAM  7 лет назад

      Actually the dimension is 1/8 inch & its 6.47/2 mm with tolerance,

    • @parthnikumbh1202
      @parthnikumbh1202 6 лет назад

      Is 1/8 inch as 6.47/2 with tolerance has any relation with Allen bolt dia 8 mm??

  • @alokbaranwal4547
    @alokbaranwal4547 7 лет назад +1

    dear sir please makke a video simple type allen key design

    • @SKRIANSI
      @SKRIANSI 7 лет назад

      Mr Alok Baranwal ,can you visit my chanel. Thax

  • @jidianhuo
    @jidianhuo 5 лет назад

    easy

  • @mohammadimran144
    @mohammadimran144 7 лет назад

    thanks for this sir ! can you tell me which software is best in 3d modling like inventer, solidworks,nx,catia ?

    • @jarrodvetzel3696
      @jarrodvetzel3696 4 года назад +2

      Solidworks is industry standard, and in my opinion easiest to learn with most options.

  • @channelsport6757
    @channelsport6757 6 лет назад

    hi thanks for your tutorials, i wana to do a project of house machine works interiorly that the machine create in solid work and how to be the house interior design in solid work pls help

  • @RajuRaju-fu4tl
    @RajuRaju-fu4tl 5 лет назад

    how to make rc car engene ????.,.

  • @kamiliameziane4536
    @kamiliameziane4536 5 лет назад

    Thanks

  • @ing.juanismaelgomezromo6926
    @ing.juanismaelgomezromo6926 5 лет назад

    and the library?

  • @shafayathossein4429
    @shafayathossein4429 4 года назад

    awsome bro..

  • @manuellando2060
    @manuellando2060 7 лет назад +2

    Thanks.

  • @deepseadeepsea7243
    @deepseadeepsea7243 4 года назад

    Thank you

  • @scientist100
    @scientist100 8 лет назад

    I tried this before and this time again but it is giving me an error (pink lines on spiral) and it does not do the threat sweep cut. Any idea of what could it be? I tried many ways but still the same thing. Thanks!

    • @scientist100
      @scientist100 8 лет назад +1

      I found out that the distance is important, it would not cut if I put 3.24 instead of 6.47/2 that you used. Problem is now solved.

    • @CADCAMTUTORIALBYMAHTABALAM
      @CADCAMTUTORIALBYMAHTABALAM  8 лет назад

      yes distance is important.

    • @guillordz
      @guillordz 7 лет назад

      I have the same problem, but I put the 6.47/2 and the problem still, any help?

    • @guillordz
      @guillordz 7 лет назад +1

      Done, my triangle was too high.

    • @jessefonarcus
      @jessefonarcus 4 года назад +3

      The triangle height should be less than 1.05mm

  • @TheMo7trm
    @TheMo7trm 4 года назад

    you are great!

  • @rushikeshbhalerao6904
    @rushikeshbhalerao6904 5 лет назад

    Which graphics card are useful for this work?

  • @robotdog8713
    @robotdog8713 5 лет назад

    เช่าหูฟัง

  • @HarSHGupTa-xz2pt
    @HarSHGupTa-xz2pt 6 лет назад

    Nice sir..

  • @babakkalantari7843
    @babakkalantari7843 6 лет назад

    Good job

  • @phoenixcreations94
    @phoenixcreations94 5 лет назад

    amazing

  • @uakshay3549
    @uakshay3549 5 лет назад

    When I do revolve cut it s not working

  • @atoztech8859
    @atoztech8859 6 лет назад

    which lap top is best for solid works

  • @innocentpreet100
    @innocentpreet100 6 лет назад

    dear sir kya featurecam mil Sakta apse

  • @mostashiibraheim2630
    @mostashiibraheim2630 4 года назад

    😍

  • @siphilipe
    @siphilipe 6 лет назад +1

    Almost the supersonic speed of my teacher. Anyway, thanks for sharing.

  • @SaurabhSharma-su2yx
    @SaurabhSharma-su2yx 7 лет назад

    Why we are doing revolve cut at 6 mm depth?
    what's it's significance

    • @АзХашми
      @АзХашми 4 года назад

      David Husmann Chill. He’s just asking

    • @MECHANICALRocks
      @MECHANICALRocks 4 года назад

      MAINTAIN THREAD DEPTH - UC4a5VW2SbtCgj7pU4q1EPKg SUBSCRIBE THIS FOR NEW DESIGN AND LEARNING AUTOMATION

  • @mrharsh2845
    @mrharsh2845 5 лет назад

    sir Creo -(pro-E) me sikhaye...please

    • @anactivedesigner
      @anactivedesigner 4 года назад

      I have free solidworks tutorials
      Subscribe me

  • @chrisblight6069
    @chrisblight6069 4 года назад +1

    Very nicely modeled allen bolt. As an acedemic excercise it's great but I wonder if it's practical to have bolts of this quality and complexity in a large assembly. Can you imagine the load on the GPU if you had fifty of these in a large assembly? I did a few of these in my own small assembly and kept them very basic, no helical sweep, just diameters and extruded cut hex. They work just as well.

  • @xdygmnyrdf
    @xdygmnyrdf 5 лет назад +1

    Fusion 360 is so much simpler, in my opinion.

  • @KobraVR
    @KobraVR 6 лет назад

    You are amazing!

  • @raveendrawickramasinghe7213
    @raveendrawickramasinghe7213 7 лет назад +1

    How did you come up with that value 6.47/2? What if I need to make a bolt with different thread? Please explain.

  • @luluuk
    @luluuk 2 года назад

    Great tutorial for beginners. Modelling them like this often. The spiral out at the end is a sweet trick for a quick nice thread end.
    Officially the second (right) triangle for the revolve cut @5:05 isn't correct. This way it also cuts under the straight sides of the hexagon shape.

  • @danhyde7501
    @danhyde7501 5 лет назад

    this doesn't seem accurate as you didn't dimension the cutout triangle? and the threads therefore have flat tops?

  • @nordinenordine7858
    @nordinenordine7858 4 года назад

    thank you for these videos that share. Could you make a drawing with a representation of the thread with isometric view by appearing the thread on this last, please

  • @businessidea9618
    @businessidea9618 4 года назад

    Most worse instructor

  • @kandasamyrajan
    @kandasamyrajan 6 лет назад

    Thanks for the video.