Durafly (PNF) MFX Racer 715/815mm EPO (Green) From HobbyKing | Maiden Flight
HTML-код
- Опубликовано: 26 авг 2024
- hobbyking.com/...
This is the maiden flight of the Durafly MFX Racer 31” from HOBBYKING. This little guy is a rocket ship!! Excellent flight characteristics, whether slow or very fast. Easy to transport, and assemble for on the go flying.
After the success of the EFX Racer, it was decided to produce a mini version, as they say, all good things also come in small packages, so the MFX Racer was born. The MFX has been designed to the same exacting standards as its bigger brothers and still offers speed, strength, agility, and the stability you have come to expect from a Durafly model. In addition, you get the simplicity of assembly and the quality that only an EPO model from Durafly can offer.
With a minimal part count and assembly time, the MFX Racer simply clips and screws together in less time than it takes to charge a battery. The MFX Racer on its 4S setup is fast, but it still feels exceptionally stable and gives the pilot that locked-in feel. Yet unlike most speed machines, it also has exceptionally good slow-speed handling. With its 4-channel control, the MFX Racer is also very aerobatic, with big loops, fast rolls, knife edge, snaps, and spins, the MFX Racer can do them all and more, its only limit is you the pilot! The MFX has 2 wingtip options (both are supplied in the box), a standard 815mm option, or the 715mm clipped wing option. The standard wing setup gives a much better climb rate, whilst the clipped wing setup dramatically increases the roll rate.
Being "Plug N Fly" it is supplied with the following pre-installed components, a 2212-2200KV brushless outrunner motor, Aerostar G2 30A ESC, 2 x 8g MG servos, and 2 x 5g MG servos. Also supplied are a 5x5 prop, spinner, linkages, screws, and a decal sheet with race numbers, etc.
The MFX Racer is a small model with an exceptional pedigree, it flies with incredible precision and has loads of control authority for exceptional aerobatics. The MFX Racer is an excellent fun model that also has a great turn of speed, it will excite and put a big smile on the face of the pilot and spectators alike!
Features:
• Supplied "Plug N Fly" with motor, ESC, and metal-geared servos
• Minimal parts count means it offers a fast build time
• Its EFX pedigree means it is fast and agile
• Has excellent low-speed handling for smooth, safe, landings
• Suitable for intermediate, and experienced pilots
• Manufactured in tough, lightweight, EPO foam
• Includes a colorful decal sheet including race numbers
Specs:
Type: Durafly (PNF) MFX Racer
Wingspan (Standard): 815mm (32.1")
Wingspan (Clipped): 715mm (28.1")
Length: 566mm (22.3")
All Up Weight: Approx 320g (11.29oz) depending on battery used
Weight (no battery): 230g (8.11oz)
Motor: 2212-2200kv brushless outrunner (pre-installed)
ESC: Aerostar 30A G2 brushless (pre-installed)
Servo: 2 x 8g metal geared, 2 x 5g metal-geared (pre-installed)
Prop: 5x5E (included)
Controls: 4 Channel (Throttle, Ailerons, Elevator, Rudder)
Color: Green
Recommended Battery (not supplied): 800~850mAh 4S (14.8V) 25C or higher LiPo
Included:
1 x Durafly MFX Racer airframe (Green)
1 x 2212-2200KV brushless motor
1 x Aerostar G2 30A brushless ESC
2 x 8g metal-geared servo
2 x 5g metal-geared servo
1 x 5x5E propeller
1 x Decal sheet
1 x Accessory pack
Required:
4ch (or more) transmitter with a small, compact receiver
800~850mAh 4S (14.8V) 25C or higher LiPo battery
Suitable LiPo charger
#rcplane #hobbyking #durafly
Get yours here: hobbyking.com/en_us/durafly-pnf-mfx-racer-715-815mm-epo-green.html?affiliate_code=BCXJZWQPHCOKKYP&_asc=9395805962
Thing flys mint 👌🏼
Yes sir it does!! Thanks for watching brother👊🏼👊🏼
That little booger flys like perfection right out of the box! Gentle slow flying when you NEED it and Maximum Overdrive when you WANT it! Just super super fun plane that can hang with most ducted fan jets and also out run some ducted fan jets! For the price you get WAY more than what you would expect. My new fav! Hands off Jeff…. Get your own!😁😁😵💫😵💫
That lil sucker screams! We flew ours earlier this week...super stable. Great flying and filming gentlemen!
Thanks Adam!! I definitely is a screamer and a great flying plane at slow speeds as well. Thanks for the support👊🏼👊🏼
Wow have to get my hands on one. Great video guys 👍👍👍
Thank you sir👊🏼🤣
👍🤠
Its a great design. I think its faster than the goblin, plus the goblin's torque roll when you launch it is terrifying. As to the gliding, remember this design is made to slope soar. With the winglets on its gonna glide and be more stable. I want to see someone pylon race it without them. It should be able to turn and burn inside a baseball diamond.
My guess is its doing at least 120. Its gonna need a brave soul with a radar gun to measure it.
Thanks for watching brother!! We’re gonna get a speed check soon👊🏼👊🏼
Like its big brother the EFxtra, fast as a bullet but flys slow and stable to
Yes sir, thanks for watching 👊🏼👊🏼
To the camera man. It's a hard plane to track at full throttle 😂
Your telling me, the cameraman on this one, it definitely rips 👊🏼👊🏼
I wonder how this flight experience compares with the V900?
Can’t say but this one flys fantastic 👊🏼👊🏼
HI JEFF AND WAYNE. WOW THIS IS DEFINITELY A BIT SMALLER THAN IM USE TO SEEING YOU REVIEW. THANKS LOADS FOR THIS REVIEW. LARGE PLANE'S ARE AMAZING. JUST ASHAME NOT IN EVERYONES BUDGET. TAKE CARE AND LOOKING FORWARD TO YOUR WEEKLY LIVE STREAM.
youtube.com/@jeffscustomrc?si=Ud56X39n2OndKLHf
JEFF'S CUSTOMS RUclips CHANNEL FOR A BRILLIANT LIVE STREAM ON TUESDAY EVENINGS,🇬🇧🇺🇲🇨🇦🇦🇺❤️🙏🏼
Thanks so much buddy!! You can get the bigger version, the EFX, at HobbyKing as well 👊🏼👊🏼
@@JeffsCustomRC THANKS JEFF LOOKS LIKE FUN 🇺🇲👍🏼