Marvin Eady you’re welcome. I must admit that the video makes the removal of the grille tabs from the bumper seem easier than it is. Those tabs are metal and don’t flex easily.
Dude thank u so much the other video I watch the person didn’t tell me that there were the push pins by the grills and one of mine broke when I was trying to figure it out thank u so much
Nice I'm doing that to mine this weekend coming up! Only cost me 80$ straight from dodge in Los angeles. Now I just need the lower hellcat airbox to make the nostrils actually do something for the car
andres castillo I haven’t tuned it after the lower airbox/tube, no issues. It should operate as it normally would at lower temps. If you want to tune for the additional airflow then of course you’ll see measurable gains. I assume you meant tune for the airbox, not the grille 😂 but no tune for the new grille.
How do you install the grille bezels/snorkels/inlets/intakes whatever you want to call them into the grille itself? One of mine is loose and I can't seem to get it to snap back in
RageFilms I had the same problem. There are 4 little tabs on the back of those bezels that have to fully seat. I initially rushed the job and one of the tabs just wouldn’t snap in by pushing from the front with the bumper on... 😩 I left it loose until I got back behind the bumper for another part install and was easily able to snap it in from the back. Try finessing it by pulling forward on the grille while pushing in on the bezel. If you stick your finger inside at the corner of the bezels you can feel those tabs.
Hi Robert, the new grille won’t accept the ScatPack emblem from the old grille. There is a new part number for the 2019+ grille emblem. I was awaiting an LED scatpack emblem when I installed this, which I now have installed.
Thanks for the content. I’m wanting to swap caliper and brake assy on my 19 charger SXT, with overside brakes on all 4 wheels from a scat pack or hell cat. Anyone with some insight, not seeing any thing on RUclips? Thanks
I was curious, is that plastic solid black piece on the front bumper, that sits between the grille areas a separate piece that can be swapped out? I wanted to get rid of my license plate and there’s holes in that plastic piece now. Thx
Hey bro i have a 2019 rt with the appearance package that it looks like a scat pack do i need to change the bottom grille as well or is it the same design?
Justin Alaquinez it looks like the 19 RT has the older bottom grille to match the top so yes, you’d need both if you want them to match. I’m rocking just the new top grille currently.
Is there anyway you can put your badge from the previous grill onto the new grill with the snorkels??? I wanna get the same grill but I don’t wanna lose my Daytona badge
Anthony Gaytan www.stevewhiteparts.com/steve-white-catalog-2019-dodge-charger-srt-scat-pack-daytona-upper-grille-with-bezels-dual-inlets-oe-swmsrtgrille?parent=1003
Awesome video man. I've watched a couple, but yours is the clearest on showing where the bolts and pushpins are specifically. I have the upper in my garage and will give it a go on my 2016 Scat Pack when I have some time. Updates to come. One question: Does the older Scat Pack emblem not work on the new grille?
Shaun W I appreciate the comment! For a first attempt at working on a car/making a video it was a fun project with good results. I was hoping I would just be able to pull the emblem off and reuse but the older emblem clips into a dedicated space/slot on the old grille. That space isn’t present on the new grille and won’t work without some modifications (like gluing studs to the back of the old emblem then bolting on).
Ali Yazbek Thanks for watching! Here’s their lower grille links! WITHOUT adaptive Cruise: www.stevewhiteparts.com/oem-parts/mopar-grille-lower-68394592aa/?c=YT1kb2RnZQ%3D%3D WITH adaptive cruise cutout: www.stevewhiteparts.com/oem-parts/mopar-grille-lower-68394591aa
Had a hard time trying to remove the black fascia part underneath the hood . Was wondering if I had to remove the entire bumper to change just the emblem. 2019 scatpack charger
Dennis Wells I tried for the longest just to remove that black piece when I went back to replace the emblem... it wasn’t happening. No videos of anyone else with any luck either. Yes I had to remove the bumper.
Nice scat bro, let me ask you this is the grill actually giving you the airflow to your engine bay like the 2019 scats and hellcats do, or is it just cosmetic work if install it for a lesser year?
Aaron Zubia It’s purely cosmetic on 2019 Scat Packs as well. In order to make it function as an air intake, you need the 2019 Hellcat Lower Air Intake, baffle and air tube which I have also installed. This will allow outside air to flow directly into the intake from one of the “nostrils”. Functional Grille! 2019 Hellcat air box install video ruclips.net/video/izm2S-ENk3w/видео.html
M&P Shield I still have them mismatched and I never notice. You’d have to stare at it to say it has a different pattern. The “loops” are a little wider in the new
greenolive Hi! As you suspected, your dealership is wrong. All 2015+ models with the SRT/SuperTrakPack appearance front bumper will be a direct swap. This includes the Daytonas! The first car I saw with the grille swap before doing mine was a Daytona! Here’s a link to his Instagram. instagram.com/p/BpxQl5TlGHw/?igshid=1df6qrgh50ekp
Shaun W Yes I believe those side markers must be unplugged to have enough space, and they’re a pain without being able to see the connector. T25 I believe is the star bit if you want to unscrew the side marker to get a better view of the connector.
Whoah. i Could not get those weird push pin side holders that held the bottom of the grille in. had to bring out the dremel on those bad boys. i have plenty of push pins.
J G www.stevewhiteparts.com/steve-white-catalog-2019-dodge-charger-srt-scat-pack-daytona-upper-grille-with-bezels-dual-inlets-oe-swmsrtgrille?parent=1003
Sam Wright , no it doesn’t. The nameplates are separate parts. It should be part #68396075AA (which seems to be replaced now as 68396075AB) I have not purchased to confirm. This is the only link I found showing the images: www.dodgepartsoverstock.com/showAssembly.aspx?ukey_product=75671957&ukey_assembly=7553810
Hit that LIKE 👍 button if you’ll be upgrading to the 2019 Grille! Links below👇 Upper Grille with Inlet Bezels www.stevewhiteparts.com/steve-white-catalog-2019-dodge-charger-srt-scat-pack-daytona-upper-grille-with-bezels-dual-inlets-oe-swmsrtgrille?parent=1003 Lower Grille WITHOUT Adaptive Cruise www.stevewhiteparts.com/oem-parts/mopar-lower-grille-68394592aa/?c=YT1kb2RnZQ%3D%3D Lower Grille WITH Adaptive Cruise www.stevewhiteparts.com/oem-parts/mopar-lower-grille-68394591aa
Looks like a pretty ease DIY. Thanks for posting. May do the same for me and my wife's 17 and 18 Daytonas.
Marvin Eady you’re welcome. I must admit that the video makes the removal of the grille tabs from the bumper seem easier than it is. Those tabs are metal and don’t flex easily.
Dude thank u so much the other video I watch the person didn’t tell me that there were the push pins by the grills and one of mine broke when I was trying to figure it out thank u so much
Thanks 🙏🏾. You’re the first install video for the new grill.
Appreciate the video! Watched a couple before yours but this was the best!
I appreciate that! Hope it helped
Yessir. That's what helped me get it done
Nice I'm doing that to mine this weekend coming up! Only cost me 80$ straight from dodge in Los angeles. Now I just need the lower hellcat airbox to make the nostrils actually do something for the car
ScatPackin good deal! Even better if you can do the grille and airbox all in one shot 😉
NewKind yep this is what I’m doing next does it need a tune for it ?
andres castillo I haven’t tuned it after the lower airbox/tube, no issues. It should operate as it normally would at lower temps. If you want to tune for the additional airflow then of course you’ll see measurable gains. I assume you meant tune for the airbox, not the grille 😂 but no tune for the new grille.
Looks great and thanks for the link to Steve White. Started researching after I saw a girl who works for Dodge selling them over IG for $350 😒😂
Wily Kingpin lol gotta respect her hustle ... but nope 😅
Wow my dealer has the whole kit for 110
Lmao, butter knife is the oldschool multiuse tool 😁
💯 Probably the most versatile tool I’ve got... I highly recommend one lol
Nice video man! Doing mine this weekend 👀
It’s gonna look bad ass 💪🏽
How do you install the grille bezels/snorkels/inlets/intakes whatever you want to call them into the grille itself? One of mine is loose and I can't seem to get it to snap back in
RageFilms I had the same problem. There are 4 little tabs on the back of those bezels that have to fully seat. I initially rushed the job and one of the tabs just wouldn’t snap in by pushing from the front with the bumper on... 😩 I left it loose until I got back behind the bumper for another part install and was easily able to snap it in from the back. Try finessing it by pulling forward on the grille while pushing in on the bezel. If you stick your finger inside at the corner of the bezels you can feel those tabs.
Can you do a video on how to remove the bumper protectors you painted black that are destroying your factory paint too!?
Hi nice viceo thanks for making it. Is there a reason Why you didn't put the Scatpack emblem on your new grill?
Hi Robert, the new grille won’t accept the ScatPack emblem from the old grille. There is a new part number for the 2019+ grille emblem. I was awaiting an LED scatpack emblem when I installed this, which I now have installed.
Thanks for the content.
I’m wanting to swap caliper and brake assy on my 19 charger SXT, with overside brakes on all 4 wheels from a scat pack or hell cat. Anyone with some insight, not seeing any thing on RUclips? Thanks
New sub! beautiful Scatty!!!
Shocka252 I appreciate that 💪🏽 Like what you doing with the beats
I was curious, is that plastic solid black piece on the front bumper, that sits between the grille areas a separate piece that can be swapped out? I wanted to get rid of my license plate and there’s holes in that plastic piece now. Thx
Hey bro i have a 2019 rt with the appearance package that it looks like a scat pack do i need to change the bottom grille as well or is it the same design?
Justin Alaquinez it looks like the 19 RT has the older bottom grille to match the top so yes, you’d need both if you want them to match. I’m rocking just the new top grille currently.
NewKind but it fits with 2019 R/T?
Christian Arispe yes it will fit 2019 RT
NewKind link to grille
Is there anyway you can put your badge from the previous grill onto the new grill with the snorkels??? I wanna get the same grill but I don’t wanna lose my Daytona badge
Just ordered my kit from the dealer last week waiting
jay jay how much do you think dealer will charge to install?
Tyler Dooley their labor rate times 2-3 hours would be my guess... plus the part.
fits the 2016 hellcat too
jjak75 yessir
Looks great
Do you know the part numbers to the bumper, top and bottom grille? If not where did you order from?
Anthony Gaytan www.stevewhiteparts.com/steve-white-catalog-2019-dodge-charger-srt-scat-pack-daytona-upper-grille-with-bezels-dual-inlets-oe-swmsrtgrille?parent=1003
Anthony Gaytan Bottom bezel WithOUT Adaptive Cruise www.stevewhiteparts.com/oem-parts/mopar-lower-grille-68394592aa/?c=YT1kb2RnZQ%3D%3D
Anthony Gaytan Bottom bezel WITH Adaptive Cruise www.stevewhiteparts.com/oem-parts/mopar-lower-grille-68394591aa
Thank you so much
Awesome video man. I've watched a couple, but yours is the clearest on showing where the bolts and pushpins are specifically. I have the upper in my garage and will give it a go on my 2016 Scat Pack when I have some time. Updates to come. One question: Does the older Scat Pack emblem not work on the new grille?
Shaun W I appreciate the comment! For a first attempt at working on a car/making a video it was a fun project with good results. I was hoping I would just be able to pull the emblem off and reuse but the older emblem clips into a dedicated space/slot on the old grille. That space isn’t present on the new grille and won’t work without some modifications (like gluing studs to the back of the old emblem then bolting on).
Where’d you get the buttom grille I only found the top one
Ali Yazbek Thanks for watching! Here’s their lower grille links!
WITHOUT adaptive Cruise:
www.stevewhiteparts.com/oem-parts/mopar-grille-lower-68394592aa/?c=YT1kb2RnZQ%3D%3D
WITH adaptive cruise cutout:
www.stevewhiteparts.com/oem-parts/mopar-grille-lower-68394591aa
Thank you I’ve been looking for this all day
Engine bay clean asf lol
Would I have to remove the entire bumper just to swap out the emblem on the grill? 2019 scatpack
Had a hard time trying to remove the black fascia part underneath the hood . Was wondering if I had to remove the entire bumper to change just the emblem. 2019 scatpack charger
Dennis Wells I tried for the longest just to remove that black piece when I went back to replace the emblem... it wasn’t happening. No videos of anyone else with any luck either. Yes I had to remove the bumper.
Hey OP does the lower grille pop out easy as well? I need to do the lower part because I hit a bird chipped some teeth off it
Does it come with the bezels?
No, each bezel is a separate part number (right & Left)
Nice scat bro, let me ask you this is the grill actually giving you the airflow to your engine bay like the 2019 scats and hellcats do, or is it just cosmetic work if install it for a lesser year?
Aaron Zubia It’s purely cosmetic on 2019 Scat Packs as well. In order to make it function as an air intake, you need the 2019 Hellcat Lower Air Intake, baffle and air tube which I have also installed.
This will allow outside air to flow directly into the intake from one of the “nostrils”.
Functional Grille! 2019 Hellcat air box install video ruclips.net/video/izm2S-ENk3w/видео.html
@@NewKind I have an 18 hellcat and have the same lower airbox as the 19 HC, dont know if the older ones do, but I verified before buying my grille
Is it possible to add the emblem to this grill?
Does this work on a RT
I'm looking to get a charger road track pack soon 2016 charger and you have the body look for my I want
Whoa Weezy make it happen 💪🏽
@@NewKind ima try to
Did you change out lower grille as well? Or just top?
Mark just the top for now since the lower grille shipped cracked
NewKind damm alrighty bro is it on back order? I ordered mine and Steve white site said it was 5-6 weeks
Mark damn I guess so now... one part came in 2 days, the other took 1 week.
@@NewKind does the new lower Grill look much different than the old? I was thinking of just doing the upper one
M&P Shield I still have them mismatched and I never notice. You’d have to stare at it to say it has a different pattern. The “loops” are a little wider in the new
Hi!! Will this grille fit my 2017 Daytona? Thanks!
greenolive Hi! As you suspected, your dealership is wrong. All 2015+ models with the SRT/SuperTrakPack appearance front bumper will be a direct swap. This includes the Daytonas! The first car I saw with the grille swap before doing mine was a Daytona!
Here’s a link to his Instagram. instagram.com/p/BpxQl5TlGHw/?igshid=1df6qrgh50ekp
NewKind awesome ! Thanks for a quick reply. God bless!!
Car looks amazing? What color is that
Eurospeed Thanks! It’s Torred (Red)
did you have to remove the fog/and side marker ligjhts? i got the fog to unplug but cant get the side marker disconnected.
Shaun W Yes I believe those side markers must be unplugged to have enough space, and they’re a pain without being able to see the connector. T25 I believe is the star bit if you want to unscrew the side marker to get a better view of the connector.
@@NewKind So much easier to remove with the T25. Thanks for the quick answer dude.
Whoah. i Could not get those weird push pin side holders that held the bottom of the grille in. had to bring out the dremel on those bad boys. i have plenty of push pins.
1. thing, there are actually two 10mm bolts up top, so that makes 4 per side (including the 2 inside the wheel well).
Where can I buy this
www.stevewhiteparts.com/p-2019-charger-srt-scat-pack-daytona-hellcat-upper-lower-grille-bezels-dual-inlets-swmsrtgrille2
Does this fit a 2019 RT
The Real Alexis Padron yes
How much was the part and shipping?
J G www.stevewhiteparts.com/steve-white-catalog-2019-dodge-charger-srt-scat-pack-daytona-upper-grille-with-bezels-dual-inlets-oe-swmsrtgrille?parent=1003
What's up London your classmate :) In 3rd grade
The new grill doesn’t come with scatpack badge? Awesome video.
Sam Wright , no it doesn’t. The nameplates are separate parts. It should be part #68396075AA (which seems to be replaced now as 68396075AB)
I have not purchased to confirm. This is the only link I found showing the images:
www.dodgepartsoverstock.com/showAssembly.aspx?ukey_product=75671957&ukey_assembly=7553810
So if I have an regular rt and I install a Srt 392 front bumper. Can I still do this install?
lester jones yes sir... that front bumper is the only requirement for a direct fit of the new grille.
Where you located, do mine
TLand Hboogie Middle Georgia. Give it a shot, it was my first time ever removing a car bumper
Good video, don’t care for the intro music...
Hit that LIKE 👍 button if you’ll be upgrading to the 2019 Grille! Links below👇
Upper Grille with Inlet Bezels
www.stevewhiteparts.com/steve-white-catalog-2019-dodge-charger-srt-scat-pack-daytona-upper-grille-with-bezels-dual-inlets-oe-swmsrtgrille?parent=1003
Lower Grille WITHOUT Adaptive Cruise
www.stevewhiteparts.com/oem-parts/mopar-lower-grille-68394592aa/?c=YT1kb2RnZQ%3D%3D
Lower Grille WITH Adaptive Cruise
www.stevewhiteparts.com/oem-parts/mopar-lower-grille-68394591aa
Bro you didn’t show how to remove😣
No bro scatpack looks better that hellcat grille
Good video but u got to speak up !! Can barley hear you
bvc215 Thank you. Apologies for being half asleep! Hope it’s still able to help.
Why are you whispering, can barely hear you 👂 😂
Still ain’t a 2019 doe
You probably drive a 2008 V6 charger
Anonymous Lol what makes a 2019 any different other than paying a shit ton more
can't hear half the stuff you're saying man
Daniel DeArmond 🔇🔈🔉🔊
@@NewKind yeah no shit
You showed like 35% of the install. Didn’t show the bumper coming off, didn’t show removing the grill or installing the new one. Very lazy video man.
Lose the music
Brian no.
i
If u have a scat leave it a scat if u have a hellcat leave it hellcat dnt put demon shit on it..make u look funny when the real deal pull up
🤪