How to set Timer XY-WJ01 and wiring for incubator - English

Поделиться
HTML-код
  • Опубликовано: 22 янв 2025

Комментарии • 39

  • @simulatedfish1995
    @simulatedfish1995 Год назад +2

    Thank you for the clear instructions and assistance and setting this up for DIY use

  • @balik_tutkusu
    @balik_tutkusu 3 года назад +2

    Thank you for explanative video. You saved me to loose time to decipher this control unit.

  • @nonam2863
    @nonam2863 3 года назад +3

    best youtuber and videos bro big fan from nepal

  • @pearljameric
    @pearljameric 2 года назад +1

    This will work well for my live well timer in my bass boat. Thanks

  • @robertoflorendo7956
    @robertoflorendo7956 4 месяца назад +1

    is there delay off timer function? Can I use that in water pump?

    • @Umairworkshop
      @Umairworkshop  4 месяца назад

      Yes it can work for waiting time and running time but this is for small electronics if using with water pump cn101 timer is recommended

  • @anooky1
    @anooky1 Год назад +2

    Humidity and temperature controller mai kosi acha kam karta hai ?

  • @robbousquin9630
    @robbousquin9630 10 месяцев назад +1

    could you tell me why my unit " ALWAYS " "Always" shuts down completely after 5 mins exactly 5 mins. is there a setting someplace to prevent this thank you

    • @Umairworkshop
      @Umairworkshop  10 месяцев назад

      I think it is set on saving mode only display will shut off but will keep working, if it shut down the circuit and you have to set again then it might be a circuity issue.

  • @v.gedace1519
    @v.gedace1519 2 года назад +2

    What happens if e.g. program P6 is running, the power fails and after a few minutes the power is back?
    In this case, does the last used program (P6 in our example) start automatically or must some button be pressed?

    • @Umairworkshop
      @Umairworkshop  2 года назад +1

      Once the setting is set it will be save on it , if light fails and come back it will start counting from the start

  • @lynnzimmerman4853
    @lynnzimmerman4853 Год назад +1

    I am controlling an LP generator and would like the timer to be on OUT for 1 hour (OP) and remain off for 2 hours (CP), then loop back to the beginning to start the timer again. I am using (P4) but I am having trouble with setting the times with multi decimal points, etc. Can you show me what the settings should be for 1 hour when displayed on the screen, showing the number and how many decimal points show?

    • @Umairworkshop
      @Umairworkshop  Год назад

      If set like 9.9.9 it means these are minutes and if set like 99.9 it means it is hours

  • @enesaydn6054
    @enesaydn6054 2 года назад +1

    Thank you for video sir. Can you explain too p4 if it possible

    • @Umairworkshop
      @Umairworkshop  2 года назад

      Here is the full detail
      ruclips.net/video/dPKPzO2MAh8/видео.html

    • @enesaydn6054
      @enesaydn6054 2 года назад +1

      @@Umairworkshop thanks a lot

    • @Umairworkshop
      @Umairworkshop  2 года назад

      @@enesaydn6054 you are welcome

  • @enriqueavila2234
    @enriqueavila2234 2 года назад +2

    Muy bueno y bien explicado gracias solo mejor que fuera en Español

  • @pearljameric
    @pearljameric 2 года назад +1

    Is there a way to turn it completely off?

    • @Umairworkshop
      @Umairworkshop  2 года назад

      Yes it can be turn off by on off button

  • @cyberbeast1789
    @cyberbeast1789 3 года назад

    Is your FAN 220v AC? i just bought one of this and upon checking the board inside, the relay spec is 20A 14vdc and 125vac only. And in order to safely run 220v appliances a relay must have 250vac. from philippines.

    • @Umairworkshop
      @Umairworkshop  3 года назад

      Yes fan is 220v , relay must be 220v or it will burn

  • @yasinkizilirmak7468
    @yasinkizilirmak7468 7 месяцев назад

    Thank you.

  • @anooky1
    @anooky1 Год назад +1

    یہ بہتر stc سے ??

    • @Umairworkshop
      @Umairworkshop  Год назад

      Yeah sirf timer hai

    • @anooky1
      @anooky1 Год назад

      @@Umairworkshop acha mai tu samja tha ya humidity and temperature controller hai

    • @anooky1
      @anooky1 Год назад +1

      @@Umairworkshop stc mai bhi humidity and temperature setting controller hai woh acha nhi hai ??

    • @Umairworkshop
      @Umairworkshop  Год назад +1

      @@anooky1 stc series bhi theak hain lekin un mein degree difference ata hai

    • @anooky1
      @anooky1 Год назад +1

      @@Umairworkshop ZFX.W9002 ke bari btay ya bhi temperature or humidity sath mai hai?