Building a Jigsaw Cutting Station - Dekupaj Testere Kesim Tezgahı
HTML-код
- Опубликовано: 8 сен 2024
- For fast, straight and secured cuts multifunctional jigsaw cutting station. Easy build and perfect result. You can find all the measurements at the end of the video..
Hızlı, düz ve güvenli kesimler için dekupaj testere kesim istasyonu.. Yapımı kolay ve mükemmel sonuç. Tüm ölçülerini videonun sonunda bulabilirsiniz.
Bir Türkü burada böyle bir araç yaparken gördüğümde gururlandım.
Eline sağlık usta
Teşekkürler Murat Bey
Great video! I'm making one for my students. And for those who asks about the difficulty in seeing where you want to cut. Make the last piece of the sled have a wider hole and then cover it with a transparent plastic sheet. It makes the saw move easier and you can see the where your cut will go. Thanks for this wonderfull instruction.
4 years ago you made this... and I just found it now. Thanks for sharing this. I'm a real beginner in woodworking. This would help me so much.
Нет слов! Я просто восхищен. Обязательно буду себе делать Ваши приспособы. Спасибо огромное за ясное и понятное видео, без тягомотины и кретинических пояснений. Удачи в творчестве и по жизни!
Very inspiring - I would consider making the bottom of the long slide out of transparent acrylic in order to be able to see markings on the wood to be cut...
Brother, from Venezuela a fraternal greeting. Indeed, these ideas are a source of inspiration in our context where we have little access to technology for the use of important tools and are of permanent use. Thank you for making life less insufferable. Affectionately yours
Note: Please excuse my bad English
wonderful...only one area I will change. I will use clear pexiglass for the bottom of the sled the jigsaw slides on. that way I can see marks. otherwise this is perfect.
Gökmen ты крутой мастер... Только уважение! Я многому у тебя научился! Здоровья и успехов на канале!!!
Blind cuts since you can't see your marked lines under the wooden table-guide. Maybe try Plexiglas?
My thoughts exactly
If you remove the jigsaw sled, place your workpiece and clamp it down with the sled again you know where the cut will be, you could also install a ruler in the base board as an improvement.
At some point I'm likely gonna build this. Nice idea. Might place a section of acrylic in the guide to line up my cuts.
Excellent to cut at a random position. But you get trouble if you want to cut THE position. You cant see the marks on the target. You should cut a wider slot at the blade for visual purposes (position the target to the right place).
Very nice indeed. I don't know if I bother if I had a circular saw Tho..
I see he did as well for the drill and for other tools.
You are a Genius Sir.
Now I need to find how to make something similar for my jigsaw without the requirements of circular saws or other high tech tools.
I'm very impressed.
Thanks for your video.
Thank you, I was just looking for how to build a jigsaw cutting station and that's the best one!!!
Many thanks for your kind idea
i try to cut on straight line by jigsaw many times but i can,t , i think your mervelous idea will solve all my problems
thank you
Plexiglass could be placed on the saw's slide base to see the cutting area more easily.?. A narrow strip in the middle, just where the saw blade passes, the rest wood. This would avoid scratching the plexiglass too much
Great and easy to follow DIY wood working essentials. Thanks for sharing it for free. Very good substitute for expensive commercial tools and equipments.
yaptığınız işler ve bunu bize sunuş şekliniz (önce ne işe yaradığı sonra yöntem ve en sonra malzemeler) harika. çalışmalarınızda başarılar dilerim .
Great and very original design. Thank you for sharing
Супер! Золотые руки! Тоже себе такое сделаю👍
Great video and interesting project, it's only a matter of time before there is a serious injury to your right hand ...use push sticks please on the next one.
I really admire your workshop.. your like a wood master
saludos, lo felicito, muy bueno el vídeo y sera que tiene uno para una sierra circular, agradecido por lo didáctico y explicito que fue
Muito genial. A minha já está a todo vapor. Parabéns e obrigado pela engenhoca.
Gokmen ALTUNTAS...has became my one of the most most FAVOURITE channel ...
your each creation is smart
no words to express thanks to you...
GOD BLESS YOU ! ! !
Вместо напряляющей деревянной, я бы сделал из оргстекла. Ведь не видно рез, а при точных работах это очень важно
Кстати хорошая идея . Дерзайте .
I buy a basic Jigsaw to cut wood at home, I see a video guide to make a tool that makes my basic jigsaw cut more precise... fantastic👍
Step 1 - Turn on your bench mounted routing tool? in your workshop....
Forget it 🤣
Nice vid tho
Make the saw frame jig out of fairly heavy CLEAR Plexiglass so you can see the wood you are cutting . You can not see it with the jig you made. But other then that it is a good unit.
You can see the cutting line if you extend the center of the guide a few millimeters
I mean I drew the cutting line on the piece to be cut, I tried to line it up in the slot of the saw holding jig. It was very hard to see. SO I made the cutting jig out of 1/4 inch plexiglass. That way you can see through it and it helps in lining up the cutting line.
+David Bowser complimenti ne approfittero grazie
Вся гениальность твоих работ в простоте. Здорово, мне нравится.
I enjoyed this video so much. I just found you and was really goo, goo eyed the whole time. You just about have all your power tools homemade. So economical!
I have to give you max props man. So many woodworkers with high end equipment and you just simply do it with such ingenuity. Love it.
Count me in as a subscriber.
I don't know who are the idiots that gave you thumbs down, shame on them for doing so. And the music was a welcome sound, not overbearing and loud. You're a jem man. Keep it coming.
Very nice Build smart and sturdy.Thank you for sharing your Knowledge and talent.
Tudo que precisava para usar bem minha tico tico. Cabe em qualquer canto, bom para nós que fazemos arte em casa 😁😉👍👍👍👍
absolutelly love this kind of tool (and the ones used to make this one)
very inspiring
thank you Gökman
I think this would be better if the bottom piece of the jigsaw holder would be made out of plexiglass. Just so you can see precisely where you cut.
Safety and precision genius. Thanks!
Really good. I have just bought a new jigsaw. Guess what I'm making!
Best Jigsaw table I ever saw! I will build mine as described in this video. Thanks so much!
You want to make a jig for the jigsaw so it can saw straight.But the problem arises as you need the appropiate tool for making straight pieces of wood for this jig : a saw that can make straight cuts ,a circle saw.
Class ! Смотрю ваши видео как заворожённый ! Мастер - ЗОЛОТЫЕ РУКИ !
СПАСИБО !
Ustam çok güzel pratik bi çalışma olmuş. Ancak aklima takilan bisey var. İşaretledigimiz yada ölçüsünü aldığımız yeri bu şekilde nasıl görecez?
Isn't there anything this man can't make out of wood. Jolly good job Sir, and keep them coming. Thankyou !
Хорошая вещь как раз ламинат стилить пригодится!!!
@Галина Павленко 😃
Gökmen hoca, alet sesini biraz daha kısarsan seyir zevki 10 numara olacak. O zaman müziğe bile gerek yok.
Suas ideias são maravilhosas Deus te abençoe
I now have an idea of making It with transparent solid plastic board. So I can see through my work.
Thank you for your idea.
btw, what's the tool at 00:37 - 01:22 you used to make the board?
Solo tengo una pregunta.. Como sabes donde va a ir el corte.? si no ves por la madera qe tapa por donde se va hacer el corte..
Вы молодец, замечательная вещь получилась.😃👍👍👍
Hallo
Danke für diese tolle Idee mit der
Stichsäge Werk-Bank Habe mir auch so eine gemacht sie funktioniert Einwandfrei Lg
i love watching this dude work
Simple and beauty design' good job👏👏👍🏽
الان سنة 2022 وهذه الفكرة رائعة
تستحق كل الشكر والتقدير
Now 2022, and that's a great idea.
You deserve all the thanks and appreciation
😍❤️😅
Vertalen
One change only, the guide should be of plexiglass, to see when you sow, but it is nice workplatform!
with scratch resistant screen / film ?
I was about to say the same thing , you can't see the exact mark or length of the board that your cutting.
Hola Campeón excelente trabajo me acabas de dar una idea de un proyecto que no terminaba pero al ver tu video al fin lo terminaré
Bom projeto. Sugiro um rasgo no meio, onde está o recorte para a lâmina da serra para ver a marcação do lugar onde será feito o corte na peça a ser cortada.
That's a way to get rid of all the plastic (garbage) they sell! Super creative, honest craftmanship.
Springs under the cutting board on the bolts could be helpful for releasing cut piece
bugün gündüz aynısından yaptım ölçüleri daha büyük olandan ve denedim mm'lik
montaj ve işcilik le mükemmel oldu fikir için tesekkurler -yarında yuvarlak kesim için tek parcalık extra aparat yapacam onunda malzemesi hazır .
Absolutely mesmerizing to watch you work. Nice set of home made tools too. Your skills are highly impressive.
very cool!!!! I'm checking out your mobile drill press next. I thought since I have a band saw and drill press I would not need these jigs but I was wrong. These are very cool and my next build will be both of these...Thank you very much
Great job. Just one question: How do make sure you cut your workpiece at the mark when using this jig?
Mükemmel bir fikir ! Dahice ve incelikle uygulanmış. Kendime de bir tane yapmayı deneyeceğim. Fikir için teşekkürler !
I'd replace the top plate which guides the saw with some kind of transparent plexiglass so you can see where you are cutting the wood
The plexi may scratch over time
Huawei phone still better to see something than nothing ;-)
Идея понравилась. И улучшать можно бесконечно!
I appreciate what you have made but I need to know that How do you measure the bottom wood under the jigsaw? How do you know where to cut the highlighted wood? I mean cutting a rough wood is ok but if I am making a drawer then I need to cut exact measured wood? So I am little bit confused here....bcuz the underneath wood is hidden under your jigsaw so how do you know you are cutting on the exact marked line??
make 1 inch holes along its route ever 4 inches and the very end stop. that way you see you pencil mark line. or use perspex instead 6mm it will have stregth from the side runnuners that hold it in place.
You can see the piece to be cut if you change plywood for laminate acrylic, problem solved.
@@ernestocabrera3971 Ive got a glass/plexi glass company just around the corner. I'll use 1/4'' plexiglass!
Paylaştığınız için teşekkür ederiz.
Fiz algumas adaptações. Usei cantoneiras de ferro em L. Assim não precisei fazer a cava para a serra deslizar.
Thanks for sharing!! I'll build on station like this one shown, very soon!!
оболденно, super , то что надо, лайк. рахмят Татарстан 👍
Gökmen bey tüm videoların hepsini en az 10 ar kere izlemişimdir .Ahşap hobicilerin kullandığı tüm aletlerin basit bir şekilde yapıp videolarını ölçülü olarak koyuyorsun.Helal sana .Tebrik ederim . Kolaylıklar dilerim.
Great! Very useful! But how do you decide the situation when you need to see the cutting line, or point, or to cut exact length? May be it would be more effective to use a piece of Plexiglas like a cutting base...
I extended the cut line later than, but your idea is cool too
Absolutely need to one of this for my Black&Decker Workmate bench application
Muy bueno! La base del riel yo la haría con un acrílico transparente así se puede ver donde haces el corte.. Por ahí a alguien le sirve mi idea. Saludos
Oh, I like this. Not only does it keep your cuts straight and smooth, but it is also safe for a disaster like me I mean there are times I should not have access to power tools! So far, I have been lucky!
QUE FANTASTICO QUE HA QUEDADO , EXELENTE !!!!!!!!!
gracias, me alegra que te guste 😊
love it, gonna make it next summer no fail. thanks
Brilliant!!!!! But never pass your fingers across a moving blade like you did when you used the router. That is extremely dangerous.
Awesome bench ideas and jigs, Thanks
Excelente. Muchas gracias. Lo único que reemplazaría, es la madera en donde apoya la caladora, por una pieza transparente. De esa forma se pueden ver bien los trazos que hayamos hecho en la pieza a cortar. Muy buen video. Gracias.
Спасибо большое! Великолепно! Ничего лишнего! Буду себе собирать! Ждём новых идей!
Big question. How can you see the line that you wants to cut??????????
Отличная работа! Спасибо за идею))
Просто и с умом...
O melhor trilho para tico tico que já vi até hoje !
Também achei!!! Best Jigsaw table I ever saw! I will build as described. Thanks
João Henrique Gonçalves dos Santos cara você poderia me passar as medidas ?
Joaopaulo Silva boa tarde cara então as medidas aparecem no final do vídeo eu pretendo fazer uma em breve mas pretendo trocar a parte que corre a serra tico tico por uma peça de acrílico.
João Henrique Gonçalves dos Santos Ah sim ... Bem legal .. obrigado
Muito proveitosa essa idéia!!!
Maşallah bunları marangozların olmadığı yerlerde evdeki makineler ile hazırlamak güzel ve eğlenceli ayrıca da daha az masraflı biraz da zahmetli olur ama değer bence :)
SELÇUK KAYIKCI
Eres genial!!!
gracias :)
Best jig i have seen so far.👏🏼👏🏼👏🏼
How do u know what length u r cutting as the wood will not be visible under the fixed plank
ObiWanAugus
Hace 1 mes
Excelente. Muchas gracias. Lo único que reemplazaría, es la madera en donde apoya la caladora, por una pieza transparente. De esa forma se pueden ver bien los trazos que hayamos hecho en la pieza a cortar. Muy buen video. Gracias.
فكرة جميلة .....شكرا جزيلا ...يوجد ملاحظة تدرج المسافة عند المقطع لمعرفة طول القطع بالضبط Nice idea ..... thank you very much ... there is a note grading the space at the clip to know the exact length of the pieces
Very nice! Simple design.
Good work...just make a square space at the end of the jig so you can see the marked line where you need to cut.👌
It's a great great idea, but, I have just one question ¿how do I see the cut mark in the wood? where do I will the cut? the wood doesn't allow to see the cut mark. that's my comment, but it's an excellent idea¡¡¡
I have same question ..
It could be possible to replace the base batten with a transparent Plexiglas batten...
An undermount shade vision camera🤔
Wow I wish that I had seen this video before buying my drill stand and jigsaw guide well done. More more and more please
Hace falta hacer dos ó tres orificios sólo en la guía para ver la línea del corte. BENDICIONES para todos. Ya hice la mía
Отличные поделки для дома. Огромное Спасибо!
Excellent Work!
Other jigsaw station videos i watched didnt have measurements, thank you for including measurements in the video
You need a website with all the plans for those awsome projects ;)
Just wanna say thanks a lot. It's your idea here that make me wanna use my jigsaw again. Awesome 👍👍👍
if you are cutting a piece of wood with a line drawn where you want the cut, how can you see the line?
I was thinking the same thing.
when you lift the top to insert the wood you should be able to line it up with the cut line on the base. it might not be 100% accurate but it's close. Im just guessing though :)
Better used a see-through plastic board for this project to see the line you are cutting.
How about looking down the hole at the end of the cut on the jig which is in line with the edge of the boeard
you're a genius!!! Thank you so much for sharing your project with the world :) Cheers from Germany!