A lot of you guys wondering again how I fit 1 1/8 steering tube to the frame. The frame has a 34mm headtube, and your eye has been tricked by the 1 1/8 thread type fork of this bike. Not all thread type fork has a standard size so NO HEADTUBE CONVERSION happened here. You may see the image link below with regards to the size of the old thread type fork I replaced. imgur.com/a/3zKl9r4
Every bike you restore, turns into a moving work of Art! You sir, is a master of bike restoration. Passion is everything. Swerte ng owner 😁 Kudos sir Coggie
Maraming maraming salamat coggie bike napakaganda ng restoration nyo, nagkaroon muli ng buhay ang GT avalance na ilang taon na nakatambak. Maraming salamat at pagpalain po kayo palagi
Wala akong alam sa pag aayos ng bike Kaya ung ginagamit Kong bike Hanggang ngaun panget parin wala din kasing budget.. watching your videos is really mesmerizing.. Ang Ganda ng mga outcome 👍👏
Yun oh... salute sayo sir... isa lang napuna ko... maganda na sana lahat sa brake lang talaga medjo off... ganda na ng setup eh... sana hydraulic brake na inilagay niu po... pero all goods naman all in all...
always satisfying restoration I myself is restoring my bike but unfortunately, i haven't finished it yet because of no budget and I left it in the province. But planning to continue it when I got home and have enough budget
Complimenti! Un lavoro pulito e impeccabile.ottimi abbinamenti di colori e fantastici componenti,fanno questa mtb un pezzo unico.ogni volta che vedo rinascere vecchie bike con questi risultati sono contento che ci sia passione per quello che a me piace.un vero piacere vedere questo video.Grazie di tutto questo.👍
Loved the rebuild. Always impressed with the mods you do with limited resources. Great creativity and execution. Not sure what made this a gravel bike other than the handlebars. But it looks amazing! Really enjoying your channel and learning a lot. Thank you!
Just a few random bike building tips When it comes to threading anything, it can not hurt to finger tighten it first before you use anything that gives leverage or any electric tool When finger tightening, especially on very fine threads, or soft metals. Don't directly screw it in, do the opposite until you feel it fall into place, and then start finger tightening it. It'll help make sure you do not cross thread Also, I have never used ltwoo. How are they? Do they compare to anything sensah or shimano? Also pt2, very minor. When you put the QR skewers on, especially with disc wheelsets. I like to have the lever part of the skewer on the same side as the disc rotor so then it matches the side it is on, front and rear. But overall, very good job, keep it up! :)
@@noburt9 Well mostly i think depends on the usage, since I seen people broke their LTWOO derailleurs either shifters because the quality is just some kind of durable plastic and steel or alloy, but stick to Shimano if you are overwhelming over drivetrain components, But any of that, for me is good, just few quick adjustments and you are done,
ang galing nyo po talaga idol sana may ganyan din akong talento subscriber po ako since bago mag 20k subs at grabe mangha mangha padin po ako sainyo idol
Sana next time yung akin namang bike mapili para sa next restoration mo idol. Sumali ako nung giveaway mo sa kasamaang palad hindi nga lang pinalad hehe continuing to support Coggie bike 🥰
Apaka solid talaga idol bagong sub. Mko pero dami kona nanood sa vidoe mo kasi me gusto ko mag ka bike kaso kulang sa budget kaya frame muna unuuna ko at nanonood ako ng mga ginagawa mo nakaka kuha ako ng idea kong ano pwd or i upgrade ko pag nag ka roon ako ng bike😊
Since the owner doesn't want to give the name(been seeing a lot of comments like this here and in the other videos) I'll be the one to give it instead surly corner handlebars. Found it in the other comments. I've been wanting to know it too.
Sir ask lang po paran hindi po non tapered yung sealed bearings na headset na ginamit nyo. May I know po what kind of sealed bearing headset ang ginamit nyo at anong size?
Since the owner doesn't want to give the name(been seeing a lot of comments like this here and in the other videos) I'll be the one to give it instead surly corner handlebars. Found it in the other comments. I've been wanting to know it too.
How can i reach you out sir? I have a friend who have and old full suspension bike the fork was still rigid because as what i had said it is an old bike and it is very valuable to him with the memories he had riding it. He even climbed baguio with and heavy gearing and very rusty components and im really hoping that you could help him to restore his bike and put a fuel on his burning passion on cycling.
![GT Avalanche Bike Restoration [REUPLOADED No Music 4K 60fps]](http://i.ytimg.com/vi/XBdDsokR0zE/mqdefault.jpg)
![Restoration - GT KARAKORAM 3.0 95% (NO REPAINT) BIKE RESTORATION & OVERHAUL + TIPS [4K]](http://i.ytimg.com/vi/ZcEIbX-33Mg/mqdefault.jpg)
A lot of you guys wondering again how I fit 1 1/8 steering tube to the frame. The frame has a 34mm headtube, and your eye has been tricked by the 1 1/8 thread type fork of this bike. Not all thread type fork has a standard size so NO HEADTUBE CONVERSION happened here. You may see the image link below with regards to the size of the old thread type fork I replaced.
imgur.com/a/3zKl9r4
Ayyye haha in reference sa nakita ko na gt avalanche video na upload ni boss coggie 🤣
Bro tum kis state sa ho
Muja bhi apni bicycle restorations kar vani ha but free please I am in delhi
How I wish you can customize my bike but still I don't have a budget for that , but I love your all videos 💕💕
@@danfrancisco6018You're just stupid, deal with it, or read thousands of books.👌🐌
Thank God you got it for free cause there are people who are asking $100-$300 for that bike alone!
Every bike you restore, turns into a moving work of Art! You sir, is a master of bike restoration. Passion is everything. Swerte ng owner 😁 Kudos sir Coggie
Maraming maraming salamat coggie bike napakaganda ng restoration nyo, nagkaroon muli ng buhay ang GT avalance na ilang taon na nakatambak. Maraming salamat at pagpalain po kayo palagi
Salamat din sayo bro
May GT na naka tambay dito sa bike rack sa apartment namin, sarap ipa restore matapos manood nito. It's very inspiring sir. Super!👌🏼
One of the most satisfying restoration I've watched. GT Brand Fan here!
Wala akong alam sa pag aayos ng bike Kaya ung ginagamit Kong bike Hanggang ngaun panget parin wala din kasing budget.. watching your videos is really mesmerizing.. Ang Ganda ng mga outcome 👍👏
Maraming salamat po sa panonood!
Lucky person who gets that bike nice work
I have the all terra 3.0. How I wish you can work on my bike. All your restorations are a masterpiece!
I really like this one. Hadn’t seen bondonused to make welds look cleaner how? So smart only seen it used to foot little chips and stuff. Clean
I haven't perfected the welding and I tried using epoxies to make it look smooth
Yun oh... salute sayo sir... isa lang napuna ko... maganda na sana lahat sa brake lang talaga medjo off... ganda na ng setup eh... sana hydraulic brake na inilagay niu po... pero all goods naman all in all...
Your attention to the prep work is impressive.
Thank you!!!
always satisfying restoration I myself is restoring my bike but unfortunately, i haven't finished it yet because of no budget and I left it in the province. But planning to continue it when I got home and have enough budget
Complimenti! Un lavoro pulito e impeccabile.ottimi abbinamenti di colori e fantastici componenti,fanno questa mtb un pezzo unico.ogni volta che vedo rinascere vecchie bike con questi risultati sono contento che ci sia passione per quello che a me piace.un vero piacere vedere questo video.Grazie di tutto questo.👍
This GT Avalanche became one of my favorite classic bike since previous GT Avalanche video
Thanks!
I had gt bike but not avalanche, its gt aggressor 3.0 (2003) xc bike and its a great bike
sorry to piss on your parade this is just a fake gt its not even a fckin gt bike
Ponkan na ponkan! Ganda, Sir!
Panira lang yung Ltwoo. kahit Alivio lang sana.
Sana sakin naman next! Huhu
Loved the rebuild. Always impressed with the mods you do with limited resources. Great creativity and execution. Not sure what made this a gravel bike other than the handlebars. But it looks amazing! Really enjoying your channel and learning a lot. Thank you!
Really loving the colour combinations. Bike came out looking absolutely amazing.
Great restoration.. one thing i would have done differently, i would also mount the gear shift cable next to the rear brake cable along the top tube
Tamang nood lang habang patulog na. Like SHEEESSHHH Solid🔥
Salam dari indo bang. Saya sdh nunggu2 konten sepeda jadul nya akhir nya ada jg
23:38 you glued the cable guide. How are they holding up, okay? Do not fall off, do not peel off over time?
It's adhesive bro, risk cable guides has it
@@CoggieBike thank you for response! bro i know they have glue. I'm not sure if it holds the guide firmly enough that it won't come off.
You are a legend of restoration you are amazing restorer go ahead like this and we and I are always with you thankyou coggie
From preparations to finished product 👌. Napaka-solid sir!! 🙌
Ang ganda at ang galing! GT Avalanche din ako dati!
Just a few random bike building tips
When it comes to threading anything, it can not hurt to finger tighten it first before you use anything that gives leverage or any electric tool
When finger tightening, especially on very fine threads, or soft metals. Don't directly screw it in, do the opposite until you feel it fall into place, and then start finger tightening it. It'll help make sure you do not cross thread
Also, I have never used ltwoo. How are they? Do they compare to anything sensah or shimano?
Also pt2, very minor. When you put the QR skewers on, especially with disc wheelsets. I like to have the lever part of the skewer on the same side as the disc rotor so then it matches the side it is on, front and rear.
But overall, very good job, keep it up! :)
Thanks for the tip men.
Actually LTWOO user here, they are good crisp shifting, since Sram's factory in China shut down, the CEO of the factory invent his own bike parts,
@@nzo_6543 great to hear, is it durable too? I tend to neglect my bike parts. Also, doesn't sensah have a similar story. Made of ex sram engineers?
@@noburt9 Well mostly i think depends on the usage, since I seen people broke their LTWOO derailleurs either shifters because the quality is just some kind of durable plastic and steel or alloy, but stick to Shimano if you are overwhelming over drivetrain components, But any of that, for me is good, just few quick adjustments and you are done,
@@noburt9 Maybe, because I just ever heard of Sensah before,
Ang ganda ng stock parts niya before the restoration, deore dx groupset then naka rare na sakae sharktooth pedals from 1990
Coggie going hard on these GT Avalanches 🍊🔥
I hope my old bike look like this🥺🥺🥺btw congrats for another satisfying restoration 🤗🤗💕💕
You can do it!
Awesome looking bike! Can't beat the triple triangle!! Love GT!!!
You and me both!
WOW. What a transformation. WELL DONE.
Thank you!
Lovely stuff. Avalanche bikes get much love these days :-)
Couldn't agree more!
ang galing nyo po talaga gumawa ng bike
Salamat po!
Galing naman po gumawa ng bike hehe sana ako den soon maaayos bike ko.☹️
Ganda talaga as always color scheme lods🤩, cant wait for the next vid🥳
Very soon!
Angas na naman ng restoration 🔥
Thank you!
Ahhhhh!! Another 1🔥🔥 great build my idol coggie
Thanks!
Present kaso late HAHAHAH ayos ganda ng bike🤘🏻
Salamat idol
Awesome restoration as always!!!
Thanks!!!
Magistral bro. Very good job
Thank you so much 😀
Frame colour combination is next level i love 😍 ❤
Thanks!!!
@@CoggieBike please make video on 'how to repaint old bicycle frame' ❤🙏
ang galing nyo po talaga idol sana may ganyan din akong talento subscriber po ako since bago mag 20k subs at grabe mangha mangha padin po ako sainyo idol
Keep watching idol maraming salamat!
Incrível trabalho . isto é uma bicicletária de verdade um bicicleteiro de raiz ,,, parabéns
Obrigada!
Excelente trabajo amigo, acabo de restaurar una bici que herede, no tan bien como vos pero quedo jaja
Love the combination colours, pretty looks man 😍
Thanks!!!
Sana next time yung akin namang bike mapili para sa next restoration mo idol. Sumali ako nung giveaway mo sa kasamaang palad hindi nga lang pinalad hehe continuing to support Coggie bike 🥰
great work! I really enjoy your videos.
Thank you!
astig nito idol ganda tlga na chromo gt
I like it. good job. Nice preparations.
Glad you liked it
Super man i loved it, you should come to Mozambique e do a rebuild
I would love too :)
Filipinos know their bikes! As a kid there, I saw bikes everywhere. In America, I hardly see bicyclists.
13:30 Are these epoxy spray paint?
Where can I buy ragusa gravel handles overseas?
Nice build. But some advice. The sleeve aluminum on seat post steel and aluminum don’t mix anti seize grease on it.
Nice revamp coggie i have a avalanche 2.0 to restore also.
Eto ung hinihintay ko
Master piece❤️
Thank you!
Apaka solid talaga idol bagong sub. Mko pero dami kona nanood sa vidoe mo kasi me gusto ko mag ka bike kaso kulang sa budget kaya frame muna unuuna ko at nanonood ako ng mga ginagawa mo nakaka kuha ako ng idea kong ano pwd or i upgrade ko pag nag ka roon ako ng bike😊
This looks boss .well done
Thanks bro!
baka coggie yan. astig talaga
Salamat po!
New subscriber here sir! Im amazed how you restore those bike! Gusto ko rin ipa restore tong bike ko, kung malapit lang sana kayo😅
Better than new! I like it!
Thank you!
Love the bike!
Galeeeng talaga lodi superr
Amazing work always wow 😃😯
Thank you so much 😀
No you thanks
Sir Eid Mubarak love from Pakistan
Great handle bar. Might I ask what kind that is?
Since the owner doesn't want to give the name(been seeing a lot of comments like this here and in the other videos) I'll be the one to give it instead surly corner handlebars. Found it in the other comments. I've been wanting to know it too.
Awesome 👍 thanks
Thank you too!
Wow...the combination of orange,gray and black make the bike beautiful...nice bike congrats🔥💥
Thanks bro!
Sir ask lang po paran hindi po non tapered yung sealed bearings na headset na ginamit nyo. May I know po what kind of sealed bearing headset ang ginamit nyo at anong size?
Hey bro! What is the blue bearing grease called?
Everything about doing a RAW steel style?
Класс. А где взяли наклейки "GT" и "Avalanche"?
Hi Coggie,
is there a list of which products you use, for example primer, paint and paint remover?
Is there a specific brand that you can recommend?
Any paint stripper
Where did you get the bar from? It looks the surly corner bar. Is it possible to get it to the states too?
Fox del chino jajaja ohhh god, true art !!
GANDA😍😍
super nice bike!!!!
Sure is!
в натуре чотко.! вторую жизнь дал велику
the number one!!
Guapisoma yo tengo una GT avalancha comp de 29 de 2022 y esa esta me gusta más 😎🤘
Nice job dude! What year was that frame and tell me more about those handlebars! thx
Ganda idol ❤️
Wow beautiful
Thank you!
1:52 What is the spray called and how much is it in the Philippine currency
thats WD40, accessible all over the world. cost 250php
@@CoggieBike is it accessible on any hardware stores? Thanks for the response btw!
ano tawag dun sa black na kinakabit sa cable n prng housing pero mas manipis??
Cable sleeves po
What kind of handle bar did you use??
Since the owner doesn't want to give the name(been seeing a lot of comments like this here and in the other videos) I'll be the one to give it instead surly corner handlebars. Found it in the other comments. I've been wanting to know it too.
I already. have 2 bikes but this bike looks awesome I would love to have that one as well
Right on!
amazing!
Thanks!
What size did you use for your head set bearings
A sram axs build would be cool in the future
So so so beautiful
oh ryt new bike gt nnmn😍 2nd
Yes 😊
Nice Job !
Thank you so much!!
Boss Anong max size wheelset kaysa dyan? Meron me avalanche 2.0 26r
26er po sir
22:56 ano size adpator? San makabili nyan? 55mm sinukat ko sa frame ko
Sir galing mga gawa mo. Sir ang tawag sa handle bar mo o kaya ano brand po? Gisto ko din yan para sa road bike ko.
Sir anong tawag sa handlebars mo?
Corner bars po
@@CoggieBike salamat sir. San po pwedeng mag order online sir? Sa ibang bansa ako ngayon hirap maka hanap. Galing nyo po sir.
How can i reach you out sir? I have a friend who have and old full suspension bike the fork was still rigid because as what i had said it is an old bike and it is very valuable to him with the memories he had riding it. He even climbed baguio with and heavy gearing and very rusty components and im really hoping that you could help him to restore his bike and put a fuel on his burning passion on cycling.
Message me @ facebook.com/coggiebike
super 🔥🔥🔥
nice work
Cool Color Scheme
Thanks!!!
Nice bike☺️ i want that bike
I want to know the type of handlebar you are using. I am very interested in the handlebar of such a model. is there a store source?
Corner bar