The problem with that type of spool adapter is they don't allow for the removal of the rear wheel. They are only good for basic servicing and storage. Glad to see your back!
I have CBR 250 tri color, can u make a video on how to maintain it as smooth as butter, getting little vibration. How to increase acceleration without changing any stock parts..
BrownBrady Just put very similar adjuster blocks with spool attachment on my CB500F and used blue locktight...for easy disassembly if needed. Recommended by most spool manufacturers. I gotta buy a new lift now too. My concern is how secure the blocks are in the swingarm...for a 400lb. Bike. Mine are from Strada 7.
hello sir... i have 250 2018 model. what is the different between Inadia model and International model..please keep reply...i am your subscriber..from - India
Thanks Amaey :-) Im in Texas we don't have very much winter here, so the bikes done really sit for that long. But its good to know why it would need to be done.
GDUB Well, I am from India and here temperature doesn't drop below 8 degree Celsius. Also being a developing country, we use our bikes all the time, it's faster and cheaper than anything else, even public transport.
Hi BrownBrady technical Question please HELP ! How do I get engine oil distributed in BMW r100rt that is layed up not run for years to minimise dry engine components grinding together?
Hi..Brady it's been 2 years you been using this exhaust have you found anything different with the bike such as engine heating lower fuel range etc would love to hear from youuuu Cheers.
Please don't use adjustable wrenches. Use the correct ring wrench or socket. They don't cost much. If you MUST use an open ended wrench, use it the correct way round. Notice that the arm is on an angle. You should be dragging the wrench so that your knuckles are in line with the bolt head. Otherwise you risk tumbling off the bolt heat when you are at max effort.
I know this is a super late reply but you do not need spools as long as the rear stands are narrow enough or adjustable. I had the Venom stands and they worked fine without the spools.
No way would I put the weight of my bike on them..not being funny. each to their own and all that..but they look cheap and weak..just my opinion..as for the stuck nuts and bolts use a Stillson’s
I was like where have I seen this guy before and then I remembered you have another channel where you taught me about equatorial telescope mounts!
The problem with that type of spool adapter is they don't allow for the removal of the rear wheel. They are only good for basic servicing and storage. Glad to see your back!
That's a good point, Brett, I havent thought of that. I should have mentioned the pros and cons :(
Mr BB, another clear and concise video, especially good to include when things don’t go to plan. Learn lots more that way.
Thanks as always, BrownBrady, for another informative, darn-near calming vid!
Thx Sir. Hello from Indonesia. I ride a CBR 250r as well. This video is very informative.
Happy New Year, BrownBrady! Hope all is well with you and hope you get back to posting soon!
zup man, why did you stopped making vids...
Welcome back, dear!
Great vid, my yoshi spools are in!.
Nice!
Thank you for your amazing videos about honda 2cbr50r
Hi brady you okey?
I have CBR 250 tri color, can u make a video on how to maintain it as smooth as butter, getting little vibration. How to increase acceleration without changing any stock parts..
upload some more vedios man its been 6 months.. since you last uploaded
May I ask for a link to this product
Put some red threadlock on the spools so they don't loosen over time due to vibrations.
Thanks for the tip, Jeffery. I was actually thinking of removing the spools during the summer unless I'm working on the bike.
Francois Deshue the new cbr is 2 cylinder... but this one... is single
BrownBrady Just put very similar adjuster blocks with spool attachment on my CB500F and used blue locktight...for easy disassembly if needed. Recommended by most spool manufacturers. I gotta buy a new lift now too. My concern is how secure the blocks are in the swingarm...for a 400lb. Bike. Mine are from Strada 7.
@@Brownbrady hey are you alive??
Are sliders attached to that
@brownbrady I hope all is well.
Do you recall how large you had to get the spools drilled? Sorry I know it has been awhile!
How to tou adjust for chain slack with the spools I don’t undertand how to get a wrench in there
\o/ I just had my first ride in my Nighthawk! I thought of you! I hope you are out soon! Cheers
hello sir... i have 250 2018 model. what is the different between Inadia model and International model..please keep reply...i am your subscriber..from - India
Your bike still look brand how did you manage???
Mine is just look like trash ☹️☹️
man love your vedios...... where is your honda 450 nighthawk i have'nt seen it..
That's because I sold the hawk back in the summer.
buy another classic honda .. that make your channel unique when you work on two different bikes and show us their ways how to work on them..
What is the size dimension that you got the metal hole cut?..
use correct ring spanner strike wtth a rubber mallet works for me
Nice vid BB :-) Question for you..why do you store the bike on lifts during winter?
GDUB Tires go bad at contact area.
Thanks Amaey :-) Im in Texas we don't have very much winter here, so the bikes done really sit for that long. But its good to know why it would need to be done.
GDUB Well, I am from India and here temperature doesn't drop below 8 degree Celsius. Also being a developing country, we use our bikes all the time, it's faster and cheaper than anything else, even public transport.
Great vid. Thanks BB.
As Amaey already mentioned, it's possible to develop flat spots on the tires at the contact points between the tire and concrete.
How do you tighten the chain now? Do you have to remove the spool first?
Where did you go
Great.thanks for sharing.
Hi BrownBrady technical Question please HELP ! How do I get engine oil distributed in BMW r100rt that is layed up not run for years to minimise dry engine components grinding together?
Where did u go?
Hi..Brady it's been 2 years you been using this exhaust have you found anything different with the bike such as engine heating lower fuel range etc would love to hear from youuuu Cheers.
Did you sell the cb450sc?
Hi bro I like to ask how to change my mc22 cbr 250rr suing arm to single suing arm please tell me me any one or where can I buy in online
Does anyone know if this same swing arm spool plate and nut he is using also fits on a cb500 1993 to 2003??
Hey Man, I'm No Expert But I'm Pretty Sure The Crescent Wrench Is Typically Only Ever Used As A Last Resort, Thank You.
Great 👌👍🤝
Please don't use adjustable wrenches. Use the correct ring wrench or socket. They don't cost much.
If you MUST use an open ended wrench, use it the correct way round. Notice that the arm is on an angle. You should be dragging the wrench so that your knuckles are in line with the bolt head. Otherwise you risk tumbling off the bolt heat when you are at max effort.
Where did you get the plate kit from?
I got them from eBay but I don't recommend because they did not fit the bike. I recommend these ones from Amazon instead: amzn.to/2AZrGvj
BrownBrady ok thanks
Rm400 transfer to Malaysia to expensive
How is set for front side ?
Do you have to have spool to use a stand in the cbr300r?
Hey @drapermike, I just got my cbr300r and figuring out what spools I should get. If you have any recommendations please let me know.
@@omergul732I bought a stand that just rests on the flat bar so I didn’t need to get a spool set up..got a venom one off Amazon for like $70
I know this is a super late reply but you do not need spools as long as the rear stands are narrow enough or adjustable. I had the Venom stands and they worked fine without the spools.
I want this.... bro
Do you have to have spool to use a stand in the cbr300r?
$70 for those brackets? 😱
😂
Nice
You can get spray cans of, I think liquid nitrogen, and spray the bolt.
Good
Ffss, it's been years with a 250, aren't you looking to get a cbr1000rr or any superbike? ;)
Its almost springgggggggg
spray WD 40 and wait for a few minutes
lol 70 dollars for an adapter? for that price you can just buy a swingarm rear stand!
No way would I put the weight of my bike on them..not being funny. each to their own and all that..but they look cheap and weak..just my opinion..as for the stuck nuts and bolts use a Stillson’s