You're just awesome, mate. Great job. I especially like how you don't over hype your videos and carry on like a super excited school kid. Thank you for sharing your knowledge.
woow you are pro i was always wondering how to wrap door handles, i know im not good as you butt i pick up some thricks that you provide and i can make my car a little bit fire ;) keep up good work
Great video. thank you. I would like to know while doing the door, should I remove the door handles, or just go around it. Do the seams collect the debris and become visible over time?
Hi i really appreciate the effort. I would like to see if its possible to do ppf on 2nd piece of door handle. Only then it would be complete. Just wanna know whether it can be done without any release cut
Thank you for this. I'm doing a full wrap on a Toyota Tacoma TRD Pro. The letters are molded (punched) in to the tailgate and bedsides. How would you handle that? Heat the film and stretch it in the the recesses of the letters? It's pretty intricate/detailed.
@@DriveProtected do you just not recommend doing doors bulk? Was thinking of doing my 4Runner but not sure what to do about the handles. I might just try removing the door handles and reinstall them after the PPF is installed.
Great videos. I'm new to this. I've done a few door sills on my vehicles and am considering 1st six inches of hood and front bumper area. What PPF film(s) and mils do you use? I've been using 3M PPF but it doesn't seem as stretchy as what I've seen you use on door handles and fenders.
You're just awesome, mate. Great job.
I especially like how you don't over hype your videos and carry on like a super excited school kid. Thank you for sharing your knowledge.
Great content, simple and objective on how to pack PPF door handles in bulk, congratulations for the video!
Thanks for sharing your information about How to bulk PPF wrap door handles,it's help me a lot
very useful and professional video about How To Bulk PPF Wrap Door Handles, thanks
Great idea,thanks for this pro idea with all. Your detailing is so good. It’s really works.
Thank you for the Pro tips. Nice video as always. Greetings from Germany ☺️
I really appreciate the effort you put into making this video.thanks ❤
this is amazing to see how to bulking wrap door and this is very helpful for me to knowing. thanks for make this amazing video
i appreciate your efforts you put in making video. i understand every point and step ! Thankyou
I really love this PPF Pro Tips!! Amazing!! Thanks for share with us...
Glad you found value!!
I feel sort of stupid for not trying this on a Ram TRX we have at our shop. Def gonna try it next time. Thanks.
A wonderful tutorial thanks for sharing this with us and Its really useful🎉
Thanks for showing us the right way . Awsome video.
This video helped me tremendously on wrapping some Escalade door handles that I’m doing in matte. Thank you!
Glad you found value in the video!
Thanks for sharing this Pro tips. I have learnt about this tips from your great content.
We Purchased a New Car & this CAR PPF wrap door handle will Defense & Protect Paint Film. Thanx for the Tip Sir
This is amazing work, i was learn so much. thank you very much
Great video! Creative ideas. Thank you for sharing your knowledge.
Very detailed tutorial, I can now wrap my door handle on my own. Thankyou.
It looks really good and helpful
woow you are pro i was always wondering how to wrap door handles, i know im not good as you butt i pick up some thricks that you provide and i can make my car a little bit fire ;) keep up good work
Thank you!!
Excellent,the video is very perfect,thank you for information
Glad you found it valuable!!
Nice content and greet work..💪
Wow,, its really amazing tutorial video
Great job
Great informative video. Can you tell me the thickness of the PPF you’re using?
Thanks! 8mls
Can i ask what's your tuck solution made of?
Just hot water.
❤thank you very much master😊
Great video. thank you. I would like to know while doing the door, should I remove the door handles, or just go around it. Do the seams collect the debris and become visible over time?
If you have a good quality pre-cut pattern, go with that. If you don't, then remove the handle and install like that. Hope that helps!
What is the slip solution applied on the clean handle, prior to pot application?
Johnsons baby shampoo and distilled water.
Hi i really appreciate the effort. I would like to see if its possible to do ppf on 2nd piece of door handle. Only then it would be complete. Just wanna know whether it can be done without any release cut
Done without relief cut.
Thank you for this. I'm doing a full wrap on a Toyota Tacoma TRD Pro. The letters are molded (punched) in to the tailgate and bedsides. How would you handle that? Heat the film and stretch it in the the recesses of the letters? It's pretty intricate/detailed.
Check this video out! PPF Pro Tips - How To Lay PPF In Super Duty Letters *TRICKY*
ruclips.net/video/YHnVMVUs4-Q/видео.html
Do you have any videos of a full door PPF install? Not sure how to deal with the door handles with a bulk install.
We do not have a bulk door video unfortunately.
@@DriveProtected do you just not recommend doing doors bulk? Was thinking of doing my 4Runner but not sure what to do about the handles. I might just try removing the door handles and reinstall them after the PPF is installed.
@Fadic4 if you’re going to go bulk, definitely remove the handle for a cleaner install.
What would you suggest PPF cutting should be done by hand or by plotter?
Depends on the situation. Matte door handles? Definitely bulk.
what is your hot water tack solution? Ive had some success with hot water but there are some drawbacks
Hot water. Refill after each panel.
What ppf thickness did you use here and what do use generally?
This was 8ml thick.
What ppf did you use sir ? 😊
Defense+
شرح احترافي شكرا❤❤🎉
Great videos. I'm new to this. I've done a few door sills on my vehicles and am considering 1st six inches of hood and front bumper area. What PPF film(s) and mils do you use? I've been using 3M PPF but it doesn't seem as stretchy as what I've seen you use on door handles and fenders.
We use our Defense+ PPF and its 8ml thick.
Excellent video. Stretching is so important for a perfect looking job. Lots of training and practice required.
Can you tell me what is the brand of ppf
Why don't you use glove? Wont it get fingerprint marks on the f film
No it won’t.
Are you just using hot water for tack ? Nothing else?
Correct. Just hot water.
@@DriveProtected Thank you for the reply. I'm doing a front bumper lower spoiler and I'm concerned about the curve on the spoiler.
Good
What do you mean by bulk
Bulk means not using a pattern. Just one large piece of film that needs to be trimmed off once installed. Hope this makes sense.
@@DriveProtected yeah i got it thanks your videos helps alot 👍🏻👍🏻
❤ nice work
very nice