This is the Video I needed to see… After I got the System going” well they got it going, It was over $300.00 For the battery… so he was Right I would need A Different Box to get the best out of the New 12S he trying to sell me… This T1500 Rockford Fosgate” Amp should be more than enough to push these Rockford Fosgate P3’s… I dont want to buy anymore of this stuff…Nice Vid….🥴
You getting any popping noises I got 2 12s in dual 4 ohm in a prefab box that is a little small n pushing 2300rms to a pair of the new 800 rms but they are popping from time to time in my truck I got a set of Jl audio c3 components getting 200rms each speaker n over powering those as well
You may need to put the 12's if they are T1's in a custom box at around 5 cubic feet. They need room to move air a box that is too small can cause bottom out issues for the subs because the T1 12's are over sized 12's.
Not bad brother the T1s are good woofers they always have been and are actually under rated woofers btw. Ppl don't realize it they see the RMS and think 🤔 they ain't crazy powerful subs but in reality their real RMS is around 1500 RMS a pop... I got em as well but I haven't ran any of my T1s and T0S in a long time. I run my T2 15" D2s more than anything now their on a completely different level. I love em I got the 1st gen T2 15"s D2s and just running one as my daily ATM and it's absolutely incredible. It's on a Taramps HD3000.1 it gets Lil over 3k daily. Have you thought about the T2 subs next??.. it's a big big difference man the T1s are amazing but the T2s are a completely diff demon.
Working on the new video took a long time for the damn signal processor to come in the mail from covid restrictions and supply chain issues all over the country. Got the new setup installed and testing Video will come soon aiming for this weekend. Thanks.
When you have a radio like pioneer you should NEVER HAVE LOUDNESS OR BASS BOST ON AND IT SHOULD BE FLAT UNLESS YOU HAVE A DSP WHICH YOU GOTTA USE IT WITH A VERY EXPENSIVE MICROPHONE N DO IT CORRECTLY
@@evan.norwalkcalifornia562 No my dealer at the time I guess he was doing a sale where he included the knob with the amp for a limited time. I think the only way to get them now is online at rockford fosgates website.
I got the T1D212's instead of the T1D412's you flip the fuses on them to 4 ohm and the amp runs them at 2 ohm which lessens the amperage draw on your battery and reduces the heat generated by the amp. The nice thing about the T1500 is it runs both 1 and 2 ohm at 1900 watts so you don't lose power when running at 2 ohm. As you know the higher the ohms the less watts usually. Rockford makes great equipment man.
@@Tycoon8425 why did you flip to 4ohm rather than leave it on 1ohm? No knocking I'm trying to trouble shoot an issue I have going on here. I have mine wired in parallel an had smoke come out but immediately pulled the subs an everything was cold to the touch.... what are your thoughts???
No I could not take my dash out I had to install my Fix 86 under my subwoofers in the spare tire area. The door speakers are already pre wired so I ran the wire through to the new amp from where the defaults were.
@@Tycoon8425 Nice I have a 12 Hyundai Sonata and can't change the radio. I used an Audiocontrol d-6.1200 with Rockford T2652-S Components up front with the tweeters active and Rockford T1-1650 Coaxial in back so using all 6ch @4ohm 125 watts and 1x T1D2-12 with Rockford P1000x1bd @1ohm rated 1551 watts and my T1 @ 1ohm is taking all that like a champ.
I am doing a change to my system in the next week or so depending on how long parts take to ship to me. I will make a new video on the updates. Still OEM deck.
The T750 is better in the fact that it is smaller and can power the subs just as well. The fact that I could fit the amp in a small compartment worked out very well for me.
No big 3 upgrade added an additional lead AGM battery in the back and isolated it from my cars electrical system so no drain on my alternator and main battery.
This is the Video I needed to see… After I got the System going” well they got it going, It was over $300.00 For the battery… so he was Right I would need A Different Box to get the best out of the New 12S he trying to sell me… This T1500 Rockford Fosgate” Amp should be more than enough to push these Rockford Fosgate P3’s… I dont want to buy anymore of this stuff…Nice Vid….🥴
It’s nice wish he would of turned the bass knob all the way just to see what it can do
You getting any popping noises I got 2 12s in dual 4 ohm in a prefab box that is a little small n pushing 2300rms to a pair of the new 800 rms but they are popping from time to time in my truck I got a set of Jl audio c3 components getting 200rms each speaker n over powering those as well
You may need to put the 12's if they are T1's in a custom box at around 5 cubic feet. They need room to move air a box that is too small can cause bottom out issues for the subs because the T1 12's are over sized 12's.
Try the lc7 for the radio
Not bad brother the T1s are good woofers they always have been and are actually under rated woofers btw. Ppl don't realize it they see the RMS and think 🤔 they ain't crazy powerful subs but in reality their real RMS is around 1500 RMS a pop... I got em as well but I haven't ran any of my T1s and T0S in a long time. I run my T2 15" D2s more than anything now their on a completely different level. I love em I got the 1st gen T2 15"s D2s and just running one as my daily ATM and it's absolutely incredible. It's on a Taramps HD3000.1 it gets Lil over 3k daily. Have you thought about the T2 subs next??.. it's a big big difference man the T1s are amazing but the T2s are a completely diff demon.
I know most rockford equipment is underrated I am looking into T2 16 but they are beasts may not have enough space for 2
Working on the new video took a long time for the damn signal processor to come in the mail from covid restrictions and supply chain issues all over the country. Got the new setup installed and testing Video will come soon aiming for this weekend. Thanks.
How did you tune your amp? I use a t1500.1bdcp per t1d212 each wired at 1ohm these subs can take abuse 1000000%
@@robertfarley9437 I tuned my T1500 to 2ohm to save amperage and reduce heat I still get 1900 watts at 2 ohm on the T1500 it is a beast.
Man I'm in process of putting same amp n speakers in my 89 camaro iroc
When you have a radio like pioneer you should NEVER HAVE LOUDNESS OR BASS BOST ON AND IT SHOULD BE FLAT UNLESS YOU HAVE A DSP WHICH YOU GOTTA USE IT WITH A VERY EXPENSIVE MICROPHONE N DO IT CORRECTLY
You can have a stand alone head unit separate from your vehicles stock system
🗣Were did u get the punch bass nob ?
It was included in my package when I purchased the Punch 1000 amp in my old videos from my punch setup.
@@Tycoon8425 did u get it online...or in store?
@@evan.norwalkcalifornia562 No my dealer at the time I guess he was doing a sale where he included the knob with the amp for a limited time. I think the only way to get them now is online at rockford fosgates website.
How did you run 2-d2 at 2 ohms?
I got the T1D212's instead of the T1D412's you flip the fuses on them to 4 ohm and the amp runs them at 2 ohm which lessens the amperage draw on your battery and reduces the heat generated by the amp. The nice thing about the T1500 is it runs both 1 and 2 ohm at 1900 watts so you don't lose power when running at 2 ohm. As you know the higher the ohms the less watts usually. Rockford makes great equipment man.
@@Tycoon8425 why did you flip to 4ohm rather than leave it on 1ohm? No knocking I'm trying to trouble shoot an issue I have going on here. I have mine wired in parallel an had smoke come out but immediately pulled the subs an everything was cold to the touch.... what are your thoughts???
@@liljoe427cummins You made .5 ohms. Probably fried your amp or subs.
Need to work on that cable management. That looks like shit. Them subs fucking bang though.
what digital processor did you get can you show me a link?
I used the JL fix 86 I don't have a link.
@@Tycoon8425 how did you get your signal or where able to take your dash out ? And did you run new wire to your door speakers?
No I could not take my dash out I had to install my Fix 86 under my subwoofers in the spare tire area. The door speakers are already pre wired so I ran the wire through to the new amp from where the defaults were.
@@Tycoon8425 Nice I have a 12 Hyundai Sonata and can't change the radio. I used an Audiocontrol d-6.1200 with Rockford T2652-S Components up front with the tweeters active and Rockford T1-1650 Coaxial in back so using all 6ch @4ohm 125 watts and 1x T1D2-12 with Rockford P1000x1bd @1ohm rated 1551 watts and my T1 @ 1ohm is taking all that like a champ.
Where you get that bass knob?
The knob comes with the fix 86 signal processor when you buy it.
Bro make more videos this was great. And talk more about you oem integration that’s a big topic
I am doing a change to my system in the next week or so depending on how long parts take to ship to me. I will make a new video on the updates. Still OEM deck.
Any updates ?
Did you like the t750.1 better then the p1000
The T750 is better in the fact that it is smaller and can power the subs just as well. The fact that I could fit the amp in a small compartment worked out very well for me.
I’m going to put one on a Rockford t1 d2
@@r.osborne1189 yeah the t750 puts out close to 1000 watts at 1 and 2 ohm man it will be perfect for one T1D2-12 at 800 watts.
Did you upgrade the starter battery or its still stock and any big three upgrade?
No big 3 upgrade added an additional lead AGM battery in the back and isolated it from my cars electrical system so no drain on my alternator and main battery.
@@Tycoon8425 you really need to do the big 3 with that power. You have to make power to have power.
How are you