Brymen is much better than UNI-T, but hands down the Japanese designed and manufactured Hioki's are the best around, anyone that knows Electronics knows the Japanese really produce high quality and innovative devices
Well done. Appreciate the huge work you have put into testing them. I have actually watched the entire video. I have just got my DT4261 (with Bluetooth Adapter). I went outside in the sunlight and straight away checked the readability of the display. It was excellent at all angles. The bad part (and they all do it) is the reflections of the high gloss display. My work Fluke 83 didn't have those issues after 25 years of usage as the high gloss was worn off. Surely by now, they could make a matt display by now. Real Users/Electricians/Technicians use their equipment in all kinds of conditions. Even my RF Testset has been used outside in full sunlight to capture interference. They need to stop thinking that we use our equipment indoors only. Otherwise....very pleased with it and I have made the right choice for my next Multimeter.
I have the same 4261. Voltage readings are incredible fast. Ay the begging seems to be disturbing the constant beeping and reading loq resistance and harmful voltages, but at the end you come to realize that’s useful. I have 2 Brymens, those are extremely boring multimeters as well as flukes. I have some flukes and I can say this 4261 has become my favorite one. I will buy a second one. Good review. Greetings from Mexico 🇲🇽
How times change. When I bought a Hioki multimeter as a tech high school student in Turkey some decades ago, it made me look like a looser among other students who chose Fluke. Nowadays Hioki is deemed as good as Fluke...
Well in 70's, 80's, Japanese tech products (ecluding consumer electronics) had the inferior status of Chinese products today. So your school mates were right!
@@n.o.b.1907 Yes the Japanese tech equipment did not command the same prestige as the US ones. But who cares? My Hioki multimeter was more precise than theirs. And I still use that analog multimeter in Turkey today.
Hello from Australia :-). Thanks for your detailed review. I picked up one of these on eBay, I wish it was easier to buy Japanese products, I usually have to buy them in Japan but tool shops usually never have specialised tools like this. If you ever visit Japan, check out the tool shops ;-)
Hioki has some official distributors, who are the only ones for given area. It sure has some advantages and disadvantages, but at least, one can get them the most official way with support etc.
Thank you for the excellent review! Fully agree on your comment over the French engineers. But who really in the right mindset buys French cars nowadays?
Hioki was my first multimeter, back then they had an analog version and I still have it although I have burned some of its internal components while I was trying to measure current. I am planning to get one of their new models and I am will go either with DT4261 (for its bluetooth capabilities) or DT4282. I expect to see more real-time bluetooth enabled multimeters from other vendors also.
I watched another review of dt4261 the reviewer didn't like it because of its low diode mode voltage and slow capacitance reading and because it's also more expensive than most of the midrange meters but after watching your video I realised that they totally missed the point they didn't explore its blutooth function and the related stuff at all it isn't just another ordinary midrange meter it's packed with features that you won't find in some meters twice its price so it matters who is doing the review a very good could be made to appear terrible when it goes into wrong hands
I didnt manage to find any english spoken reviews for DT4261, so it may be one of the other languages I dont understand. Anyway, the bluetooth is something, that adds so many options, one has to cover when reviewing such a multimeter. Exactly as you said, some functions, like FFT, THD and crest are not found even in twice as expensive meters. Review, test, or measurement is always as good as the skill of the person who is performing it. Also, some people don't bother to give it such a long time to explore everything. I personally try to use any instrument I review for at least 14 days and only after then I review it.
Considering Hioki DT4261 Multimeter to complement my Fluke 98 Series II Automotive ScopeMeter among others: - Fluke 787B Process Meter - Fluke 87V MAX Multimeter - Fluke 88V Automotive Multimeter - Fluke 3000 FC Multimeter - Hioki CM4375-50 Clamp Meter
That depends on the respective electronics. One needs a good multimeter and a scope. I would go for DT4282 as it has 3,6-4,4 volts for diode test and adjustable threshold. Review for this piece will arrive before christmas, or in june
@@bekrstechnologiesit's also far more accurate and with better (lower) scales for electronics, especially for current measurements. The DT4261 (as well as the 56) is more of an advanced electrician's DMM well basically it's exactly that, while the 82 is lab oriented.
Hioki was my first multimeter, back then they had an analog version and I still have it although I have burned some of its internal components while I was trying to measure current. I am planning to get one of their new models and I am will go either with DT4261 (for its bluetooth capabilities) or DT4282. I expect to see more real-time bluetooth enabled multimeters from other vendors also.
Thank you for your detailed review of our products and its features! We enjoyed your video!
Thanks for your english videos for international community
Brymen is much better than UNI-T, but hands down the Japanese designed and manufactured Hioki's are the best around, anyone that knows Electronics knows the Japanese really produce high quality and innovative devices
thanks for the review, i couldn't find many for these multimeters!
I own a dt4282, it's similar to dt4261. These hiokis are lightning ⚡ quick on most functions, but people say these are slow on capacitance.
Very nice review, thank you for that. Hioki gives a good feeling
Well done. Appreciate the huge work you have put into testing them. I have actually watched the entire video.
I have just got my DT4261 (with Bluetooth Adapter). I went outside in the sunlight and straight away checked the readability of the display. It was excellent at all angles. The bad part (and they all do it) is the reflections of the high gloss display. My work Fluke 83 didn't have those issues after 25 years of usage as the high gloss was worn off. Surely by now, they could make a matt display by now. Real Users/Electricians/Technicians use their equipment in all kinds of conditions. Even my RF Testset has been used outside in full sunlight to capture interference. They need to stop thinking that we use our equipment indoors only. Otherwise....very pleased with it and I have made the right choice for my next Multimeter.
I have the same 4261.
Voltage readings are incredible fast. Ay the begging seems to be disturbing the constant beeping and reading loq resistance and harmful voltages, but at the end you come to realize that’s useful. I have 2 Brymens, those are extremely boring multimeters as well as flukes. I have some flukes and I can say this 4261 has become my favorite one. I will buy a second one.
Good review. Greetings from Mexico 🇲🇽
How times change. When I bought a Hioki multimeter as a tech high school student in Turkey some decades ago, it made me look like a looser among other students who chose Fluke. Nowadays Hioki is deemed as good as Fluke...
Well in 70's, 80's, Japanese tech products (ecluding consumer electronics) had the inferior status of Chinese products today. So your school mates were right!
By the way, Hioki is not sold in Türkiye anymore. Fluke is still in the market though.
@@n.o.b.1907 Yes the Japanese tech equipment did not command the same prestige as the US ones. But who cares? My Hioki multimeter was more precise than theirs. And I still use that analog multimeter in Turkey today.
@@n.o.b.1907 Right. I have not seen them in the electronics shops etc. Now the market is full of Chinese products and Fluke.
Apparently Hioki does not include a bag in the package, just like decades ago...
This is a weird and annoying move, especially in this price range. They could have atleast included something decently basic if cheap.
Hello from Australia :-). Thanks for your detailed review. I picked up one of these on eBay, I wish it was easier to buy Japanese products, I usually have to buy them in Japan but tool shops usually never have specialised tools like this. If you ever visit Japan, check out the tool shops ;-)
Hioki has some official distributors, who are the only ones for given area. It sure has some advantages and disadvantages, but at least, one can get them the most official way with support etc.
Thanks for making the English version.
Thank you sir
I LOVE the 4261 and use the THD measuring a lot, I bought it specially for that function; I also have the 4282
Thank you for the excellent review! Fully agree on your comment over the French engineers. But who really in the right mindset buys French cars nowadays?
Hioki was my first multimeter, back then they had an analog version and I still have it although I have burned some of its internal components while I was trying to measure current. I am planning to get one of their new models and I am will go either with DT4261 (for its bluetooth capabilities) or DT4282. I expect to see more real-time bluetooth enabled multimeters from other vendors also.
Im not sure why they show maximal value on resistance like 6000MOhm, for me its better to show 2 dashes or OL letters. All others I like
I watched another review of dt4261 the reviewer didn't like it because of its low diode mode voltage and slow capacitance reading and because it's also more expensive than most of the midrange meters but after watching your video I realised that they totally missed the point they didn't explore its blutooth function and the related stuff at all it isn't just another ordinary midrange meter it's packed with features that you won't find in some meters twice its price so it matters who is doing the review a very good could be made to appear terrible when it goes into wrong hands
I didnt manage to find any english spoken reviews for DT4261, so it may be one of the other languages I dont understand. Anyway, the bluetooth is something, that adds so many options, one has to cover when reviewing such a multimeter. Exactly as you said, some functions, like FFT, THD and crest are not found even in twice as expensive meters.
Review, test, or measurement is always as good as the skill of the person who is performing it. Also, some people don't bother to give it such a long time to explore everything. I personally try to use any instrument I review for at least 14 days and only after then I review it.
@@bekrstechnologies It was in Russian. Looking forward to future reviews
nice meters
Fantastic review
Considering Hioki DT4261 Multimeter to complement my Fluke 98 Series II Automotive ScopeMeter among others:
- Fluke 787B Process Meter
- Fluke 87V MAX Multimeter
- Fluke 88V Automotive Multimeter
- Fluke 3000 FC Multimeter
- Hioki CM4375-50 Clamp Meter
The 4256 has two degree no contact voltage detector. Just saying.
Good to know
What Hioki would you recommend for working on consumer electronics?
That depends on the respective electronics. One needs a good multimeter and a scope. I would go for DT4282 as it has 3,6-4,4 volts for diode test and adjustable threshold. Review for this piece will arrive before christmas, or in june
@@bekrstechnologiesit's also far more accurate and with better (lower) scales for electronics, especially for current measurements. The DT4261 (as well as the 56) is more of an advanced electrician's DMM well basically it's exactly that, while the 82 is lab oriented.
It’s pronounced Heee Ohkee
hello Sir. Is 4261 display clearer than 4256? Thanks.
I don't know, I don't have the DT4256 available since I returned it. But I have never had problems with Hioki displays whatsoever.
@@bekrstechnologies thanks!
It will take another 20 years for Hioki to make something better than Fluke 87 from early 90..
It already has, DT4282, much better multimeter, and compared to fluke, it's not filled with bugs and problems
No rms no deal
What do you mean? They are both True RMS multimeters...
Hioki was my first multimeter, back then they had an analog version and I still have it although I have burned some of its internal components while I was trying to measure current. I am planning to get one of their new models and I am will go either with DT4261 (for its bluetooth capabilities) or DT4282. I expect to see more real-time bluetooth enabled multimeters from other vendors also.