I'm loving my Sprinter in my small garage. More than enough height for anything detailing, and just enough room to roll underneath on a creeper seat. Someday when I move into a place with a large garage/shop...I'll get a two post Nussbaum to compliment it for the big car repair jobs.
You need to put a mirror on the wall in front of your lift so you can see exactly where your tires are as you drive onto it. That would keep you centered and eliminate the guess work.
I sure wish you could have kept Twin Busch as your entry level lift, but I understood your troubles with pricing. It’s a huge step up in price for this lift, although I am sure it’s better.
Quality remains long after the price is forgotten. I'm selling my 2 post Nussbaum and getting the scissor. I get your nervousness. I lift a 3 ton 4 wd and it's slow to go up and I get nervous all that height hanging there. I just saw the 2 pack hoist and boy is that slow 1 and a half minutes for a small car. But I'll be mounting it level. I also have a 18 foot hovercraft so the scissor will be ideal.
This lift has no mechanical safety mechanism? As some who worked professionally as an auto mechanic, I'd have a hard time standing under a lift that doesn't have mechanical safety stops.
I’m assuming those cap nuts are attached to a threaded post or stud. If you were to cut down that stud you could use a female to female threaded hex and attach from the outside a countersink screw which would leave the surface flat.
Any high rise scissor lift available between this and the twin busch as far as price? I know you said twin Busch is the Kia and this Nussbaum is a Porsche, so which one is the BMW ? :P
Will be in Destin maybe I should go down and get an up close look. I need to pickup more items for the giveaway anyway. I want to have the baddest 2 1/2 garage in the country.
@@smack9x LOL yeah we know Matt. We had an alignment rack that you needed to be placed on pretty close to perfect. Having a mirror in front and tilted down slightly made the job easy especially if you were by yourself. It takes a little time to position the mirror just right but then it's cake
You mentioned the prices for all the extra add ons like it’s nothing to us. Like it’s just water. Don’t forget a lot of your viewers aren’t filthy rich like yourself so be mindful of that. On top of that $600 for it to get powder coated. It can get done for 1/3 of that price. $500 for a couple of steel plate extensions. I’m a sheet metal fabricator/welder and I know the true cost of what goes into building those dinky things. $100 maximum and y’all trying to overcharge. I wouldn’t support a company like this.
You’re telling us that you would make a set of FOUR of those ramps for 100 bucks. Besides the material and finishing costing more than that, is your labor worth nothing? Do you fabricate stuff for other people for free? 500 for that set of 4 ramps all nice and finished sounds perfectly reasonable to me.
I'm loving my Sprinter in my small garage. More than enough height for anything detailing, and just enough room to roll underneath on a creeper seat. Someday when I move into a place with a large garage/shop...I'll get a two post Nussbaum to compliment it for the big car repair jobs.
Matt, I love the design and the height...absolutely perfect!
The only drawback as compared to a 4-post drive on is being able to park a car underneath, but not sure I will need to in the new garage.
Wow man those wheels and the ride height look so darn good! 16” wheels are the perfect size for the 90’s Civics and Integras.
A lift would make things so much easier in my life.
I have been waiting for these updates all day lol
For the car of course lol ...
awesome. super inspirational. I hope to get this lift, or one like it, at some point in the future!
thanks for explaining this. can't wait to order.
I would love to see how your white raptor fits on that lift and I work manly on trucks.
You need to put a mirror on the wall in front of your lift so you can see exactly where your tires are as you drive onto it. That would keep you centered and eliminate the guess work.
Man that civic is looking sooooo good lol.
Yea, what's a Nussbaum? I was stuck on drool.
20:19 that cut though
I sure wish you could have kept Twin Busch as your entry level lift, but I understood your troubles with pricing. It’s a huge step up in price for this lift, although I am sure it’s better.
Quality remains long after the price is forgotten. I'm selling my 2 post Nussbaum and getting the scissor. I get your nervousness. I lift a 3 ton 4 wd and it's slow to go up and I get nervous all that height hanging there. I just saw the 2 pack hoist and boy is that slow 1 and a half minutes for a small car. But I'll be mounting it level. I also have a 18 foot hovercraft so the scissor will be ideal.
This lift has no mechanical safety mechanism? As some who worked professionally as an auto mechanic, I'd have a hard time standing under a lift that doesn't have mechanical safety stops.
The wet everyday weight of an F350 class truck is a little over 9000 lbs. Is there an extra heavy duty that has > 9K capacity?
A vehicle lift is the one tool I wish I had, every day. Sadly, my garage doesn't have the height
When is the Milwaukee going to continue
This car looks amazing 🔥🔥
I’m assuming those cap nuts are attached to a threaded post or stud. If you were to cut down that stud you could use a female to female threaded hex and attach from the outside a countersink screw which would leave the surface flat.
beautiful shop!
Awesome 🔥🔥🔥
Awesome this is from the plant i work at
Looks great
Any high rise scissor lift available between this and the twin busch as far as price? I know you said twin Busch is the Kia and this Nussbaum is a Porsche, so which one is the BMW ? :P
Will be in Destin maybe I should go down and get an up close look. I need to pickup more items for the giveaway anyway. I want to have the baddest 2 1/2 garage in the country.
How much for extension ramps?
Awesome
If you have the space put a mirror in front of the lift so you can center the car yourself
He will have to make a wash and talk for the mirror 😎
@@smack9x LOL yeah we know Matt. We had an alignment rack that you needed to be placed on pretty close to perfect. Having a mirror in front and tilted down slightly made the job easy especially if you were by yourself. It takes a little time to position the mirror just right but then it's cake
i came for the blue si
Why not stainless steel hose channel?
Will that lift a 1500 gmc crew cab ?
You’d want the Jumbo 9.
Hi! Buy another s2000 and make a Great car again! I remember your ex s2000.
I need 1 of this lift where to purchase 1? Thanks
www.obsessedgarage.com/products/nussbaum-jumbo-hf-7
Stop being a baby. Go all the way up. They engineered the damn thing properly for dumb techs
Floor under the lift is janky 😮🤐
Maybe paint it the color of the Swisstrax to not stand out?
Saw some turtle wax... 🧐
He’s about to do a huge test of all the graphene and SiO2 spray products on the market, sort of like the pressure washer series.
@@Patrick94GSR won’t be disappointed in turtle wax, I mean for the price it’s crazy what it does
You mentioned the prices for all the extra add ons like it’s nothing to us. Like it’s just water. Don’t forget a lot of your viewers aren’t filthy rich like yourself so be mindful of that. On top of that $600 for it to get powder coated. It can get done for 1/3 of that price. $500 for a couple of steel plate extensions. I’m a sheet metal fabricator/welder and I know the true cost of what goes into building those dinky things. $100 maximum and y’all trying to overcharge. I wouldn’t support a company like this.
You’re telling us that you would make a set of FOUR of those ramps for 100 bucks. Besides the material and finishing costing more than that, is your labor worth nothing? Do you fabricate stuff for other people for free? 500 for that set of 4 ramps all nice and finished sounds perfectly reasonable to me.
Getting famous off comments day 205, so I can live the dream, live everyday like it’s your last day🤙
can it be configured for 110v. sound like no
Not this one.
@@ObsessedGarage thank you