How to fix accord blend door actuator. 04 - 07 accord and TL
HTML-код
- Опубликовано: 21 окт 2024
- How to fix your AC vent. This video shows how to fix the blend door actuator on 04-07 Honda Accord and Acura Tl of the same year. Please use the vin number when ordering the part or you will get the wrong part. I Go over the different between the actuator for the Ex and Lx models in this video.
Great video. It would be great if you clarify that this is for the driver side blend door and clarify if your accord has dual climate control or not. The dual climate control Accord (EX) has a passenger side blend door which is a different part number.
The passenger side temperature motor is the common part that makes the soft clicking noise. The part number is 79170-SDC-A41. This part is also called Air mix motor or blend door for the passenger side.
Thanks for the information. Im sure it will come in helpful for others with this issue on the passanger side.
Thanks!
Helped me with 2007 Acura TSX.
When I turn the AC on in my 04 accord ex the right side passenger is blowing cool air but the driver side is blowing warm, would I replace the driver side actuator or the passenger side?
If the ac is on and the temp is set low. Change the side that is flowing hot air
@@AJIMPORTS alright thank you appreciate it
I have acura tl V6 2006 and passenger side cold air. Does this part shown in your video is the same we can use on passangerside or different?
Same part but the location is different. I believe you have to remove the glove box to see the part.
2005 accord single zone, hot air only come out of all vents. Is there an actuator on the passenger side too or would replacing the one fix all?
The passage side has a actuator also. Once you remove the glove box it will be on the left side
I have 2005 honda accord I changed the heater valve and blendoor acuator same not blowing heat on the driver side. Any advice. Thanks
Take out the actuator and manual move the arm to see if it gives you heat. If that does not work. Clean put the heater core might be clogged.
How to clean the heAter core do you have video on that?
Yea it's under the same name on the channel. Accord with no heat.
What if the heater core is flushed aswlll also @VAL_fam did ya end up fixing it and figuring out what was the prob ?
Hello, i had an Accord 2006 v6 and the heater system don´t works properly, only is on the passenger side is hot, and cold on the driver side. The internal actuator is working and moving the black and White paddles. Also if i change the direction of the air to the foots or windshield the air everytime is on the front vents. Did you know what is the possible cause on my car? The cold AC on both sides is ok only on heater is not working correctly. Also did you know if on the V6 Accords had installed a valve control for the inlet of the coolant to the evaporator?
The control valve is outside on the firewall. If the air is only coming out the front vent then you might have to look into the actuator for the vents mode select. Have to move the glove box to see it. I would check your coolant level first. Then remove the passenger side actuator for the heat. Manually move the arms to see if that change the heat and the position on the control valve on the firewall. These are free steps to help narrow down your issue.
@@AJIMPORTSthanks for your quickly answer, so i take a look on the fire wall and doesn´t look any control valve, just i see the two hoses and in one of those it has a steel pipe, maybe somebody remove and don´t put a new one and only make a bridge. So now i need to find the blue collar that regulates the valve because also i didn´t see.
Google heater core valve. It should be inline on one of those hose going In to the firewall. There is a lever that is attached to a cable that move when you adjust the temp. I have replaced those because they are broken. But try the free method first. Also check the channel I have another video on this same issue and accord. With a more serious heating issue.
On my 07 accord 3.0 , the passenger side air is hot and driver side is cold/lukewarm. i checked the actuator on the driver side and it's functioning properly. i also put in a new heater control valve. i'm not sure what the issue is but one of the 2
hoses isn't as hot as the other one. Any thoughts ?
Take off the cable on the control valve. Manually flip it open to see if both hose get hot. If not then you might have a clogged heater core. Might have to flush it. By opening the valve and turning the temp up. You should see if the actuator are working correctly
Did u turned on ac full first then remove it?
I turn the ac on to test that o was not getting ac on the driver side. Then I removed the actuator.
Can't you leave the blend-door cover bracket in place?
For me it was easier to take it off
Hey man great video. I have a similar problem but it’s my middle 2 (dashboard vents) that don’t blow any air. the other side vents work fine for both heating and cooling. Do you have any idea what the issue might be for me? Technically my AC works just not the middle vents. my car is a 2006 accord btw
Well thats a weird issue. There are 2 actuator that control each side of the car. the system is design that one of the center vent works for the driver and one for the passenger. So for both to not work but the side vents do is weird. How is your mode selection. That changes the vent position. Is that working.
@@AJIMPORTS Yeah that might be my issue, because I do notice that the defrost is always on
might want to start there at the vent position motor.
I have the exact same issue with my middle vents. Following
I have the same problem. Mine is stuck on defrost mode. When I put it in auto or max ac the air is coming from the defrost and two side vents but nothing in the middle have you had any issues or remedies to fix it. I am currently stuck
I have Acura TL V6 2006 and I have no hot air on passanger side. Driver side is ok. What should I do?
Follow the steps in the video but on the passager side. Most likely the same issue
Nice . I have this problem. Hot heat= passg. Driver = warm.
I need the 4cyl, non navi dual climate one. My trim is the EX-L
Best thing is go to honda parts site and use your vin number for the right part. Then get it on Amazon.
Every got this situated I’m having same issue and I got the same model
@nesfinesse6791 start off with these steps. Using honda oem parts is worth the trouble. Check everything. I feel the blend door inside is the issue. The actuator is pricey& i can see "things" move back & forth. Passenger side is cebu city heat. Using a advanced scan tool wasn't applicable to check blend doors. You can take a gamble on the actuator.
@@nesfinesse6791 the hvac box was the problem. When you remove the actuator you are able to move the blend door manually. If the heat works then most likely the actuator is bad. If nothing changes then it might be the hvac box.
Hi
I have the same problem, the side from the driver is blowing cold air. the radiator was flush few times, I replaced the actuator and valve and nothing. please suggest where to look next. thanks
I did another video on that problem. Its the next video after this. The heater box was the problem. I go over sets how to check it out. 04-07 accord no heat issue is the title.
@@AJIMPORTS valve control unit?
I'm having an issue with my 05 acura tsx. When I turn the heat on hot air blows out vents on drivers side but blows cold on passenger side. Could this be the blend door actuator causing this
Yes it can be the same issue but on the passenger side. You can do the same testing method on the passenger side. Confirm its the problem before buying a new blend door motor.
What if i flushed the heater core chaged the valve and i can aee the actuators moving on boths side of my dual climate 2007 accord whats the next please dont tell me heater box
yep, if everything else around the system is working then the heater core box is the issue.
@@AJIMPORTS f.... thanks for quick reply
Better save up now ....
I think I might have the same problem is there usually a clicking or popping noise?
You can here a nose when the gears inside the actuator is broken. But I suggest taking out yours and testing the blend door arms. Make sure they work before you buy a new actuator.
@@AJIMPORTS So the blend door arms the white one and the black one should move freely?
@@AJIMPORTS The blend door arms move freely it was the actuator. I replaced it with a new one and is good now, thanks.
@@mjl6425 happy for you. Winter coming I'm sure you going to need your heat.
I checked both my blend doors on both sides and when I change the temp they both move so I know they work the only one that doesn’t work is the one for the defrost but my passenger side is blowing cool and my driver side is hot I’m confused cause both blend doors move when I change the temp
The best free advise I can give is on the side thats not working correctly. Turn off the car. Unplug and remove the actuator. Then turn on the car and change the temp to max hot and then max cold. Manually change the lever/handle on the hvac box. If that changes the temperature to the correct setting. Then the actuator is bad and has to be changed. If it does not change the temp then you have to take it to a shop. Most likely the hvac box is bad and has to be replaced. Checked out the channel I have another video that goes into additional steps about that issue.
@AJ Imports -- Do you have a link for that part for the Accord V6 with Navigation?
I left the part number in the description. I used honda estore.com
@@AJIMPORTS So aw063800-0080 if for NAVI right? I have a 2006 accord with Navi, driver side blowing warms and gets cold if I hit bump sometimes
@@AJIMPORTS I don't see the part # in the description?
It's shown .25 seconds in the video. It's best to check using your vin number on ehonda store or any only store to make sure you get the right one for your car
Hey bro, am having the same issue, but my actuator seems to be working fine when the temperature is increased or decreased, what else could I check?
Are you getting hot air on the passenger side. I was working on another accord where the actuator was working, I cleaned out the heater core, and installed a new heater valve in the engine bay. But we came to the agreement that it was the hvac box behind the bash that was not closing the vent. So its just letting cold air in. But check the other two area before you start looking into the hvac box
@@AJIMPORTS yes am getting hot air in passenger side, only driver side is cold, with hardly any air coming through, I will maybe attempt the HVAC under the hood, the one that connects to the blue cable? Is that the one you mean? Either way il keep you updated
@@imyarif1359 come back tomorrow i have a video dropping of the accord that has the same issue and shows the steps i took. I flushed the radiator and changed the heater valve. Even changed the actuator with a known good one. And the problem was the hvac box inside the dash board. But watch the video and see if anything can help. Did you remove your actuator and made sure that the arms are moving when you change the temperature. Thats the only way to know for sure if its working. If its not that their is a few more steps that has to be done before pulling out your dash.
@@AJIMPORTS thanks for your help bro, I have removed the actuator and the arms are definitely moving as the temperature gauge moves, the next thing I was going to attempt was maybe the valve under the hood, if that is also working, then il check the few steps before moving the box in the dash, as you advise, I really appreciate it, there will be millions of people out there who are probably going to find this very useful, and ur the first youtuber who actually replies back, with advice, and steps to Eliminate each issue, so thank you once again
New video is out. That shows additional parts i changed and test to fix no heating issue.
I had a clicking noise so i changed the $200 motor on the left side behind the glove compartment but i removed the drivers side before....and when i use defrost the air comes out of the small vent closest to the drivers door so im thinking i put the drivers side motor back wrong idk
Are all the other moods working correctly?. The motor only goes in one way. Unless you force it in which I'm sure you would know its wrong.
@@AJIMPORTS yes all modes work and i am using an tesla style radio tablet i will check it tomorrow.i dont hear any clicking or knocking sounds
Now you're officially official 😉✌️😎 I been waiting for this video
It's getting cold and I had to fix a few accord with this problem so wanted to share and help
@@AJIMPORTS man I wish you were within driving distance
Si ok