Put a huge smile on my face to see a girl so young teaching 3D printing/engineering. This kind of self-confidence and skills early in life will do more for you than you can possibly imagine. 💙🎉Congrats! Keep helping others and finding things you enjoy to work on and you'll go far.
WOW! What an articulate young lady. Viewed your three videos and I have to say that you and your brother are doing an excellent job with the recording and editing. I’m just getting ready to get into 3d printing and I found your videos both entertaining and instructional. Keep up the good work and I can’t wait for your next video
Such as a smart and gived young lady. You providing me in depth knowledge of 3D printing. I can assured you. You will be a future professional engineer going down the track. Your presentation and in-depth Illustration are excellent. Good on you.
You're an amazing young lady...extremely intelligent, informative, and confident in your presentations. You and your brother produce incredible videos! 👏
I often watch RUclips videos about printers and printing. I often fall asleep halfway through or earlier. Not so with your videos, to the point and very informative. It shows that your knowledge is very solid and you bring it over very well. I love your videos, I want more. So detailed and well explained. In my book, this is a direct drive extruder system with a not-so-full metal hot end. It prints well and makes filament change very easy. I added a $ 6 full metal extruder just because I had one.
This video really helped me quite a lot, thank you so much! Really good explained and with good graphics, easy to understand! This is how tutorials should look, 10 of 10 points! ^^
I like your tutorials, thank you so much, please a word of warning, never hold the object to be drilled in your hand, use a bench vice, if the object catches on the bit, it will spin resulting in severe lacerations and possibly cutting of tendons in your hand. I have witnessed the damage myself and attended the ER.
Aurora tutorials are the most comprehensive and simplest to follow. You helped me thru Ender 5 starting setup and some upgrades. Have you taken a look at the OMG v2-s dual gear extruder? I think it would be great on Ender 5. Btw behind the scene is fun and natural. Thank you for the tutorials.
Thanks for sharing Aurora, I would like to know if the ender 3 direct drive extruder kit is compatible and possible to install into a 3d printer Two Trees Bluer plus, you know say me?
The bluer plus direct drive conversion requires much more works, I would suggest replacing the stock bowden tube to a SHORTER Capricorn tube to improve retractions.
not really a direct drive extruder. This is more of a super short bowden tube.. Warping of the tube or trying to use PTFE will be difficult without melting it.
Yes, you are right, a super short bowden tube almost direct extruder, just like those from Creality and Micro-Swiss, they are all with a short bowden tube.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
I have never heard any tutorial that had clear instructions with clear words like yours
Put a huge smile on my face to see a girl so young teaching 3D printing/engineering. This kind of self-confidence and skills early in life will do more for you than you can possibly imagine. 💙🎉Congrats! Keep helping others and finding things you enjoy to work on and you'll go far.
Aurora is 27 years old.
@@wavyseahill no, she's not... she's 14
@@peteregg4304 😅
WOW! What an articulate young lady. Viewed your three videos and I have to say that you and your brother are doing an excellent job with the recording and editing. I’m just getting ready to get into 3d printing and I found your videos both entertaining and instructional.
Keep up the good work and I can’t wait for your next video
Glad it was helpful, thank you!
剪接非常好👍🏻👍🏻
@@mai-fa you think so? I thought it was Fan-Tas-Tic
Such as a smart and gived young lady. You providing me in depth knowledge of 3D printing. I can assured you. You will be a future professional engineer going down the track. Your presentation and in-depth Illustration are excellent. Good on you.
One of the best DIY 3d printing videos I have ever seen. Clear and concise, no filler or messing around. Excellent!
Your tutorials are quick, simple and brilliant. I love this!
You're an amazing young lady...extremely intelligent, informative, and confident in your presentations. You and your brother produce incredible videos! 👏
I often watch RUclips videos about printers and printing. I often fall asleep halfway through or earlier. Not so with your videos, to the point and very informative. It shows that your knowledge is very solid and you bring it over very well. I love your videos, I want more. So detailed and well explained. In my book, this is a direct drive extruder system with a not-so-full metal hot end. It prints well and makes filament change very easy. I added a $ 6 full metal extruder just because I had one.
I am really impressed by the quality of your videos. Clear, factual, evidence based and to the point. Great work.
Better explained than most videos out there. keep it up this is really good and easy to follow.
So pleased I found your channel. Beautifully presented videos with clear diction and explanations.
This video really helped me quite a lot, thank you so much!
Really good explained and with good graphics, easy to understand! This is how tutorials should look, 10 of 10 points! ^^
for her age she speaks like a pro
You are the best !!!!! your tutorials really break things down. Great work!!!!!
AMAZING, the amount of knowledge is impresive!
the voice explanation is so professional.
Absolutely the most informative video I've seen. Thank you, keep it up.
Impressed. Hope to see more from this young lady
I like your tutorials, thank you so much, please a word of warning, never hold the object to be drilled in your hand, use a bench vice, if the object catches on the bit, it will spin resulting in severe lacerations and possibly cutting of tendons in your hand. I have witnessed the damage myself and attended the ER.
Aurora tutorials are the most comprehensive and simplest to follow. You helped me thru Ender 5 starting setup and some upgrades. Have you taken a look at the OMG v2-s dual gear extruder? I think it would be great on Ender 5. Btw behind the scene is fun and natural. Thank you for the tutorials.
Thank you very much for choosing our OMG extruder upgrade!
your bro is so lucky to have a sibling like you!
Really great video and enjoyed the ending footage :) The knowledge about the extra weight of dual drive was very helpful!
Impressive work young lady :)
I modded my ender 3 pro. Great mod, had to diy a longer cable tho. Gantry balanced with 1 motor.
Amazing, articulate and well informed tutorial. keep it up!
Go for it...Girl, you're amazing!
This is a really great tutorial. Thanks for making it.
God Tier Presentation
awesome bloopers at the end! ))
Really great video! I've been considering this for my V2
Great video! Helps out alot!
You explain really Good. Nice video quality.
Glad you liked it!
She is very good and very adorable!
Fantastic video 👍
I love this videos thanks for sharing
can i use it on my creality cr-6 se?
Thank you! This is great.
Hi. I did that upgrade on my Ender 3 pro. What cura profile do you recommend or use to print in PLA with .4 nozzle?
Cartilage... haha! It`s cartridge dear :) Great presentation and wonderfully articulated aswell. Keep up the good work!
Thank you for teaching me aurora
Thanks for telling me that direct drive will ruin my ender3v2 printer (without adding double z rods). *You are very cute little girl.*
Anyone have a Link for cable extension? Please
Very useful . Thanx for all the Information ! :D
very nice video, thnak you
Thank you
Thanks for sharing Aurora, I would like to know if the ender 3 direct drive extruder kit is compatible and possible to install into a 3d printer Two Trees Bluer plus, you know say me?
The bluer plus direct drive conversion requires much more works, I would suggest replacing the stock bowden tube to a SHORTER Capricorn tube to improve retractions.
thanks for the video! learning from you :) xoxo!
great video thank you
DirectDrive will not work for CR10S Pro V2 :(
I have a direct extruder upgrade on the CR-10S Pro v2 2 years ago, search for OMG extruder and you will see my video.
@@AuroraTech Thanks, on it !!!
People underestimate what kids can accomplish.
i love you
not really a direct drive extruder. This is more of a super short bowden tube.. Warping of the tube or trying to use PTFE will be difficult without melting it.
Yes, you are right, a super short bowden tube almost direct extruder, just like those from Creality and Micro-Swiss, they are all with a short bowden tube.
Any benefits of the true direct drive extruder (brands ?) over the "short bowden tube" "almost direct extruders" ?@@AuroraTech
bowden tubes are a scam. pure trash. i've got both types of extruders... i've had NOTHING but trouble with bowden tubes. ridiculous design.