Love the truck. One thing I would add would be a U bar that runs from axle tube to axle tube that will bolt on the back side of the center link to make it double shear. That will make it bullet proof! Keep up the killer work guys.
I've actually gotten to the point where I stash your videos away until I can get 15-20 minutes of uninterrupted peace to watch and absorb all the detail work! You guy's are single handedly saving RUclips car rebuild channels. Keep it up brothers.
Cha-ching is legit my dream truck 🥵🥰 so happy to see more cha-ching content tbh i started following you guys back when cha-ching was the main build atm 🤘
@@SalvagetoSavage always will be a subscriber you guys put out some BANGERS all the time and I appreciate that you guys put in the time and hours to get the videos rec, edited, and published out to us just to watch you guys do your magic 💯🤘
Love that chevy truck. I had an 67 small window while serving in the Army 22 years. Had to sale it during an divorce 😭, im still crying about that. Spend 8 years serving/ going everywhere while building that truck. Sad day indeed. Lol your truck, sounds great too..👍🏾
I have the same air ride just press and hold thr very bottom arrow or the very top and it'll air the rear bag at the same time then vise verse for the corresponding arrow from the front bags.
If you ever begin to loose air pressure start at with those outer p.t.c. fittings on the manifold. I never had any luck p.t.c. fittings liking any bending lines going into them. If you experience any issues a quick 90 or 45 p.t.c fitting on those outer lines would probably fix it. 😉 its the little things that will get ya. Loved my airride but definitely learned alot along the way. Keep up the amazing work gentlemen, love the attention to detail and you guys always trying to over engineer your stuff. ChaChing is a real beauty
We'll definitely keep that in mind if we start seeing some leaks! And we have to definitely over engineer everything around here. We're a bit rough on our builds! lol
Love all of your videos. Awesome content, great details, and very informative.... T-rays titanium brought me here, been subscribed ever since. Just now had time to catch up on all you videos. Keep the awesomeness coming 🙌
Cha ching is like my dream truck. Hope yall have better luck with your airlift manifold then I do. Also watch the wiring harness. The plugs are 💩 and the pins tend to push out of the connector just enough to not make contact
@@SalvagetoSavage lmao. Iv heard the same about the airlift. I got the airlift 3s with Bluetooth and gotta have an extra phone with me just to use it. It's so picky then occasionally gotta take harness and push pins back in just to air up/down
We've been having pretty good luck with them. We have the system in the Delorean too and haven't had any issues. Our accuair on the other hand stopped working all together.
@@SalvagetoSavage that's good. From what iv been reading and even gathered from airlift they tend to be kinda hit or miss. I do love my air ride setup just kinda sucks gotta have a 2nd phone just to use as a controller. But it's better then nothing
oh oh oh, great video guys. liked and subbed up!! I like that truck a lot, and i learned something new so great. I wonder if you could daily drive it maybe so super soft ride wow. and with the super sticky racing slicks on it, I think it will be a lot of fun in the 1/4mile, super fun. anyways thanks for the content it was epic. ....
Thanks for subbing! Glad to be able to show you something that will help you out when you walk away from the video! Before we daily drive this truck we definitely need to put a bigger AC unit in to deal with the Florida heat!
@@SalvagetoSavage they are the best, the Programability is very cool, have mine set for Highway, Show Car Entrance and Show. I did cut up my ride so can’t get it as low as I would like or as low as your truck. Still cool, thanks for asking.
……and that bench seat is smacking….is it a Snowden piece or did someone else do it for y’all? Please do tell…. I want that seat!! The diamond stitching is gorgeous and that color would compliment any exterior color that you wanted to shoot it with.
Cha-Ching……so I have to ask, you say it’s 750hp and you talk about not giving it “all its juice and berries” on the 1/4 track….so is it fear of some sort of damage, or just a slight hint of fear from 750hp? Lol. I couldn’t blame you either way. Most I’ve driven was about 500hp and that’s not playing around when compared to an average daily driver. Also, I’ve done the LS swap on my 85 c-10 and have it on a static drop currently but I plan to go bags eventually. You guys rock. Keep it coming.
Thanks for all the support! 750hp is a lot of power for a bagged truck. On top of that, there's definitely some stuff we have to do to make a decent "all out" pass on the track, like putting in a beefy front sway bar. Also, there's no real PPE in the truck other than a harness. We don't have a roll cage or anything like that. So it's not really a fear of 750hp but it's a fear of 750hp in a bagged long bed truck from the 60s lol!
How is that Watts link hitting the frame in any way? When the thing is bottomed out, the Watts link should be nearly horizontal and only pivot toward vertical as the whole axle drops with air ups and suspension travel. I don't understand.
There's not a huge amount of travel between ride height and framed out. The watts link is set so that at ride height, the billet linkage is sitting vertically on the pumpkin. So when the truck is sitting lower than normal ride height or all the way aired out, that watts link is still more vertical than horizontal. Add the heim joints and rods and there's not much clearance between where our stock watts link set up was sitting and the bottom of that tubing.
@@SalvagetoSavage okay!!! I was searching so hard once I saw em in the video. That makes way more sense. Thank you! Dope channel Btw.. I have a build I think you guys would like which is a Patina Track inspired Shelby GT350R tribute
great job Mikey ....Ist fun for me to watch your vid.s and I have that truck on my phone to show my friends that I took a few pic.s when I was at your shop, I will see you guys at PBIR and bring my Fatboy. be cool man
These videos r so chill n fun to watch. Shop, crew, builds all have really cool vibes. Even the music is perfect❗🔥🔥🙏🏽
Thank you so much! Glad you like them!
Love the truck. One thing I would add would be a U bar that runs from axle tube to axle tube that will bolt on the back side of the center link to make it double shear. That will make it bullet proof! Keep up the killer work guys.
We'll have to look into doing that! Thanks for all the support!
I've actually gotten to the point where I stash your videos away until I can get 15-20 minutes of uninterrupted peace to watch and absorb all the detail work! You guy's are single handedly saving RUclips car rebuild channels. Keep it up brothers.
We're so stoked that you like our videos! We'll keep putting out the content if you keep tuning in. Have a great new year!!!
Always nice to have a craftsman take out their old work and put in upgrades and updates.
Cha-ching is legit my dream truck 🥵🥰 so happy to see more cha-ching content tbh i started following you guys back when cha-ching was the main build atm 🤘
That's awesome! Thanks for sticking around for so long. We really appreciate your support!
@@SalvagetoSavage always will be a subscriber you guys put out some BANGERS all the time and I appreciate that you guys put in the time and hours to get the videos rec, edited, and published out to us just to watch you guys do your magic 💯🤘
Love that chevy truck. I had an 67 small window while serving in the Army 22 years. Had to sale it during an divorce 😭, im still crying about that. Spend 8 years serving/ going everywhere while building that truck. Sad day indeed. Lol your truck, sounds great too..👍🏾
Thx Fred! Yah divorce can definitely change what’s in a man’s garage lol. And thank you for serving our country brother.
Definitely a Savage truck and I got goosebumps when you started rowing those gears in what I can only imagine is Tremec 6 speed.
When you're sitting in the truck as it's hitting all the gears, it definitely makes you think "muscle truck." Every part of this C10 is angry lol
I have the same air ride just press and hold thr very bottom arrow or the very top and it'll air the rear bag at the same time then vise verse for the corresponding arrow from the front bags.
Long as you guys always slide some truck action in there I’ll be tuning in eh🇨🇦 sick fab skills 💯
Super nice truck, love the sound!
Glad you like it!
Blows my mind you guys aren't at 500k+ subs... just keep up the great content !
We'll get there eventually! Just trying to give you guys the best content we can. Hope you're enjoying the videos!
Excellent work brother.
The old Chevy C10 LS swap kit with the Drifter has been completely different than that.
Thanks 👍
@@SalvagetoSavage Your welcome sir.🤝
That Airlink system looks neat (pun intended). The truck looks good. Bravo team!!!
Sooooo neato
If you ever begin to loose air pressure start at with those outer p.t.c. fittings on the manifold. I never had any luck p.t.c. fittings liking any bending lines going into them. If you experience any issues a quick 90 or 45 p.t.c fitting on those outer lines would probably fix it. 😉 its the little things that will get ya. Loved my airride but definitely learned alot along the way. Keep up the amazing work gentlemen, love the attention to detail and you guys always trying to over engineer your stuff. ChaChing is a real beauty
We'll definitely keep that in mind if we start seeing some leaks! And we have to definitely over engineer everything around here. We're a bit rough on our builds! lol
love that cha-ching! 🛻💨
Cha Ching loves you to momma
Love all of your videos. Awesome content, great details, and very informative.... T-rays titanium brought me here, been subscribed ever since. Just now had time to catch up on all you videos. Keep the awesomeness coming 🙌
Awesome! Thank you! Glad you're enjoying the content
Great work guys, another fantastic build.
Thank you 🤗
Cadillac used a control arm complete with a ball joint to center the rear end on my 64, I bet it would work for Cha Ching.
Will have to check that out! Thx for the heads up
Nice to watch craftsman work, thanks for sharing guys.
You bet Tim, thx for watching and following along. 🤘🏽💯
Cha ching is like my dream truck. Hope yall have better luck with your airlift manifold then I do. Also watch the wiring harness. The plugs are 💩 and the pins tend to push out of the connector just enough to not make contact
Thanks for the heads up! Anything has to be better than our Accuair manifold
@@SalvagetoSavage lmao. Iv heard the same about the airlift. I got the airlift 3s with Bluetooth and gotta have an extra phone with me just to use it. It's so picky then occasionally gotta take harness and push pins back in just to air up/down
We've been having pretty good luck with them. We have the system in the Delorean too and haven't had any issues. Our accuair on the other hand stopped working all together.
@@SalvagetoSavage that's good. From what iv been reading and even gathered from airlift they tend to be kinda hit or miss. I do love my air ride setup just kinda sucks gotta have a 2nd phone just to use as a controller. But it's better then nothing
What we like about it is the customer support too. We've had pretty good luck getting the help from them when we needed it
I love this truck. Looks nasty sittin on the ground. +1 for 1/4 mile pull!
If we can get our hands on a spare set of tires, we'll definitely be doing a 1/4 pull!
My favorite truck on the youtubez
Well thank you brother, if your interested in owning it let us know. Time to sell cha Ching so we can build something new
Awesome, cool rebuild
oh oh oh, great video guys. liked and subbed up!! I like that truck a lot, and i learned something new so great. I wonder if you could daily drive it maybe so super soft ride wow. and with the super sticky racing slicks on it, I think it will be a lot of fun in the 1/4mile, super fun. anyways thanks for the content it was epic. ....
Thanks for subbing! Glad to be able to show you something that will help you out when you walk away from the video! Before we daily drive this truck we definitely need to put a bigger AC unit in to deal with the Florida heat!
beautiful truck
Thx Josh. It will always be one of our favorites. But time to sell it so we can build something newer and better
Happy New Year guys. Awesome job
Thanks! You too!
Crazy fun build. I used the same air/bag system. Happy New Year
How do you like them after using them for a while?
@@SalvagetoSavage they are the best, the Programability is very cool, have mine set for Highway, Show Car Entrance and Show. I did cut up my ride so can’t get it as low as I would like or as low as your truck. Still cool, thanks for asking.
……and that bench seat is smacking….is it a Snowden piece or did someone else do it for y’all? Please do tell…. I want that seat!! The diamond stitching is gorgeous and that color would compliment any exterior color that you wanted to shoot it with.
We did the full interior aside from wrapping the bench seat in the leather.
Great job guys 👍👍
That truck is amazing that dash cluster is ducking badass
Thank you!
That’s a beautiful truck!
Thank you!
Awesome !!!
Just goes to show a cool build is never REALLY finished!
That's one of the fun parts about our shop builds too. It gives us a chance to see what exactly works, and what we can be doing better!
@@SalvagetoSavage Always seeing what you can improve...that's one of the MANY things that make you guys so AWSOME!
We try our best! Thanks so much for all the support!
Fantastic
Thank you! Cheers!
what a sick truck !!! low key wondering who did the interior? looks super clean
Full custom interior. We did everything in house besides wrapping the bench in the leather.
Cha-Ching……so I have to ask, you say it’s 750hp and you talk about not giving it “all its juice and berries” on the 1/4 track….so is it fear of some sort of damage, or just a slight hint of fear from 750hp? Lol. I couldn’t blame you either way. Most I’ve driven was about 500hp and that’s not playing around when compared to an average daily driver.
Also, I’ve done the LS swap on my 85 c-10 and have it on a static drop currently but I plan to go bags eventually. You guys rock. Keep it coming.
Thanks for all the support! 750hp is a lot of power for a bagged truck. On top of that, there's definitely some stuff we have to do to make a decent "all out" pass on the track, like putting in a beefy front sway bar. Also, there's no real PPE in the truck other than a harness. We don't have a roll cage or anything like that. So it's not really a fear of 750hp but it's a fear of 750hp in a bagged long bed truck from the 60s lol!
Love your videos! That seat is🔥🔥🔥. Where did you have it done?
E3 upholstered it, but we modified it here in house to fit the truck!
fun drinking game idea, every time ( watts link ) is said. drink.
Watt! Watt! Watt!
Nice
Thank you!
How is that Watts link hitting the frame in any way? When the thing is bottomed out, the Watts link should be nearly horizontal and only pivot toward vertical as the whole axle drops with air ups and suspension travel. I don't understand.
There's not a huge amount of travel between ride height and framed out. The watts link is set so that at ride height, the billet linkage is sitting vertically on the pumpkin. So when the truck is sitting lower than normal ride height or all the way aired out, that watts link is still more vertical than horizontal. Add the heim joints and rods and there's not much clearance between where our stock watts link set up was sitting and the bottom of that tubing.
goof job man 👍
good
Thank you!
Hells yeah sheeeeeew BUDDY !
Hope you had a great Christmas Gene!
I wonder how much it would cost to redo a PT cruiser if I had the money I’d get my 2001 PT cruiser a little updated
Twin Turbo LS PT Cruiser?
@@SalvagetoSavage that would be cool!!
Bro Cha-Ching is a bad bitch!!! What a sick ass build!
Thank you!!!
Where did you guys get those fender covers on the Chevelle in back? They look extra large and Long.. are those the ones I see on Summit and Holley?
They're from Holley! What your seeing is two overlapping on one side though
@@SalvagetoSavage okay!!! I was searching so hard once I saw em in the video. That makes way more sense. Thank you! Dope channel Btw.. I have a build I think you guys would like which is a Patina Track inspired Shelby GT350R tribute
Can you get a camera so we can see the watts link in action?
We'll try to get one mounted under there so you guys can get a good look at it!
great job Mikey ....Ist fun for me to watch your vid.s and I have that truck on my phone to show my friends that I took a few pic.s when I was at your shop, I will see you guys at PBIR and bring my Fatboy. be cool man
Love to hear it! See you at PBIR!
Anyone else think that Don sounds like Ray Romano?!
What's that whatslink doing? 😁😁😜😜
Tim made that joke 10 more times off camera too! lol
Is the Bronco project coming out soon?
We'll be showing you guys what we're doing to it. It's not too crazy though.
time to sell Cha Ching, who's ready for it?
Awesome work, but really, I think this should have been caught during the build.
Like you said SEMA
What does the two other cars we brought to SEMA have to do with the truck that stayed here in Florida?
SEMA builds took presidents, the DeLoren and the C10 build. Other wise this would have been addressed months ago.
Bro, I was a huge fan of Accuair, but too bad they’re products didn’t hold up…. my CTV is on borrowed time!
I think their products are great, but it was the support they lacked. Now a huge company owns them so maybe they’ll turn it around.
👍👍
Watts wiggle room?
No burnout? No positrack?
Next Saturday we’ll be on the track, don’t have enough tire left to do to many burnouts. 😬
Is that 72-75 Wini Indian for sale ?
Nooooooo way! That baby is gettting ready for a full s2s makeover.
Is she for sale?
Yup! Shoot us a message on IG
Where can I get a good watts link?
JC has made the best one we've had so far. Shoot him a message on IG @JcCustomsCNC
@@SalvagetoSavage thanks and great video as always
💪👊👋
Sheeesh, that truck is bad.
CONTROLLER
I JB WELD MAGNETS TO ALL OF MY REMOTE CONTROLS - THEY ARE THEN STRUCK TO THE SIDE OF MY PC TOWER ON MY DESK-
That's a good idea! We gotta see how long the cord reaches to see where we can magnet it to
.
Is one fleap sead ho spead seed sir thancs bye
you need to fix your audio problems
Make sure to go buy some merch so we can invest more into audio equipment
Lol, 'Patina' ... another name for running out of cash to finish the build. Dafuqouttahere.
Not really, money wasn’t and isn’t a problem. I actually love old vintage rusty patina shit!
I WOULD LOVE TO SEE HOW YOU WOULD DO ONE FOR OEM 12 BOLT WITH A REMOVABLE BACK COVER
We’d fabricate a bracket using the rear end to mount to instead of the pumpkin. Duh. 😆