Ford Ranger Ford Everest Mazda BT50 interior door handle replacement.

Ford Ranger Ford Everest Mazda BT50 interior door handle replacement. Part cost is about $50 Australian from Ford and after market options online for $20-$30.

[@Jarr0d]

Mate, this is perfect. I've had a replacement handle sitting in the shed for ages and never got around to swapping them. Thanks!

[@raymond6632]

Fantastic, Ford charged me $100 for the door handle today and will cost around $150 to install, the service guy started telling me how intricate and difficult it was to change out, especially the spring!!
Thanks, I'll be doing it myself 👌🏼✌🏽👍🏼👊🏼

[@ricktay9337]

Thanks to this Video, I just did it on my T6 Wildtrak driver's side front door inner handle.
For Wildtrak my recommendation are :
1. Did it at bright environment and spacious space, its hard to see if theres no visible light.
2. Better with a friend to help to hold as the Wildtrak's door panel is heavier than this model in this video, and theres 2 more extra wiring for the ambient light which is really hard to take off, its also safer with a friend to hold panel close to the door to avoid stretching those wiring. Also that I screw up with my auto up down power windows button, maybe due to strecthing those wiring too hard and maybe the connector is loose.
3. Avoid using your plastic trimer tools or pulling too hard near the space between the speaker and door handle as it may snap your ambient fiber, I snapped mine, although it still has light after its snapped but its not perfect anymore.
4. When putting on the panel after done changing door handle, try to align clips with your finger in to make sure it aligns to the hole to avoid bending those clips.
5. Prepare all the tools before you start, this is the first time I did something like this and it tooks me more than 90 minutes to fully settle due to low light and limited space.
6. Tools needed are '+' shaped screw driver, T20 screw driver, 1 plastic trimer, and most importantly 1 bended with tiny '-' head (for wiring connector).
Hope this helps.

[@creativoguatemala9002]

thanks!!!

[@peteranderson1434]

Just replaced my 2017 Everest drivers door handle using the video by Killa Watt. Followed it verbatim and everything went perfectly and without a hitch. (I even went out and purchased the trim removal kit). This video is very well explained and not rushed through with detailed step by step instructions. FYI, the OEM handles range today between $80 - $110. Thanks again and keep up the great work producing these.

[@richardwakeley2192]

Thank you for putting up this video. I have replaced a broken inner door handle on my Ranger XLT. Would never have attempted it alone without your advice. I used a couple of chairs to rest the panel on while disconnecting and reconnecting the wire and plugs.

[@waterside13]

Thank you, great instructions. Need to do passenger front door lever in the near future. The silver plastic lever cover is falling away.

[@user-yz6in4uf2w]

Mate awesome little vid, was a bit worried about how much force to use on door trims and card removal. Great step by step process!
Thanks Dean

[@geoffdyball8642]

Thanks so much for uploading. It saved me an unknown amount of hours and additional broken parts 😅 You’re video was perfect!

[@johngreen3292]

This video is perfect, my Ranger handle has just come apart in my hand and this video has given me the knowledge I need to replace it . Thank you for a very informative video.

[@orlandomah1186]

Thanks a lot, your instructions helped me to replace one without any hassle

[@venturingfour]

Great Vid! Always easy to follow instructions. Thanks 😊

[@flakybandit1025]

Brilliant. Just followed step by step to replace handle on my Ranger Wildtrak. Perfect! Thank you 😊

[@chris_toe_fur]

Great video. Really thorough and super helpful! Thanks!!

[@user-yv6vm8mc6s]

Thanks Buddy. Would not have gotten the job done without you.

[@juancarlosjimenez4265]

Thanks a Lot for all your explain. Very clear and help me a lot. I Made same change with your guide.

[@killawattgarage]

Glad to help

[@jordandaly4754]

Used this tonight appreciate the video mate

[@mohdaziz9416]

Thank you for sharing this knowledge. You save my day and my pocket sir. My six year old sleeping inside my ranger tonight and when we arrived home she accidently pull off the inner handle.. and start to crying...she feel so sorry and still with sleepy face . Im going crazy looking the broken handle so im calling the sparepart shop near town and already closed cuz of night time.. thanks for the good video sharing..THANKFULL

[@killawattgarage]

Glad to help

[@Fungula]

Thanks for the vid bruz. Worked great. My little black o ring around the clip on the speaker was missing too. Maybe like that from the factory.

[@petemilliet9694]

Good job man... you're the 1st place I come to when working on my Ranger.

[@killawattgarage]

Wow, thanks

[@xr2daz]

Ledgend saved me a few hours looking for sneaky screws. Job done in 20 mins

[@mtbman5407]

Thank you! Watching from the Phil.😊

[@tommylyew3219]

Thanks much for this . Now i can change the left door handle on my 2015 Ranger.

[@szymonkoronczewski4224]

Thanks for posting. It's the best video I've watched on pulling something apart! Very clear instructions. Much appreciated.

[@killawattgarage]

Glad it helped!

[@adamrosser5221]

Hi mate, excellent video, just successfully changed handle in 2017 Everest. Cheers

[@hermanbam7083]

Thank you so much! Super easy DIY after I watched the video!

[@davrynbotha4795]

Thank you….followed your tutorial to change my handle and made it so easy🙏🏻🙏🏻🙏🏻 and no clips broken 😀

[@killawattgarage]

Glad it helped!

[@paulpengelly1859]

Great instructional video, clear and concise...!

[@killawattgarage]

cheers

[@henriquelopes933]

Very good! congratulations!!!

[@shaner403]

Thanks mate! Super helpful!

[@user-rb2zb3kt4v]

Awesome video mate. Helped me out alot replacing my rangers door handle.
Thanks again👍👍

[@killawattgarage]

Great to hear!

[@daywalkerx4493]

very helpful video. will try this with my ford everest. thanks!

[@bradal77]

Thanks so much. Ford told me easy fix haha lucky you were there to save us. Great video easy to follow 😊

[@killawattgarage]

Great to hear!

[@Cryptothebone]

Oh man so perfect walkthrough. I love it. Thank you very much

[@killawattgarage]

Glad you enjoyed it!

[@user-nt2iy8vj5v]

Great job, very efficient. THANKS

[@ahmiellesalazar2623]

Nice one very detailed. I hope I can change mine too without any problem.

[@FrancoisJacobs-if1pu]

Thank you for the video. It took me less than 30 minutes thanks to your video.

[@killawattgarage]

Glad it helped!

[@bufallobill9052]

Another helpful video mate... anyway, can you also do a video on how to clean the turbo on a 3.2 ranger wildtrak 2017 model.... cheers...

[@moiramuga5707]

Thanks very helpful and accurate

[@iskandarkhamis]

Thanks for this man. 👍

[@shanebrownhere]

Bloody legend mate!! 👍

[@shaneallen4042]

Thanks mate very helpful.

[@killawattgarage]

No problem 👍

[@TokNan_P14A]

Tq for the vid. Very helpfull

[@vilanovasbar]

Excelente!!!! Ajudou muito. Obrigado

[@xjoy2487]

Hey mate do you have a video in replacing the exterior handle? Px2 ranger

[@owenboyd8817]

Hey I've got a 2017 BT50 will all the silver trim pieces from all four doors pop off the eame way as this? They all need replacing. Also the silver trim pieces on the centre console next ro where my knee sits? Cheers mate

[@dondonlopez1013]

Thank you sir for the great tutorial..god bless

[@killawattgarage]

thanks

[@sahimspencer6473]

I did a bt50 yesterday, it's the same excluding, no need to pull off the silver trim, screw in the rectangle handle hold, due to the shape of the bt50 mold, you have to drill out the plastic rivets to get to the black pin, I just used a hot glue gun to reglue.

[@marcelocabellosstrange5915]

Buenísimo, gracias.

[@kittykitty7063]

ขอบพระคุณมาก เพิ่งเปลี่ยนเสร็จครับ

[@WillemLuntungan]

Thank you

[@smilecow131]

Thank you so much

[@johnlewis6056]

Excellent video mate thanks. Got the same issue on my 2012 and mrs 2019.
Do you know if they make a heavy duty or solid chrome plated metal handle that won’t peel?

[@killawattgarage]

thanks for the comment. I haven't yet seen an better quality handle at there.

[@johnlewis6056]

Mate just replaced both front door handles. 20 min each. Too easy when you know what you’re doing. Thanks.

[@killawattgarage]

@@johnlewis6056 glad it helped. Cheers

[@tomdixon9803]

Thank you mate! Owe you a beer.

[@killawattgarage]

No worries! Glad it helped!

[@calebjones7769]

Awesome

[@miguelferdinando]

Muy didáctico y bien explicado,aunque tengo conocimiento básico de inglés,el solo verlo se entiende,tengo la misma camioneta motor 3.2 al parecer se dañó el motor del levanta cristal,ya lo repare una vez pero la camioneta ya tiene 10años y el lado conductor es la que más uso para bajar y subir el cristal,lastima no llego al motor eléctrico,de todas maneras es muy didáctico

[@killawattgarage]

Thank you

[@johnlerybernas2379]

Thank you sir the idea

[@killawattgarage]

Most welcome

[@jonmiles6036]

Do you know the part numbers by chance? Ford in the US wants to sell the entire piece and not just the handle

[@ismaelsarmiento5447]

U have a link to buy the piece?

[@killawattgarage]

brought it from the ford dealer

[@kelvinferguson5789]

Hi mate, where did you purchase door handles from ? Ford want to charge $100 for 1! 🤦🏻‍♂️

[@jsmith7183]

Excellent. Thanks for efforts. Was thinking my Rangers interior door handles were made of solid satin brass, but lo and behold found out to my dismay its Chinesium.

[@cameronmilligan827]

Jeez what a F'around... just got my handles today and watched this vid, now I'm thinking I should of just left it

[@IG-md3lg]

Thanks for posting this. Was able to fix our handle without needing to pay huge fees. Much appreciated 👍