Hello Henry ive done this method with my l1800 and then are cleared or at least they all spray out clean from the print head but whenni reinstall and run head cleanings i get a few lines of white and black but nothing else...why if it flushed clean
Hi Henry, I follow the steps in your video flushing all the inks from the print head and put it all back. But now when I on my printer, it will start doing head cleaning then end with two simultaneous blinking lights on the ink symbol and paper symbol. On and off printer few times also the same and printer cannot print... Checked in Google and few youtube videos from others, they said the rod is dirty and need to be cleaned. I cleaned the rod and still the same. I am stuck now... Can you advise on what might have gone wrong?
Hi sir, I have a Epson L1800 pigment ink is install, I wanted to convert to dtf, can I used the same ink for CMYK that is still in the tank and just buy the white for dtf or replace all the inks?
I have no idea anymore. Do we have a printer L1800 professional here? Printhead New 100% Function! Tested in the other machine Dumper New! All hoses tested and flushed Acro Rip reinstalled Why does my L1800 printer not print white? or it prints after initial print head filling very briefly beautiful white and then stops! It worked great for 1 year 🙁
i am using my L1800 epson ptinter since 7 years .Nowadays i am not satisfying in print quality may be it needs head cleaning and i am afraid of damaging printer while i can do it.
My blue ink is the only color that gone. I did first cleaning like what you have showed, and it was fixed. Unfortunately, the color next to it, red that never a problem before is missing. I tried clean, head cleaning still the same. So i have done second cleaning, for all colors but now both blue colors gone. I really lose hope with this printer 😩
I face this problem before. Then i change damper the problem solved. Anyway i try many suppliers of dampers. It look a same but the quality are vary. Jusr share my experience
Hello Mr. Henry! I have a Epson L1800 and it worked fine for the first month..now everyday when I'll do the daily maintenance, the white ink dampers are darker as if they're getting mixed with other colors.. do you know what may be causing this? It prints perfectly, just the white ink seems to be getting mixed.
Personally i try more than 5 suppliers of dampers when i face thia problems. From there i learn that all look a same. But the quality and performance may varies. Change print head is the last option because it is too costly.
Hello Henry. I have a L1800 printer and no matter what I did I couldn't unclog the magenta color. I don't think the problem is caused by the clogged head anymore. Because when I clean with software, sometimes 10 pores are clogged, sometimes 5 pores. When I clean it many times, magenta opens, I get 5-10 prints, but then it gets clogged again. Could this problem still be caused by the clogged head? Or could it be another problem? By the way, I usually do the head wash with isopropyl alcohol. Thanks in advance for your help.
I just purchased a L1800 last week. I couldn't get it to print white. I did the manual head cleaning like you suggested. It worked for 1 print. It was perfect. However, now I cannot get any white to print at all again. I did the manual head cleaning again, and it printed some white but not a lot. Do you have any suggestions?
Below is my practice to keep the printer healthy. 1) Daily Maintenance ( Please watch the video inside playlist ) 2) Only perform manual head cleaning when method 1 can not solve the problem. We must have correct mindset in this printing industry as below : NOT all DTF supplies ( Ink, Pet Film & Powder ) are the same. The only same is their physical foam. There are plenty of grade quality at market.
Hi Mr Henry, I've tried flushing cleaning solution through the nozzle but instead of it coming out from the print head, the cleaning solution came out from the other nozzle, is it normal?
Hi Mr Henry, I couldn't get my white to print. I tried the auto head cleaning for about 4 times and it works for a few prints (5 prints) The next day, the same problem happens again. I tried your step by step manual head clean but it still doesnt work. Now the black and white colour doesnt appear. Please help!
@@HenryTeoh I tried that, however I find it harder to extract the ink as compared to when I got the printer. The ink doesn’t seem to flow into the syringe
@@alvinglee8086 afraid ink clog inside the tiub. Remember this term. NOT all DTF supplies ( Ink, Pet Film and powder ) are the same. The only same is their physical foam.. Like all cars function are the same but got plenty of quality range.
@@HenryTeoh do you have any recommendations for ink and PET film? I’ve been pushing back my orders due to this issue ); currently, is there anything I can do to unclog the tube?
Change damper is first option. I didn't try ultrasonic method until now. Help below quotes may help you : Not all dtf supplies ( Ink, Pet Film & Powder ) are the same. The only same is their physical foam. 😅
Just wanted to know if you give me some advice my printer is printing lines in white did headed cleaning with solution and they they are not clogged the white is not coming out smooth
When this happens to me, I will check the healthy of the damper. Damper is a consumable part for the printer. My printer nearly 2 years old and each color damper already change 2 or 3 time but print head still good.
@@HenryTeoh What Stephanie is trying to convey is that she would appreciate it if you could demonstrate how to change the damper clip, since she was a newbie and clueless.
@@stephaniesoo4640 Check out this video; he demonstrated how to change the damper. Simply skip to 2:00 in the video. ruclips.net/video/gArkXJLWc90/видео.html
I cleaned my print head and refitted and now I can't power the printer, it is not turning on. I am wondering if I damaged the power board when I removed the power cable to move the print head into the centre.
@@HenryTeoh I read on FB that a guy had similar issue when the cable was attached to the print head so I took the cable out and the power came back on. I think it was in at the wrong angle as I now have power but the head is still not printing. I used a standard print head ink cleaning kit off eBay, do I need to use a special DtF kit instead? Going to try and give it a go in the ultrasonic cleaning machine I ordered.
This printer is a disaster. I spent 6hrs cleaning nozzle, flushed damper, shake the ink tanks, cleaned the print head and it still doesnt print white perfectly. Mine is only 2 month old and its trash.
I can understand your pain where I go through before. What I can share with you is Not all DTF supplies ( Pet Film, Ink & Powder) are the same. The only same are their physical foam. In the market there are plenty of grade quality suppliers. Explore it.
Mine is less than a month old. Still using the ink that come with package deal I ordered. Now the white will not print at all. Have flushed the lines and cleaned the heads so many times and still can’t fix it. Any suggestions?
Hello Buddy I follow what do you say and my printer didn’t go on I change motherboard now when I turn it on I get fatal error 20000107 Can you help me please
Hello sir I have problem with my epson l1800 after I try to clean the head printer i turn it on then it does auto head clean, no ink coming out after that two light start blinking could you help me
Hello sir... I have done exactly what u show in this video and fitted again.. but my printer doesn't print anything... It act like printing but there is no output there. Can u solve this?
![Twenty One Pilots - The Line (from Arcane Season 2) [Official Audio]](http://i.ytimg.com/vi/XCz7WUotXs8/mqdefault.jpg)
wow amazing! very clearly tutorial for cleaning.. Thank You Mr. henry Teoh! i'm from Philippines 🥰
wow... betul2 step by step proses !👍🏻
This is exactly what I was looking for! Super helpful thank you!
You are welcome. Share out this channel to benefit more beginner users.
wishing you Happy New Year 2024!! Thanks
For whoever does this method I DO RECOMMEND to unplug the cables from the printhead before you flush it. Trust me on this !
Anyone who says "Trust me" with no explanation on why to trust what they say seems a lil sketchy
@@DjVerasMusic or you can go the hard way and burn the printhead's motherboard. Nothing sketchy here, only your thoughts.
It's quite logical actually.
Make all sense...
HI HENRY, BLH U SHARE MCM MANA NK SOLVE ISSUE WHITE INK XNAK KLUAR TAK, HEAD X SUMBAT, SUDAH CEK, TP BILE PRINT WHITE INK XNK KLUAR , MODELL1800 DTF
Ink tak keluar ada banyak... damper, ink quality dan terakhir print head
Thank You!
Hello Henry ive done this method with my l1800 and then are cleared or at least they all spray out clean from the print head but whenni reinstall and run head cleanings i get a few lines of white and black but nothing else...why if it flushed clean
Hello good day when I print the white print small an cut , please what could be the problem
Hi Henry, I follow the steps in your video flushing all the inks from the print head and put it all back.
But now when I on my printer, it will start doing head cleaning then end with two simultaneous blinking lights on the ink symbol and paper symbol.
On and off printer few times also the same and printer cannot print...
Checked in Google and few youtube videos from others, they said the rod is dirty and need to be cleaned.
I cleaned the rod and still the same.
I am stuck now...
Can you advise on what might have gone wrong?
Look like the waste ink counter indicates full. Get Epson Adjustment Program to reset the counter
You blew a fuse on the motherboard, prob got the circuit wet
Yes. This may one of the reasons
is it okay to completely remove the foam from the dock? so white wont mix whit cmyk sometimes?
Mr Henry I have a procolored A3 DTF printer can I order a print head from another company L1800 is the one I have. Are all the print heads made alike
Hi sir, I have a Epson L1800 pigment ink is install, I wanted to convert to dtf, can I used the same ink for CMYK that is still in the tank and just buy the white for dtf or replace all the inks?
Can not. It is different type of Pigment Ink.
I have no idea anymore. Do we have a printer L1800 professional here?
Printhead New 100% Function! Tested in the other machine
Dumper New!
All hoses tested and flushed
Acro Rip reinstalled
Why does my L1800 printer not print white?
or it prints after initial print head filling
very briefly beautiful white and then stops!
It worked great for 1 year 🙁
Does the white printed during nozzle check?
Hi,syringe method doesn't work anymore for me,white chanels are heavy blocked,is there any solutions?
i am using my L1800 epson ptinter since 7 years .Nowadays i am not satisfying in print quality may be it needs head cleaning and i am afraid of damaging printer while i can do it.
Epson l805 head recovers video upload please ❤❤
My blue ink is the only color that gone. I did first cleaning like what you have showed, and it was fixed. Unfortunately, the color next to it, red that never a problem before is missing. I tried clean, head cleaning still the same. So i have done second cleaning, for all colors but now both blue colors gone. I really lose hope with this printer 😩
I face this problem before. Then i change damper the problem solved.
Anyway i try many suppliers of dampers. It look a same but the quality are vary.
Jusr share my experience
@@HenryTeoh ohh definitely gonna try it. Thank you for sharing 🙏
Hello Mr. Henry! I have a Epson L1800 and it worked fine for the first month..now everyday when I'll do the daily maintenance, the white ink dampers are darker as if they're getting mixed with other colors.. do you know what may be causing this? It prints perfectly, just the white ink seems to be getting mixed.
Change new damper
@@HenryTeoh I did that, didn’t work at all
@@HenryTeoh Do you think I should replace the head?
Personally i try more than 5 suppliers of dampers when i face thia problems. From there i learn that all look a same. But the quality and performance may varies.
Change print head is the last option because it is too costly.
@@HenryTeoh I’ll try that. Thank you!!
After I do the manual flushing my printer wont turn on. What to do?
How often should it be cleaned? On average we do 50 prints every 2 weeks
Usually i just do the maintenance before i start that day of printing job
What kind of cloth do you use to wipe
Usually I use tissue paper.
Please can you list out the items of what you used in cleaning the printer head
Cleaning liquid in turquoise colour. Not the transparent. Get it from ink supplier
Thank you so much.
Hello Henry. I have a L1800 printer and no matter what I did I couldn't unclog the magenta color. I don't think the problem is caused by the clogged head anymore. Because when I clean with software, sometimes 10 pores are clogged, sometimes 5 pores. When I clean it many times, magenta opens, I get 5-10 prints, but then it gets clogged again. Could this problem still be caused by the clogged head? Or could it be another problem? By the way, I usually do the head wash with isopropyl alcohol. Thanks in advance for your help.
Damper is consumable part. Try to get a new damper
@@HenryTeoh I'll get one. Thanx.
I cannot find this tube anywhere :(
@Henry Teoh cleaning use liquid name please?
What if there is no continious water coming out from printer head just water drops
It mean print head clog
Can u give tips and advise how to remove print head clog?
Inside the video is the method how i clean the print head clog
I just purchased a L1800 last week. I couldn't get it to print white. I did the manual head cleaning like you suggested. It worked for 1 print. It was perfect. However, now I cannot get any white to print at all again. I did the manual head cleaning again, and it printed some white but not a lot. Do you have any suggestions?
Below is my practice to keep the printer healthy.
1) Daily Maintenance ( Please watch the video inside playlist )
2) Only perform manual head cleaning when method 1 can not solve the problem.
We must have correct mindset in this printing industry as below : NOT all DTF supplies ( Ink, Pet Film & Powder ) are the same. The only same is their physical foam. There are plenty of grade quality at market.
shake white tank. maybe it dried up. white dries fast
Hi Mr Henry, I've tried flushing cleaning solution through the nozzle but instead of it coming out from the print head, the cleaning solution came out from the other nozzle, is it normal?
Это разгерметизация головки выкиньте его
tq 👍
Why my Epson L1800 printer print out nothing. Is it something wrong with Acrorip software?
Do nozzle check print. If everything is fine, mean setting at Acrorip got problems. But if the nozzle pattern are not complete, it mean head clog.
@@HenryTeoh I have done the printer head cleaning with your instruction and check the print settings but nothing comes out.😱
You mean nozzle check nothing print out?
@@HenryTeoh Sent for actual artwork at first printed out one perfect sheet but subsequently nothing print out it’s blank.
@@HenryTeoh I meant the actual print out on the film.
Hi Mr Henry, I couldn't get my white to print. I tried the auto head cleaning for about 4 times and it works for a few prints (5 prints) The next day, the same problem happens again. I tried your step by step manual head clean but it still doesnt work. Now the black and white colour doesnt appear. Please help!
Firstly you must perform the syringe maintenance method then do this manual deep maintenance
@@HenryTeoh I tried that, however I find it harder to extract the ink as compared to when I got the printer. The ink doesn’t seem to flow into the syringe
@@alvinglee8086 afraid ink clog inside the tiub. Remember this term.
NOT all DTF supplies ( Ink, Pet Film and powder ) are the same. The only same is their physical foam..
Like all cars function are the same but got plenty of quality range.
@@HenryTeoh do you have any recommendations for ink and PET film? I’ve been pushing back my orders due to this issue ); currently, is there anything I can do to unclog the tube?
@@alvinglee8086 sounds like you need to replace the damper, many (milky) white issues are related to faulty dampers
Great..👍🏻👍🏻👍🏻
hi mr henry, what is the time schedule to do this cleaning maintenance again?
When syringe maintenance can not solve the clog issue.
Tu
Thank you Sir for the tutorial ✌😎
How often you do this maintenance?
When daily maintenance can not solve my problem then only i do manual maintenance
IT IS HARD TO GET THE DAMPER HOLDER OFF
HI HENRRY i DID ALL BUT MY PRINTER DOESNT PRINT ANITHING NOW,,
The video is one of the reasons. May be the printer motherboard issue.
I am having a hard time removing the damper holder lock from the back
Yes. It is hard for first few time.
Hi i have a uv printer Epson 1390 its do just megenda and white colour only so what's problem
Possible the others color having clogging issues
Hi again I have Epson 1800 CMYK ink nozzles are open but white is not opening how can I fix it?
Damper can cause this problem too.
@@HenryTeoh can ultrasonic fix printhead or it will damage it?
Change damper is first option. I didn't try ultrasonic method until now.
Help below quotes may help you :
Not all dtf supplies ( Ink, Pet Film & Powder ) are the same. The only same is their physical foam. 😅
I seldom face problem using my dtf supplies even have, it is easy to solve it.
@@HenryTeoh can you suggest where to buy high-quality ink and dampers from suppliers recently I changed 3 heads😔 I'm giving up on my Epson 1800...
Just wanted to know if you give me some advice my printer is printing lines in white did headed cleaning with solution and they they are not clogged the white is not coming out smooth
Try refer to my another video about using syringe to do maintenance before start the day of printing job.
@@HenryTeoh hello I’ve done that that every time I print and it prints fine half way thru print every time I’ve even clean lines
When this happens to me, I will check the healthy of the damper. Damper is a consumable part for the printer.
My printer nearly 2 years old and each color damper already change 2 or 3 time but print head still good.
@@HenryTeoh I did put 2 new dampers for the white and still have lines only had this machine 3 months thanks for the help
Hello Henry,
Can you make a video on how to replace ink damper ?
My ink damper ink is broken 😫
Just the ink tiub from old damper and replace a new once😂
@@HenryTeoh I am a newbie and just got my printer last week already broke the ink damper clip 😅
worry to break anything further.
Thanks
Just replace a new one
@@HenryTeoh What Stephanie is trying to convey is that she would appreciate it if you could demonstrate how to change the damper clip, since she was a newbie and clueless.
@@stephaniesoo4640 Check out this video; he demonstrated how to change the damper. Simply skip to 2:00 in the video. ruclips.net/video/gArkXJLWc90/видео.html
I cleaned my print head and refitted and now I can't power the printer, it is not turning on. I am wondering if I damaged the power board when I removed the power cable to move the print head into the centre.
As mention inside the video, when doing the flush must be careful. Don't let the liquid wet the print head mother board.
@@HenryTeoh I read on FB that a guy had similar issue when the cable was attached to the print head so I took the cable out and the power came back on. I think it was in at the wrong angle as I now have power but the head is still not printing. I used a standard print head ink cleaning kit off eBay, do I need to use a special DtF kit instead? Going to try and give it a go in the ultrasonic cleaning machine I ordered.
Usually the liquid I use is in turquoise color. If the liquid is a transparent color is for wet the print head will not using.
Can I use spirits as cleaning solution?
What should I do for preventing clog of print head?
Wet capping.
@@HenryTeoh Do we need to wet capping everyday sir?
Myself don't practice this method. I just perform the daily syringe maintenance.
This printer is a disaster. I spent 6hrs cleaning nozzle, flushed damper, shake the ink tanks, cleaned the print head and it still doesnt print white perfectly. Mine is only 2 month old and its trash.
I can understand your pain where I go through before.
What I can share with you is Not all DTF supplies ( Pet Film, Ink & Powder) are the same. The only same are their physical foam.
In the market there are plenty of grade quality suppliers. Explore it.
@@HenryTeoh same here very frustrating less than a month still one of the white is not working
My printer has only worked right ONE time. I keep doing the things suggested and I’m getting nowhere.
Do you try get help from your supplier?
Mine is less than a month old. Still using the ink that come with package deal I ordered. Now the white will not print at all. Have flushed the lines and cleaned the heads so many times and still can’t fix it. Any suggestions?
Where do you buy the colordumpers?
Ali Express
Hello Buddy I follow what do you say and my printer didn’t go on I change motherboard now when I turn it on I get fatal error 20000107
Can you help me please
Bro... Until today i didn't cross by this problem. So don't have solutions can share.
My L1800 doesnt have the Wiper next to the ink station. Is this normal?
Sure have. Need to use tool to flip it up
Hello, can I retrofit a used l1800 printer into a dtf printer?
Make sure clean up all old ink and change new damper.
@@HenryTeoh thank you
Thank you bro..
Can I use that for my 1390 printer sir
Can.
@@HenryTeoh thanks sir 🙏🙏
Do you let the head dry?
No
how long your printhead last?
My printer print more then 2k, still functional well
i can't find hex key past the carriage
When first time I am doing this action, I took me nearly 20mins😂. You may search other video method at RUclips.
cleaning use liquid name please?
Sorry. I don't have. Because i get it from the ink supplier
Hello sir
I have problem with my epson l1800 after I try to clean the head printer i turn it on then it does auto head clean, no ink coming out after that two light start blinking could you help me
When I face this problem, firstly I will check my waste ink tank counter.
If it is full, then get Epson Adjustment Program to reset it
@@HenryTeoh thanks man I will try
Hello sir... I have done exactly what u show in this video and fitted again.. but my printer doesn't print anything... It act like printing but there is no output there.
Can u solve this?
I only share the problem I am facing and the solution I take.
There are still many factors can cause this problem
did you remove the white cables? That happened to me because it was not put back into the motherboard straight.
Ужас какой !
чистить головку не отсоединяя ее - это как умываться лежа в постеои🤣
Так могут делать только начинающие .
Да это правда
not satisfy wrost experions no epson printer rs 8730 head no warranty vcare service and head office not answer ahmedabad Gujarat india
thank you so much