2016 CHEVY TAHOE / GMC YUKON SPARK PLUG CHANGE | HOW TO
HTML-код
- Опубликовано: 21 сен 2020
- 2016 CHEVY TAHOE / GMC YUKON SPARK PLUG CHANGE | HOW TO
What’s up my G’s hopefully this video was helpful on how to change out spark plugs! Stay tuned for more upgrades to the Tahoe and also hit that subscribe button if you already haven’t!
#2016chevytahoe #sparkplugs #howto
You my man are my hero, if I knew you I would BBQ a whole cow for you. You the only video the show’s number 8.
I don't know much about all this. I'm learning now.
Ty for this video. Really helpful 😊👍
Called a repair Shop today , they guoted 439.00 to change plugs. OEM plugs are 6.95 each.
Mine just quoted me $509 + tax
For that #8, you need to remove the engine :D
Actually, it is easier to do it from the tire well, just remove the tire and it is easier to reach it from there for all of those spark plugs.
No no no!!! Do it from the top it's not that tough
@@stevenstair1068 meh; you can't see anything from the top.
@@scientist100 haha I've wrenched for 52 years on engines and all kinds of machines and if I had to see what all I touched I'd be still working on them,, you wrench with feel as much as seeing
@@stevenstair1068 I agree but guessing a location and unreachable part is impossible with a swivel head extension. A lot of us know that the spark plugs are angled and then skewed in these and are hard to get it on. If you have really skinny or baby hands maybe you can reach it but I could not and I do not have long arms.
@@scientist100 I didn't use a swivel just a 1 1/2 inch extension on the socket and cracked it loose and fingered it out then back in same way
Great vid! Thanks!!
Thanks for watching! 🙏🏼
Also other vids show the tire and wheel well removed making this a lot easier to do👍👍
Just some info a old mechanic told me blow them out with compressed air before removal so nothing falls in
Good shit homes
Good video. 👍🏾
Appreciate it 🙏🏼🤟🏼
Thanks bro did you gap them or do the come gapped
Thanks a lot
I have a 2016 Tahoe LTZ and recently I been feeling my car pulling when I accelerate. I don’t know too much about cars. But does that mean I need new spark plugs?
Hello,I have over 100k on 17gmc,did you know anything different went you replace your plugs? Thanks
Is it worth buying a 2016 tahoe w 65k miles for $6900 ish even though there's oil in the spark plug sockets? (Probs a gasket issue). How hard would it be to fix it (clear oil, replace gasket, new spark plugs)?
# 8 is easier from the bottom
eso es todo mijo
👍👍👍
number 8 plug go right thru the wheel well. takes 15 minutes btw removing the fender liner and changing the plug
My Tahoe just it 80k should I change them or wait for it to hit 100k?
I recommend to change them now bro 👍🏼
Exhaust?
Did you change out the wires as well? If not, why?
I did not change out the plug wires, i was lucky and none of the wires broke during removal. So I just reused the original and at next service I will replace it all. Thanks for watching 🙏🏼👍🏼
I think spark plug wire replacement isn’t actually necessary unless they’re damaged during replacement or their resistance is out of specifications.
Per GM repair manual, spark plug wire resistance should be 170-220 Ω per 25.4 mm (1.0 in).
It is easier if you go through the wheel well on the passenger side.
I’ll probably do it next round of plugs thru the wheel well, thanks boss!
Did a spark plug change on mine as well and also changed the cables for new ones, but after finishing, my truck got a vibration going on. Was wondering what you recommend
Do a top engine clean to clean them valves they could have alot of residue making it run weird, or double check to see if wires clicked in on plugs 👍🏼
Make sure the spark plug wires are installed correctly and the wires’ resistance is 170-220 Ω per 25.4 mm (1.0 in).
Make sure the spark plugs are torqued to 20 N•m (15 lb•ft).
When am i supposed to change the spark plugs on yukon 5.3 2019
97,500 miles
What exhaust you have on that?
Carven Type R bro! plan on doing a review and sound test on it soon! 🤟🏼
I changed mines and the engine is shaking and making a ticking noise from the right side. Can you help?
Lifters
Other vids say 11 to 13 lbs of torque 💪💪👍👍
15 lb/f per alldata spec info.
Me after changing and almost breaking my hands my damn check engine light came on and it gave 2 codes
Viva la tacuache
😂🤣
How in the ever living hell did your aluminum covers come off so easy. 20 mins, and still can’t get number 3
Any tips?