KnucklesGSM Hey man ! Enjoy your videos, I just bought myself a TM Hi-Capa 5.1 & I was wondering after how much time will I have to start to change parts? (I am considering using green gas)
I made the mistake of the back sight. I lost my spring under neath the sight, now my gun won't lock back when out of rounds. Does this have to do with the spring or another issue? Without the spring under the sight my nozzle moves forwards and won't go back after cycling. Please help me, thanks.
When you do use Superlube Grease which specific one do you use, any will do? I've been using RC shock oil 100% silicone lube its thinner than I'd like (15w). Stick with the lube but go heavier/thicker 35w... Or switch to grease? All my gaming is done in the dead of summer. Kind Regards!!
Hi, I repair the TM hi-Capa of my friend, I replace the lower, the spring guide and air nozzle, the pistol work fine but bbs are not engaging, the air nozzle is always pushing them down? Any idea ?
Im a relatively new pistol owner i've been playing for a year and a half and i just recently bought my pistol. I havent looked but could you upload a video stating how to take everything apart from the slide?
Make sure oil doesn't get to the hop -up rubber otherwise it will ruin the accuracy. Not sure how you can avoid that since the gas already contains a bit of oil.
Murder oil seems hard to come by! Can't find it anywhere in europe, and the US shops seem to be out of stock. Do you have a recommendation for a good alternative? I haven't cleaned or lubed my brand new Hi-Capa yet, but I've been using Swiss Arms Silicone Oil spray, that's probably the bad stuff, isn't it?
you can use RC shock oil, 40-60w those work well if you have them in sweden. I'm not a big fan of sprays myself but if it works and doesn't gunk it up or dry out fast go for it
All the airsoft stores here seem to carry the sprays and nothing else sadly, but I bet there are online stores in europe that carry this stuff, needs to find myself a euro hi capa specialist!
My back sights are a bit wobling. I did screw the screw as I thought it can stand the force I used. But it still keeps wobling a bit, it's not tight. Is it ok, or it will eventualy break? Or tightness of screwing it doesn't affect that? Thanks KnucklesGSM
I have a tm Hicapa 4.3 and I lost the screw that goes on top of the sight and i was wondering if you know where i can buy a new screw or do i need that screw at all? or should i just buy a new sight and if so what sight would you recommend?
Richard Del Mundo your gonna have to find one that fits it, i cant remember off hand, but take the BBU only with you to home depot and try one by one to find out which one works
If u still want to know, I own one and it's absolutely flawless it is exactly like the tm except it is metal and it is still just as good and just as accurate
Hi I have a question, im trying to upgrade my TM 4.3, but i cannot find any sights available for it. I was wondering if the 5.1 sights can be used on the 4.3?
Спорт
Your videos still slap and Quality holds up! About to build my First Hi Capa you have been so helpful thank you
I’m watching this in 2018, and this video is very helpful 👍🏼
This was really helpful. Thanks.
Thanks so much my dude
Thank you
Is Murder Oil discontinued? Can't find it in stock anywhere
YES NEW VIdEO!!
KnucklesGSM Hey man ! Enjoy your videos, I just bought myself a TM Hi-Capa 5.1 & I was wondering after how much time will I have to start to change parts? (I am considering using green gas)
nice vid..noob here... just got WE(too late to buy TM till i watched ur vids) what you call that frame that has long rails?
I made the mistake of the back sight. I lost my spring under neath the sight, now my gun won't lock back when out of rounds. Does this have to do with the spring or another issue? Without the spring under the sight my nozzle moves forwards and won't go back after cycling. Please help me, thanks.
When you do use Superlube Grease which specific one do you use, any will do? I've been using RC shock oil 100% silicone lube its thinner than I'd like (15w). Stick with the lube but go heavier/thicker 35w... Or switch to grease? All my gaming is done in the dead of summer.
Kind Regards!!
which color would you recommend, btw i run a hi capa with metal slide and plastic outer barrel, am bbu, and the rest is standard
Hi, I repair the TM hi-Capa of my friend, I replace the lower, the spring guide and air nozzle, the pistol work fine but bbs are not engaging, the air nozzle is always pushing them down? Any idea ?
Im a relatively new pistol owner i've been playing for a year and a half and i just recently bought my pistol. I havent looked but could you upload a video stating how to take everything apart from the slide?
ivan molony got a video on that already
Where can i get a cheap silver outer barrel for the we g17
30USD for shiping to Slovakia. That's 50 bucks for three oilz. Daaamn.
Make sure oil doesn't get to the hop -up rubber otherwise it will ruin the accuracy. Not sure how you can avoid that since the gas already contains a bit of oil.
Don’t use green gas.
Murder oil seems hard to come by! Can't find it anywhere in europe, and the US shops seem to be out of stock. Do you have a recommendation for a good alternative? I haven't cleaned or lubed my brand new Hi-Capa yet, but I've been using Swiss Arms Silicone Oil spray, that's probably the bad stuff, isn't it?
you can use RC shock oil, 40-60w those work well if you have them in sweden. I'm not a big fan of sprays myself but if it works and doesn't gunk it up or dry out fast go for it
All the airsoft stores here seem to carry the sprays and nothing else sadly, but I bet there are online stores in europe that carry this stuff, needs to find myself a euro hi capa specialist!
what gloves :)
My back sights are a bit wobling. I did screw the screw as I thought it can stand the force I used. But it still keeps wobling a bit, it's not tight. Is it ok, or it will eventualy break? Or tightness of screwing it doesn't affect that? Thanks KnucklesGSM
you can add shims underneath it to tighten it
Do you mean shims underneath the screw, or underneath whole backsights?
I have a tm Hicapa 4.3 and I lost the screw that goes on top of the sight and i was wondering if you know where i can buy a new screw or do i need that screw at all? or should i just buy a new sight and if so what sight would you recommend?
Richard Del Mundo your gonna have to find one that fits it, i cant remember off hand, but take the BBU only with you to home depot and try one by one to find out which one works
What do you think about the z gun hicapa? Is it worth it? And is it really tm compatible?
If u still want to know, I own one and it's absolutely flawless it is exactly like the tm except it is metal and it is still just as good and just as accurate
Hi ! How about the original slide , cos it is plastic one , so which oil did you recommend ? tks
+Jimngu Gk internals- murder oil
slide itself- you can use silicon oil
murder oil is available on evike
My sight ended up breaking off during a game and I couldn't find the spring do you know how I could fix that?
Artics Designs id replace them with different sights, the TM ones break alot due to potmetal screw, unless you can hit up home depot and mod it
Hi I have a question, im trying to upgrade my TM 4.3, but i cannot find any sights available for it. I was wondering if the 5.1 sights can be used on the 4.3?
They can
Wuts sup bro do u have anything for sell
I read something about putting grease between the slide the and body so there's less friction when it blowsback. Good idea?
grease is good for rails, its what i use but for basic, the oils in the video work just fine
KnucklesGSM also, I run propane, do I need to lube anywhere else or if what you stated in the video good enough?
KnucklesGSM can i use a hicapa 4.3 slide on a xtreme 45?
I'm looking for a hybrid slide to put on my 4.3 but don't really know where to find any. I was wondering if you can help me out.
they have been discontinued a long time ago, not sure when a remake is coming around
Alright thank you. Keep up the good vids
I like superlube.
Kiwi clothes work nice
what millimeter is the 6 mm
I mean 6" barrel
6 mm.
+Kristoffer Strid no length
+TrollololMan242 not width
da hora hemmm 👏👏👏👏👏👏👏👏👏👏😲😲😲😲😲😲😲💣💥💣💥💣💥💣💥💣💥💣💥💥💣💥💣💥💣💥💣💥😆😆😆😆😆😆
If you have any for sale message me brah