If you love this video, give it a like or subscribe to support this channel by clicking the link below... 😊 ruclips.net/user/CoggieBike If you want me to restore your bike for free labor, just comment down below or message me @ my facebook account facebook.com/coggiebike
Nice to see more Mechanics out there fixing up nice bikes, but I got 1 big tip for you. Don’t use Grease in cables always use a lubricant grease is too thick and can catch sand easily, a lubricant is much thinner and will “lube” your cable better than grease. Which results in better and faster shifting
Tsk tsk hands down sobrang galing mo boss. Got my first upgrade/retrofit pero mas lalo ako na inspire dito po. Yung next target ko to buy old frame tapos install-an ng maayos ayos na groupset (second hand!) Nice edit po boss! Sobrang kalma lang
Howdy Coggie, beautiful job on this bike! I can tell you love the work you do. I'm a bike mechanic in Argentina and I always use a resin polish to really bring up the colours and the shine of the frame before assembling the bike, you could try it and see what a difference it makes too! Saludos desde Argentina 💪🏽💪🏽
@@Jenoxen yo uso un producto llamado Autopolish que se consigue en Argentina, vendría a ser una pasta en base a resina de gama media aquí. Bastante fácil de trabajar por ser líquido y revive muy bien la pintura (también remueve los rayones superficiales fácilmente)
Everything was cool but never use grease on the spring and the damper only the seals because the grease and the oil from the lowers will mesh up and dont use grease on the bolts threads use thread lock they might get loose
A year late, but it depends on the fork model. Follow what the manufacturer recommends; my manitou fork calls for “generous greasing” of the spring and damper seals. With that being said, you have to use the correct grease, one that’s designed to come in contact with fork oil and doesn’t interfere. I use slickoleum, as the ‘prep-m’ grease manitou used to make is prohibitively expensive lol
Hello po kuya, andito na naman ako Hahahaha very satisfying talaga mga uploads mo. Lagi tuloy ako napapacomment. Ingat po lagi, more bike restoration to come 😍
I just restored a Bianchi MTB, can't remember the model. Anyhow, after loads of cleaning, new drivetrain, brake pads, cables, adjusting here and there, throw in a set of fenders.. damn.. drives great and doesn't look half bad. I would call it a win-win if an old quality bike gets a new life and somebody actually benefits from using it. Recycling at its best.
I think that's exactly what my SR Suntour fork needs on my Giant Talon 2 (2017). I can't do it myself; looking for a bike mech who can execute the procedure. Lots'a love, cheers, & Mabuhay, from tropical Philippines! #KeepBiking
Sana ako na sunod na mapalad na marestore ang aking munting folding bike na keystone ares steel hehehe Pero ok lang din kung di mapili hehehe Suporta ako sayo sir Napaka husay mo!🙏👍👏👏👏👏
2 thing that you shouldnt do on rotor and brake pads, dont touch the surface. Oil (human oil) on your hands can contaminate it. Use sand paper to clean and make the surface even.
Hello!!! Good morning, I would like to know if you can help me, I have a MTB from the 90s. But I have a question, I don't know its size and I searched the internet and I haven't found anything. This is a 58 horizontal tube and a 43 vertical tube. Could you tell me what size this tube measurement is equivalent to? A greeting and thanks in advance.
Dejas muy en segundo plano las suspenciones, comprendo que es para reducir costos, pero almenos buscar una forma de "rehacer" las barras debe de existir
Howdy coggie just a fyi when handling brake rotors wear clean rubber gloves because the oils on your skin can can contaminate them I've learned that the hard way by not being able to stop so now I wear gloves when changing rotors just my 2 cents but other then that great restoration as always
This is an excellent choice ruclips.net/user/postUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L for those of you wanting an inexpensive alternative to what some would call a trendy purchase. I purchased this for my 62 year old father who is 6'4". He will fit this frame well with a slightly longer seat post. The frame and wheel construction are high quality. The brakes are marginal but you get what you pay for. My only complaint is the front fork dropouts which were misaligned on our specific fork. This made mounting the front tire difficult while aligning the brake rotor to caliper and front axle. Once the axle nuts were tightened down the misalignment issue was resolved.
I have a 2 different types of crank puller, you may look at my previous bike restorations as I used it. Unfortunately the crank has been stuck so strong and the crank thread has been loosed so I have no choice but to cut the spindle.
A blessed day Sir Coggie Bike, from Lipa City, Batangas po., meron akong ginagamit na MTB sa aking hanapbuhay. Pinili kong magbike araw araw upang makatipid sa aming pang araw araw na gastusin. Alam kong napakahalaga sa isang bike ng mga ganitong maintenance ngunit sapat lamang ang anking kinikita sa aming gastusin at medyo napapabayaan ko ang aking bike sa mga bagay na kailangan neto. Hangad ko na mapasailalim sa iyong free program na ito at umaasang isa sa mg amapalad na iyong mapili. Ang aking mtb ay aking nabili sa mababang halaga lamang sapagkat ito nga ay napatambak na lamang dahil sa pandemyang dumaan. Nagagamit ko naman ito ng maayos ngunit alam kong hindi tiyak ang aking seguridad. hindi ko alam ang sisimulan sa pagaayos nito at habang nagaaral patungkol dito mula sa mga video sa internet ay nadala ako sa iyong youtube page. Naway ibless ka pa lalo ni Lord dahil sa iyong mga mabubuting gawain. :D :)
Tanong lang po sa inyo ano po tawag sa parang hydrolic sa suntour fork ang sa lockout nagiba kasi akin at bibili sana sa shoppe or lazada pero di ko alam ano ang bibilhin
Too much grease make the bike perform not well kaya kunti lang po grasa gamitin at not all bike parts lagyan mo ng grasa especially the shifter cable kasi macontaminated lang ang grass it is better to use oil to shift well rs always lods
there's trick to realese stuck crank. than you cut it, you better just hit the axle with a hammer 😂 release the left lock, then hit the axle with a hammer, then it will be released, because the crank will be caught by the right BB lock
![Restoration - GT KARAKORAM 3.0 95% (NO REPAINT) BIKE RESTORATION & OVERHAUL + TIPS [4K]](http://i.ytimg.com/vi/ZcEIbX-33Mg/mqdefault.jpg)
![Restoration - GT KARAKORAM 3.0 95% (NO REPAINT) BIKE RESTORATION & OVERHAUL + TIPS [4K]](/img/tr.png)
If you love this video, give it a like or subscribe to support this channel by clicking the link below... 😊
ruclips.net/user/CoggieBike
If you want me to restore your bike for free labor, just comment down below or message me @ my facebook account facebook.com/coggiebike
Surly Corner Bar? это этот РУЛЬ?
location nyo sir?pwd po ba pa restore ko yong bike ko,salamat,pm mo nalang ako sir.
pwd ko pa overhaul sa akin sir?
@@givewayvlog up
покажи видео с полным востановлением бюджетной амортизационой вилки !
Great, simple, clean restoration. Brought new life to a neglected bike. Good for another 20 years
Well said!
@@CoggieBike hhhh
Watching it with teary eyes... My first MTB was Mongoose Tyax Comp,, was so nostalgic to see those Tektro brakes, that Alivio transmission...
Wow, you really had a good memory with your bike, wish I had too
Boss coggie congrats sayo bilis lumaki channel mo. Im happy for you. Keep up the good content. 🙏
Maraming salamat po sa mga kagaya niong sumusuporta
Nice to see more Mechanics out there fixing up nice bikes, but I got 1 big tip for you. Don’t use Grease in cables always use a lubricant grease is too thick and can catch sand easily, a lubricant is much thinner and will “lube” your cable better than grease. Which results in better and faster shifting
Thanks for the tips!
Use ceramic car wax spray. Super slippery, drys out (non wet)
Well done restoration pero boss pwede po kayong gumamit ng acetone (usually used sa pagtanggal ng cutics sa kuko) pantanggal sa sticker residue.
Try ko sir next time, wd40 lang kasi meron ako na madalas ko ginagamit. Salamat!
Tsk tsk hands down sobrang galing mo boss. Got my first upgrade/retrofit pero mas lalo ako na inspire dito po. Yung next target ko to buy old frame tapos install-an ng maayos ayos na groupset (second hand!)
Nice edit po boss! Sobrang kalma lang
Very informative lalo na sa mga gustong magrestore ng mga bike nila... Good job lods... Another bike restored na naman po...👍👏
Maraming salamat sa suporta idol!
Howdy Coggie, beautiful job on this bike! I can tell you love the work you do. I'm a bike mechanic in Argentina and I always use a resin polish to really bring up the colours and the shine of the frame before assembling the bike, you could try it and see what a difference it makes too! Saludos desde Argentina 💪🏽💪🏽
Thanks for the tips!
hay veces que si la laca esta muy vencida en la pintura queda medio opaca la bici, pulirlo con resina resalta el color?
Que producto usás exactamente si no te molesta que preguntemos?
@@mrmarmolerox siiii, tenes que darle bastante y quizás no va a quedar brilloso porque le queda poca laca, pero revive el color como loco!
@@Jenoxen yo uso un producto llamado Autopolish que se consigue en Argentina, vendría a ser una pasta en base a resina de gama media aquí. Bastante fácil de trabajar por ser líquido y revive muy bien la pintura (también remueve los rayones superficiales fácilmente)
bilis ng panahon parang 7k subs lang to dati 24k na Goodjob ka-coggie
Oo nga po eh, sana mag tuloy tuloy lang upload
Your videos are so satisfying. Wish my bike had that kind of maintenance too
Glad you like them!
sarap panoorin ung binabad sa thinner at nilinisan ung small parts. bakbak lahat ng dumi🥰
Glad you like it!
It's a Mongoose Tyax. I've got an old one of them. Good job, man.
Yes it is! Thank you!
Yes i have the same model,Mongoose Tyax 26er
Another satisfying restoration 😊 Waiting ulit sa susunod ❤️
Soon!!
Number one!👍
Thanks again!
Suggest using threadlocker on the chainrings instead of grease. And bike chain specific lubricant for the chain
Everything was cool but never use grease on the spring and the damper only the seals because the grease and the oil from the lowers will mesh up and dont use grease on the bolts threads use thread lock they might get loose
A year late, but it depends on the fork model. Follow what the manufacturer recommends; my manitou fork calls for “generous greasing” of the spring and damper seals. With that being said, you have to use the correct grease, one that’s designed to come in contact with fork oil and doesn’t interfere. I use slickoleum, as the ‘prep-m’ grease manitou used to make is prohibitively expensive lol
Great video! I had this exact bike in Kuwait for a year. Did not look as good as you made it. Well done!
i love watching your restoration..very satisfying!
more restoration to come😇
Awesome, thank you!
You should place the bearing back in the race they came from. The wear patterns will match and not cause additional damage to the race
I very like videos with bike restoration. Very exhausted! Hello from Ukraine!
Glad you like them!
Pretty dope!!
Absolutely amazing welldone, respect
Thank you so much 😀
Hello po kuya, andito na naman ako Hahahaha very satisfying talaga mga uploads mo. Lagi tuloy ako napapacomment. Ingat po lagi, more bike restoration to come 😍
Maraming salamat po sir!
So Relaxing and soothing to watch haha thankyou sa good vibes sir!
Thank you for watching!
I just restored a Bianchi MTB, can't remember the model. Anyhow, after loads of cleaning, new drivetrain, brake pads, cables, adjusting here and there, throw in a set of fenders.. damn.. drives great and doesn't look half bad. I would call it a win-win if an old quality bike gets a new life and somebody actually benefits from using it. Recycling at its best.
Exactly!
Galing talaga
Maraming salamat Rupert!
Nice one, Subscribed. Please keep it comin...
Thank you so much!
I love repaint and that protects that paint with great quality PPF film protection 😁😁😁😁😁
We agree!
@@CoggieBike did you try that wd-40 and waiting that? I think you not patience to using that
Ito na yung inaabangan ko solid👍💪👌🔥
Thank you so much!
Nakss ganda
Salamat jepoy!
lupet tlga 💯🔥🔥🔥🔥🔥
Maraming salamat idol!
Awesome thanks for sharing
Thanks for watching!
Bangis master...
Stay safe po always..
Stay safe din po maraming salamat!
Idol apaka lupet mo po talaga mag restore
Good job! I like it.
I'm glad you like it
Bel lavoro 👌
Lo de la coco-cola y el papel aluminio lo encontré genial .👋👋
woww.. galing idol
Maraming salamat idol!
splendid!
Great video, helped me rebuild an old bike from my uncle, but the grips it has are super hard and painfull, what are he ones you used in the vid?
Thank you! It's rockbros grips
한국어 버전도 있으면 좋겠어요 항상 좋은영상!
고마워요 내 한국 친구!
@@CoggieBike 한국어 자막은 없나요?있으면 좋겠어요:)
I think that's exactly what my SR Suntour fork needs on my Giant Talon 2 (2017). I can't do it myself; looking for a bike mech who can execute the procedure.
Lots'a love, cheers, & Mabuhay, from tropical Philippines! #KeepBiking
Mabuhay! Maraming Salamat!
Amazing tutorial! Can I use a degreaser instead of paint thinner?
ganda ng music hehe
Very relaxing panuodin hHahahahaha
Sabayan mo sir ng kape habang naulan 😁
Can you do another review of the mountain peak monster cross?
Will do bro kapag nagkaoras mag long ride
im so relaxing to watch like this video thank you! 😊🙏
You're welcome 😊
Força chefão
Eto din ba ginagawa pag nag pa overhaul sa buke shop?
Sana ako na sunod na mapalad na marestore ang aking munting folding bike na keystone ares steel hehehe
Pero ok lang din kung di mapili hehehe
Suporta ako sayo sir
Napaka husay mo!🙏👍👏👏👏👏
Very satisfying video thank you ❤️
Glad you enjoyed it!
2 thing that you shouldnt do on rotor and brake pads, dont touch the surface. Oil (human oil) on your hands can contaminate it. Use sand paper to clean and make the surface even.
Thanks for the tip!
Or even rubbing alcohol. Or burning with it
nice bro.
Thanks
Hello!!! Good morning, I would like to know if you can help me, I have a MTB from the 90s. But I have a question, I don't know its size and I searched the internet and I haven't found anything. This is a 58 horizontal tube and a 43 vertical tube. Could you tell me what size this tube measurement is equivalent to? A greeting and thanks in advance.
Satisfying restoration 😌
Glad you like it!
Next time cruiser bike naman po
Dejas muy en segundo plano las suspenciones, comprendo que es para reducir costos, pero almenos buscar una forma de "rehacer" las barras debe de existir
Up!bisa ng mga videos nito
Salamat lods!
👏👏👏👏
Howdy coggie just a fyi when handling brake rotors wear clean rubber gloves because the oils on your skin can can contaminate them I've learned that the hard way by not being able to stop so now I wear gloves when changing rotors just my 2 cents but other then that great restoration as always
*_Meron ka bang video na sealed bearing hubs ang kasama sa pag.restore? Kung meron penge link. Kung wala paki sama sa future restoration. Thanks!_*
Hi sir. Question po. What type of spray paint ang gamit nyo? Thank you
Anong gamit nyo attachment sa Dremel po???? Pa indicate .po pls thanks
shopee.ph/40Pcs-Mini-Brush-Scouring-Pad-Abrasive-Wheel-Grinding-Polishing-Tools-i.283365748.4944287079
Sir question ano po ung gamit nyo sir na thinner? God bless po!
Generic paint thinner lang po na nabibili sa lahat ng hardware store
@@CoggieBike salamat po sa reply! thank you po for creating videos such as this! :)
This is an excellent choice ruclips.net/user/postUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L for those of you wanting an inexpensive alternative to what some would call a trendy purchase. I purchased this for my 62 year old father who is 6'4". He will fit this frame well with a slightly longer seat post. The frame and wheel construction are high quality. The brakes are marginal but you get what you pay for. My only complaint is the front fork dropouts which were misaligned on our specific fork. This made mounting the front tire difficult while aligning the brake rotor to caliper and front axle. Once the axle nuts were tightened down the misalignment issue was resolved.
Question ano ang ginagawa Ng preload puwede ba Yan ma adjust?
Sa play po ng pag bounce ng fork po, ina-adjust po yan depende sa weight ng rider...
@@CoggieBike Ah ok pero para saan Yung Plus tas Minus pag adjust?
you can buy on amazon is a orange crankpuller name is orange
I have a 2 different types of crank puller, you may look at my previous bike restorations as I used it. Unfortunately the crank has been stuck so strong and the crank thread has been loosed so I have no choice but to cut the spindle.
A blessed day Sir Coggie Bike, from Lipa City, Batangas po., meron akong ginagamit na MTB sa aking hanapbuhay. Pinili kong magbike araw araw upang makatipid sa aming pang araw araw na gastusin. Alam kong napakahalaga sa isang bike ng mga ganitong maintenance ngunit sapat lamang ang anking kinikita sa aming gastusin at medyo napapabayaan ko ang aking bike sa mga bagay na kailangan neto. Hangad ko na mapasailalim sa iyong free program na ito at umaasang isa sa mg amapalad na iyong mapili. Ang aking mtb ay aking nabili sa mababang halaga lamang sapagkat ito nga ay napatambak na lamang dahil sa pandemyang dumaan. Nagagamit ko naman ito ng maayos ngunit alam kong hindi tiyak ang aking seguridad. hindi ko alam ang sisimulan sa pagaayos nito at habang nagaaral patungkol dito mula sa mga video sa internet ay nadala ako sa iyong youtube page. Naway ibless ka pa lalo ni Lord dahil sa iyong mga mabubuting gawain. :D :)
may shopee/lazada link ka nung hanger alignment tool?
hindi na nag eexist ung item, search nio lang po Dropout alignment tool
Tanong lang po sa inyo ano po tawag sa parang hydrolic sa suntour fork ang sa lockout nagiba kasi akin at bibili sana sa shoppe or lazada pero di ko alam ano ang bibilhin
Sir ask lang ano po ba size ng shimano ball bearing sa cleats pedal po ?
Sir yung Trinx na Restore mo po ba dati alloy po ba yun or Steel
Steel po
anong tawag po sa sticker na nilagay nyo sa frame nyo po? at mayroon ba ito sa shopee or lazada.?
Wow
👍🏻👍🏻👍🏻👍🏻
Pogi
Maraming salamat idol!
Don't Use Coke Use Degreaser Not Coke But If You Want Remove The Rust You Must Be Using Rust Remover Not Coke
No... Rust remover like rust converter has too much chemical that will damage the fork stanchion
@@CoggieBike okay rust remover bad for that but using white vinegar not Coke
It is ok as long as you didn't soak it
idol! ano brand nung tools mo na parang drill?
Dremel po
17:46 18:08 don't apply grease
Boss anong grease yan blue gingamit mo
Lithium Grease po
Sayo ako na tuto mag ayos nga mga basic parts sa bike idol salamat
Esto no es una restauración esto es un mantenimiento general, que por lo visto no se hizo por mucho tiempo
Use 800 or 1,00 sandpaper on stantion sa fork for smooth performance rs
Boss pano mo naaalis yung grasa sa micro fiber cloth?
Degreaser po
Boss saan po location mo? Baka pwde magpa align ng rd hanger, bumaliko kasi sa bike ko ☺️
Sir ano size ball bearing sa loob ng freehub
3mm po sir
@@CoggieBike thank you sir
Ok lang po ba pang repack yung multipurpose grease ng caltex
opo
dog part soooooo op
Anong grease po gamit ninyo
Synthetic Lithium po
@@CoggieBike anong brand po
Ano gamit mong grease boss
eto boss
shopee.ph/Medex-HP-High-Temperature-Synthetic-Grease-500g-i.287304798.13315423239
next bike is... cobra?
Nasa mag Kano naman po pag nag pa restoration Ka Ng bike pero frame nàlng magagamit
Bakit po kailangan lagyan Ng grasa ung seat post?
alloy to alloy contact at metal to metal contact need lagyan ng grasa...
Tama si coggie bike para iwas ito sa pag stuck up nang seatpost
May nabibili pa kaya na ganyang rd?
Wala na atang brand new nyan sir phase out na, parang ung mga lumang shimano, alam mong fake kasi phase out na eh
@@CoggieBike sayang puro peke na kase nabibili ngayon e hirap na maghanap ng orig
Too much grease make the bike perform not well kaya kunti lang po grasa gamitin at not all bike parts lagyan mo ng grasa especially the shifter cable kasi macontaminated lang ang grass it is better to use oil to shift well rs always lods
there's trick to realese stuck crank.
than you cut it, you better just hit the axle with a hammer 😂
release the left lock, then hit the axle with a hammer, then it will be released, because the crank will be caught by the right BB lock
Genius! but no
Wait guy, coke??
Yes
Next time clean dirt and rust from the caps of the hex bolts bro. You clean and grease everything and left the rust on it.
magkano po ba usually ang pa overhaul ng bike? salamat