Took a BIG Risk Buying This For My Car!
HTML-код
- Опубликовано: 23 авг 2024
- Thank you for watching!!!
If you have any tips or suggestions, please LIKE, SUBSCRIBE, and COMMENT down below to help others and including myself to possibly receive a better understanding. If you enjoyed the video, please tell the community what your thoughts were! Maybe received an idea for your build? Let us know!
SHORTY HEADERS: www.ebay.com/i...
📽: IPhone 11/ GOPRO HERO 7
VEHICLE:
* 2014 Mustang 3.7
SOCIAL MEDIA:
* Instagram📸: instagram.com/
looggaannn?igshid=1c4shh8uel1oi
*TIK TOK🎥: vm.tiktok.com/...
CREDITS:
Music🎵: Personal
Clips🎬:
DISCLAIMER** (This video is for learning/entertainment purposes only. I Logan S, are not responsible/ liable for any loss, injury, damages or actions taken on the users behalf. This video including past, present, and future are through my OWN experiences and I am extending it to give an individual a boost of assistance towards any questions or ideas for watching the video(s). No information contained in this video shall create any expressed or implied guarantee/promise of any particular result. Do at your own risk!)
⚠️NOT A SPONSORED VIDEO⚠️
THANK YOU FOR WATCHING!
* LIKE AND SUBSCRIBE!👍
* LEAVE A COMMENT DOWN BELOW!
* SHARE THIS VIDEO!📩
* 🚨TURN ON POST NOTIFICATIONS🚨
MODS:
UMI Panhard bar
UMI rear lower control arms
Megan racing front strut tower brace
Adventus 20in rims all around 275/30/20 rear, 245/35/20 front
Gt500 spoiler
Carbon Gurney flap
Custom rear diffuser
LED front and rear side marker lights
Custom designed taillights
Rear decklid emblem painted black
Rear carbon reflectors
Lower rear bumper Plasti dipped
Carbon gurney flap
Shorty antenna
Rear window spoiler painted Oxford white
Winndow rain guards
Calipers painted red
Rear Sway bar painted red
Raceland Coilovers
Spiked lugs
Spike valve stem
R1 Concepts slotted rotors all around with ceramic brake pads
Custom side skirts
Roush front lip painted Oxford white with dress up hardware all around
Custom front splitter with rods
Gt500 Upper grille
Custom lower grille
Custom LED fog lights
Custom white mud laps (for looks; no purpose really)
White LED front turn signal lights
INTERIOR:
Carbon dash
Carbon shifter
Carbon seat belt cover
Rear seat carbon panels
Carbon headlight switch cover
Carbon door handle covers
Carbon accents all along the doors
Door locks are bullet shells painted black
Dash and center console painted white with black accents (deleted chrome)
LED lights around dash
Lights under dash near foot area
Bride seat belt covers
Phoenix Auto 12in touch screen
ENGINE:
Diablo i3 91 Octane tune
HPS/K&N Cold air intake
Engine components painted some
Flow master muffler w/chrome tips
Ebay shorty Headers
Ebay throttle body spacer
Pedal Commander Авто/Мото
WHERE TO BUY 💰:
Link is in this video’s bio*
The burning was the coat that comes from the factory from the headers , mine smoked as well
I have those same headers. Took me all day. Lol. Also have resonator delete, factory x-pipe, and Roush axle back. Check it out! Your car is clean 💯
Nice! Felt like it took us all day as well. 😂
Bro , get an MPT 91/93 octane PRX tune , then u will notice a huge difference 👍
I’ve watched some videos and read some forums on that and people have said the same thing. I would like too and it looks sick, but as of right now, I have other plans I would like to accomplish with the car
Do you have MPT?
@@LoganScott. , Yes 👍, i have a 2015 3.7L 6r80 convertible, Currently i have a k&n airfilter drop in , x pipe/resonator delete and a muffler delete , I also have a MPT 91 oct PRX tune with transmission tuning. I just uninstalled it to save gas money but with the tune on , its a very fun quick car, the 11 - 14 s197 3.7s have weak driveshafts so you wana avoid going over 120 , but the best few upgrades id 1st recommend if u wan really be competitive even against 5.0s , is get a 1 piece aluminum driveshaft, upgrade to 3.73 ford racing gears and then choice either an MPT /AMR / or Ortiz performance tune for it. Those are big 3 tuners right now for the 3.7. Id highly recommend you join the 3.7L cyclone facebook group , all the tuners are on there and people with 600whp turbo 3.7s , procharged 3.7s and nitrous 3.7s , few run 10s in the 1/4 mile and a few have been 9s in the 1/4 mile. I also recommend subscribing to Auto mafia racings youtube channel 👍
@@thelifeofjp1996 what does the prx does?
I have 91 prx tune and I agree
I bought these 2 years ago and I run my car hard they have lasted the test of time. I also bought and xpipe off eBay as well and never going back. I bought a 5.0 throttle body off eBay..and a DNA 3in intake.. out here making RTs on cheap knock offs 😂
Honestly, thinking of it, I haven’t had any issues with some of the eBay mods I’ve added to the car. As long as you do your homework, things more than likely will work out in your favor. 😎
@@LoganScott. definitely, and I'd rather be out $50 bucks than $300+
Bro so you can put the 5.0 throttle body on the 3.7? Interesting. Why was the header smoking tho?
@@dannyphantom907 yes the 5.0 throttle bottle is the same diameter as a the diameter of the 3.7 intake manifold. You just need an adapter.
@@dannyphantom907 the headers smoke because they are new.. burning of the outside coating..
If you decided to go muffler delete, it’ll sound more aggressive. Or pair it with roush axle backs
I would love a pair of roush axel backs but they’ll a little too pricey for me atm.
@@LoganScott. I totally understand. There’s these ones on eBay called trident motorsport axle backs that are very similar to roush . They go for about $280-$300
Thanks for the feedback! I’ll have to check them out!
I can vouch here with roush backs and the bbk rep/eBay headers it sounds very good
No way too raspy..
I've got those with no cats and a bigger h pipe and flowmaster mufflers and it sounds pretty nasty
can i hear a sound clip on the gram
Did you still have the stock
Down pipe ?
I have no cats because they blew out from the popcorn tune so na I replaced the downpipe too but I'd suggest keeping them if there still good cuz it's rowdy past 3000 rpm even with mufflers
Definitely gonna get some of these. I have a 2016 3.7
Did you get them?
Hey I’m new to your channel I drive a 14 3.7 to love the build man I’ve been really thinking about the shorty headers and also what touch screen radio do you have
I appreciate it man! Welcome to the channel! The radio Is a Phoenix automotive 12in touchscreen painted white around the plastic trim. They range from $400+ but definitely an upgrade compared to the calculator Ford equipped the mustang with. I’ll be making a video on it at some point!
@@LoganScott. do you have Snapchat I can show you what what I did with my car I did red instead of white but I like the flat look of yours mine is carbon
@@LoganScott.LMAO CALCULATOR🤣🤣🤣🤣
The oils from your hands and fingerprints will make the change colors. Gloves are usually used.
True!
these looks exactly like bbk shorty headers too. i have a custom x pipe on mine from a local shop & flowmaster 40s. i wanna get headers too but the one from AM is too expensive lol
They work exactly like them too haha. Everything is overpriced now unfortunately. Best thing I would recommend to save a quick buck is to download coupon savings downloads to your bowser as in honey, retail me not, etc. Do your hw across all websites as well. Just because something is cheap, doesn’t mean it will be great and same goes for expensive items too. Best of luck Jetta 🫡
Should’ve got a tune first. Get with the right tuning company and they’ll retune you for free as you mod you’re car. Only thing these cars need is tune, 3.73 gears or higher, ported intake manifolds, and drop in intake. I got all that and shorty headers, shorty headers are just for deeper tone. Not really any hp gain. CAI and throttle body and throttle body spacers are a waste.
Thanks for the feed back! You’re right about the throttle body spacer. Not much of anything but a fun little mod. I have a Diablo tune on the car atm but I wish I would have went a different route. Nothing wrong with the tune I have now but it’s limited if you know what I mean. Maybe one day I’ll change it but I’m not too concerned over it
I have 2014 convertible 3.7 and I decided to stay stock it's super quiet almost as quiet as a prius I wanted something loud but driving with the top down is just a headache
I forgot what it sounds like stock haha
Autos don’t pop - Be careful of the heat they trap. Might need to wrap them to save your hood paint.
Bruhh this sounds good 🔥🔥
To an extent haha. Thanks man!
I got a 16 3.7 and got the bbk shortys and they do sound good paired with a catback exhaust
I’ve watched a couple of videos and I agree. The right set up will really give you that deep throaty sound you’re looking for!
@@LoganScott. Borla S Type is a great option, anyhow good stuff man
Thanks for the info Gustavo! Always liked Borla and wish that would have been my first option. I was a “man on a budget” 4 years ago lol
I got shorty headers, high flow cats, x-pipe and muffler delete😭 I hate it but I love the cold start🥰, I felt the torque loss so bad, put the stock mufflers back and the torque came back.
That sounded like a mess lmao! They do sound great at cold start till you start easing on the gas. Can relate
I did that for awhile to then I switched to a h pipe it sounds way better and you get your tourque I'm catless as well
After watching a video of this person with them been open showing the difference in oem mufflers of the 4cyl mustang and the V8 5.0 and another video of the 3.7 V6 muffler, I've got myself a pair of 2018 5.0 GT oem mufflers, and it makes sense to me🤔, those GT 5.0 oem mufflers are made for a car that had 420 hp and can candle more, so it is obvious that it will definitely handle my HP and they will be loud with the setup that I have already.
Mustang ecoboost oem mufflers ruclips.net/video/tlkZTLh0uIA/видео.html
Mustang GT 5.0 resonator ruclips.net/video/l4RZPqrqoAQ/видео.html
I have the same car, but i got it with bbk long tube headers. But I cant get my emissions monitors set for inspection in Massachusetts for shit with long tubes, so I'm thinking of switching to shorties. Did you have any issues with your o2 sensors getting ready?
To be honest, I had a minor set back. At first no, then I ran into an issue with the monitors not being set. I found out me tuning my car back to 91 prevented the light from coming back on. Others haven’t had this issue as I’m aware of but it could be just a me thing you know?
mine leaks shop said its bad welds but they used gaskets which came with and i hope its just the gaskets
I didn’t use the gaskets that came with it because they didn’t look quality in my opinion. I re-used the OEM gaskets
Wish I had a buddy who could help me install it , shops don't know shit and I still gotta pay em to get it fixed again lol
are you still using the shorty headers? and how is the out come of them? thinking of buying a pair for my mustang instead of the bbk.
Works perfectly. No issues from how ever long the shorty headers video was.
cool video! do you still have these same headers and would you recommend?
Thanks Plato! Yes, I do have them still and they work great! I re-used the OEM gasket because I personally didn’t like the one provided.
I just put mine on yesterday and it’s really worth the price tbh
Awesome my man! Tell me how they’re in a few weeks!!
I gotcha bro some of the clips on my channel if you tryna check it out
whats up bro, finailly found a channel with the same car as me. After this long, has there been any issues with them? any exhaust leak
Hey Joe, thanks for stopping by! I haven’t had any issues with them since the day I bought them. I had my CEL turn on a few times for a “heated 02 sensor” but turned off on its own overtime. Not sure if it had anything to do with the headers.
@@LoganScott. Right on bro thanks for replying. Lookin to get these and hopefully install em soon.
BRO IS WEARING A LAWRENCE SHIRT?! YOU IN LV???
Whats that ticking noise??? My stang makes the that too but a lot slower
I’ve always had it. My guess is it’s lifter tick. It’s never caused me any issues so I never worry about it.
Why not long tube headers besides the price difference
Emissions or else I would have went that route :/
So did you use the oem header gaskets?
Yes
Dorman 03133 if you want the right studs for the collector to catalytic converter.
Thank you!
How are they holding up here later?
Great!
You should get a rotrex c38-61 supercharger on that bad boy
Would love too, but my wallet is looking kinda hungry atm haha
@@LoganScott. hey man, it’s like legos. Save up one mod at a time 😅😅. I just got a new omp steering wheel, finally installing my tubular front clip, about to install the back half of my roll cage tomorrow, and built my differential with a torsen and 4.56 gears back in January, everything all by myself! Doing the labor yourself isn’t always going to be perfect (not always a failure either) but it will always save you money
Wheels ???
Bro awesome car 🤤🤍
Thanks!
M10 and 1.5 55ml screw size?
I don’t remember tbr with you
Hey where did you get the mustang toy
Amazon!
The link to the headers isn’t working. Would you mind linking me the link to the headers
Looks like the seller removed the listing. I checked Amazon and found one very similar. It says “won’t fit a 2014 mustang” but it looks like the same design and the questions section mentions it’s for a Ford 3.7. You’re more than welcome to look into it but the is purchase at your own risk! I didn’t buy my headers from Amazon so it will be best to further look into it and see if it’s doable
DNA Motoring HDS-FM11-37L-SHORTY Stainless Steel Exhaust Header Manifold a.co/d/eHOVFQ9
Which flowmaster muffler?
I don’t remember tbh. It may be in my bio under each video
have your intake tempatures changed? or any other temps changed after getting these headers installed?
Nope. All normal
How are they running
Great! No issues
Bolt size flange to header
I’m not 100% sure tbh. I brought the bolt with me to Home Depot (not the best place to use flange bolts)
@@LoganScott. received thanks for the response
Once they're installed you'll never see them. Who gives a shit what they look like? And a six is lots of fun on the street. V8s are great as well.
They look 100x better than the manifolds. Idc if they turn purple 😂
@@LoganScott. Me neither.
😎
What kind of wheels do you have?
Adventus 245/35/20 front and 275/30/20 rear. Unsure the model tbh
No worries bro. Love your car, hope mine looks like that one day lol
Greatly appreciated my man! I guarantee it will if you pour your entire heart and dedication towards it! I want to look up to you one day 🤟. Looking forward to hearing from you in future videos!
where can i get that diffuser bro?
It’s custom out of 0.25 abs plastic
@@LoganScott. thank you bro ima try to get some like that for mine lol
No problem man! It’s pretty straight forward. Highly recommend the proper power tools. Also, I have a video on building a diffuser as well on my page if you’re interested in checking it out!
@@LoganScott. ohh damn yeah ill look for it bro ill follow you on IG good looks G!
Have link to headers ?
Yes! Link just posted in the description 👍
In my opinion, it needs an H-pipe.
What Lowering Springs do you have?
@@henrygarcia7921 I’m on Raceland classic Coilovers with a 1.75 in drop in the front and a 2.75 in drop in the rear. Tire size 245/35/20 (front) and 275/30/20 (rear).
It’ll definitely give it a deeper tone. I have a 3in catback exhaust on my 3.7 on my channel. Comes with a H pipe, really loud but I love it and so do others. Nice video too 👍🏾.
@@darkrose5.0 I’ll have to watch your video later today!
@@LoganScott. Hey Logan did your flange ball on header match up and fit with your catalyst converter socket because that a common area where it leak at.
$499 for BBK headers now bro
Damn, price went up 📈
lol I got a 5.0 can’t relate
lol I swapped a 10.0 can’t relate
Bro I ordered those exact same headers too off of eBay wtf😭😭
I love them! Look and feel way better than the OEM ones
Dang I want to put mine on already but i haven’t had any time, have yours started rusting yet or nah?
You have link ?
Shorty headers give you no performance gain , aside from sound that's about all you will get
I didn’t feel much as time went on, but did feel a very minimal amount of torque increase + sound as you said.
I can't believe you bought and installed headers just to make it sound different and that is all you care about???
Please try and speak, using sentences with just one noun, action and idea per sentence. Whether by sheer speed or volume, you seem to need to jam 3 separate sentences in each sentence 🤷