How to Replace Engine Mounts 1997-2006 Jeep Wrangler

Buy Now!
New Engine Mount from 1AAuto.com trq.video/ia-1...
This video shows you how to install a new engine mount on your 1997-2006 Jeep Wrangler. A shaking or vibrating engine, or bucking when changing gears are signs of worn engine mounts.
This repair was done on a 1997 Jeep Wrangler Sport 4.0L Sport Utility 2-Door 4WD Manual and the process should be similar on the following vehicles:
1997 Jeep Wrangler
1998 Jeep Wrangler
1999 Jeep Wrangler
2000 Jeep Wrangler
2001 Jeep Wrangler
2002 Jeep Wrangler
2003 Jeep Wrangler
2004 Jeep Wrangler
2005 Jeep Wrangler
2006 Jeep Wrangler
Tools you will need:
• Pry Bar trq.video/oW8-...
• 15mm Socket trq.video/obDJ...
• 18mm Socket
• Air Chisel
• Ratchet trq.video/obHK...
• Socket Extensions trq.video/obDJ...
• Torque Wrench trq.video/oaLL...
• Block of Wood
• Gloves trq.video/oamf...
• Safety Glasses
• Floor Jack trq.video/oaa7...
• Hammer
• Jack Stands trq.video/oYa-...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Jeep Wrangler 2nd Generation 1997-2006: • Jeep Wrangler 2nd Gene...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@andyschneider8221]

great video - I just changed the passenger side on my '97 Wrangler, your video was most helpful!

[@yarddog6082]

Excellent video

[@JuliaLee-kc5zk]

Is this on the 4.0? I have the 2.5 and that bolt runs right into the alternator.

[@Michael-jp4oh]

now i see why you showed the passenger side. The driver side is much harder. The compressor is in the way of the bolt.

[@nerminc.1713]

You only did one side. Now show the driver side with the bolt that pulls out toward the AC compressor