AUDI TT MK3 or MK7 Golf GTi How to install an APR Carbon Intake, Pipe & Turbo Elbow

Поделиться
HTML-код
  • Опубликовано: 18 окт 2024

Комментарии • 38

  • @pauljoel4514
    @pauljoel4514 2 года назад +3

    I can't believe the luck that you have in sourcing bits for the car, I have been looking for ages and cant get a rear spoiler of any quality or the carbon interior handles/consul trims. Vids are great, thanks you really take time to show what you're doing unlike some who just skip the detail and show before/after. Keep the content coming 🙂

    • @ITSARAPPTTRS
      @ITSARAPPTTRS  2 года назад

      Thank you so much for your message. I appreciate these messages so much and this is what keeps me going! It helps that I have a large instagram following so parts are easier to source but it is very hard, especially the wing! Thanks again

  • @coupedsg
    @coupedsg 2 месяца назад +1

    Love the cat escaping prevention setup... I also have a Ragdoll and done something Similar!

  • @temidayoogunyemi78
    @temidayoogunyemi78 2 года назад +1

    You are such a genius and a source of inspiration the turbo spool was much more noticeable, well done 👍

    • @ITSARAPPTTRS
      @ITSARAPPTTRS  2 года назад

      Ah thanks man! Yeah it’s going to be louder when I take the soundproofing off the inside of the bonnet too 👌🏼

  • @CarChris82
    @CarChris82 2 года назад +2

    Great vid mate and fitting guide and from seeing this intake kit in the flesh it looks the nutz 👍🏻

    • @ITSARAPPTTRS
      @ITSARAPPTTRS  2 года назад

      Cheers pal, appreciate that 🙌🏼👍🏼

  • @carfellauk
    @carfellauk 2 года назад +1

    Looks sick bro can’t wait to see what to come with the motor

  • @simonmcmahon4252
    @simonmcmahon4252 2 года назад +1

    Nice vid again dude keep them coming

    • @ITSARAPPTTRS
      @ITSARAPPTTRS  2 года назад

      Cheers pal, appreciate the message again 🤝🏼👍🏼🤜🏼🤛🏼

  • @theAreaMan
    @theAreaMan 9 месяцев назад +1

    I have the same setup on its way for my Golf, so I much appreciate your video! The question I have is: How is the serviceability of the filter? Is it pretty quick and easy to remove and reinstall?

    • @ITSARAPPTTRS
      @ITSARAPPTTRS  9 месяцев назад

      Awesome! I serviced it once and all you need to do is loosen the screw at the front (don’t take screw out) and take off the clamp to the hose and remove the small pipe to the underneath and remove the box. It’s actually quite simple. Then take the screws out around the filter and remove the cone. Replace it and put everything back together. It’s a bit more work but makes you feel like a mechanic and the Mrs will be impressed 💪🏼

    • @theAreaMan
      @theAreaMan 9 месяцев назад +1

      Thanks!@@ITSARAPPTTRS

  • @saaustralia2875
    @saaustralia2875 Год назад +1

    Mate, that does look the nuts! Im now on the hunt for one.

    • @ITSARAPPTTRS
      @ITSARAPPTTRS  Год назад

      Cheers pal, yeah pleased with it now

  • @jasonwalsh9211
    @jasonwalsh9211 2 года назад +2

    Good work again mate, and what a f**kin bargain that air intake was 👊🏻.
    Did you check your front air scoop and split it, apparently part of the OE air duct/scoop is partly blocked off, this can be modified to allow more air in to the filter 👍🏼

    • @ITSARAPPTTRS
      @ITSARAPPTTRS  2 года назад +1

      Thanks mate! Yeah I removed the front part but thinking about it, I need to check again when I get home to see if there is actually an opening where it screws into 🤔 I’ll let you know

    • @jasonwalsh9211
      @jasonwalsh9211 2 года назад +1

      @@ITSARAPPTTRS yeah, I think on your model the front duct maybe partially blocked off...think there's some details somewhere on the TT forum showing the details... I'll have a look and pm you

  • @ucze21
    @ucze21 2 года назад +1

    Another quality upgrade, well done and waiting for more! Looking to get a TT myself, just curious what is it like on fuel? What is your average MPG and what miles can you do on a full tank?

    • @ITSARAPPTTRS
      @ITSARAPPTTRS  2 года назад

      Hey mate, thanks for the message, really appreciate it. It’s ok on fuel to be honest but its all based on how you personally drive of course. I have managed 43mpg on a long motorway run in eco mode but if you drive it hard around town you’ll probably get about 18mpg. Adverse is around 25-28mpg the way I drive. The tank fills up and shows around 375 miles of range.

  • @Sosan0mics
    @Sosan0mics 8 месяцев назад +1

    Any advice on getting the inlet pipe on? I’m really struggling to put mine on 😅😅😅 not many apr inlet pipe videos out there

    • @ITSARAPPTTRS
      @ITSARAPPTTRS  8 месяцев назад

      The inlet pipe is the easiest part 🤔 It just fits over the intake and turbo elbow

  • @clivecooper3144
    @clivecooper3144 2 года назад

    nice video you are a braver man than me .would like to try on my tt

    • @ITSARAPPTTRS
      @ITSARAPPTTRS  2 года назад

      Honestly, I just learn from RUclips and hope for the best! Cheers

  • @gavinpennington4710
    @gavinpennington4710 2 года назад +1

    Hiya mate, I've got a 2011 manual tts, I don't know alot about cars really, is this better than a ram ait intake? Is it the same thing?

    • @ITSARAPPTTRS
      @ITSARAPPTTRS  2 года назад

      This won’t fit your 2011 TT. It’s for the MK3 TT only from 2015 onwards

    • @gavinpennington4710
      @gavinpennington4710 2 года назад +1

      But is it the same thing? As a ram Air? Or is yours better?

    • @ITSARAPPTTRS
      @ITSARAPPTTRS  2 года назад

      @@gavinpennington4710 they are both air Intakes, but as to what one is better, that’s personal preference

    • @gavinpennington4710
      @gavinpennington4710 2 года назад

      So the performance is the same?

  • @Angelo-qq2jf
    @Angelo-qq2jf 2 года назад +1

    what tools should i need to get started on this? Or in general what tools do i need lol

    • @ITSARAPPTTRS
      @ITSARAPPTTRS  2 года назад

      You’ll need a T30, a small ratchet set and a screw driver. Nothing major

  • @Terencechiu612
    @Terencechiu612 2 года назад +1

    Do u have a link for the engine cover? I would like to have one for mine as well THX

    • @ITSARAPPTTRS
      @ITSARAPPTTRS  2 года назад

      You can find them on eBay. Here is one. www.ebay.co.uk/itm/264664740778?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=g8cWWa8pRHa&sssrc=2349624&ssuid=V7iJwKuCQFO&var=&widget_ver=artemis&media=COPY

    • @Terencechiu612
      @Terencechiu612 2 года назад +1

      Glad I watched your video, I was doubting this will fit in TT 🤣

    • @ITSARAPPTTRS
      @ITSARAPPTTRS  2 года назад +1

      @@Terencechiu612 What the engine cover? If you get one all you need is 2 little extra screws. The engine bay has the holes but not plugs for them extra two you need. Cost £5 from Audi. I’ll share the code numbers

    • @Terencechiu612
      @Terencechiu612 2 года назад

      @@ITSARAPPTTRS yes please, thank you so much