Это видео недоступно.
Сожалеем об этом.
How To Polish & Wax Your Stained Glass in One Easy Step
HTML-код
- Опубликовано: 16 авг 2024
- Polishing & Waxing your stained glass solder lines is essential to the life of your piece. But it takes for freakin' ever! Learn how I combine the two into one easy step with my polish & wax recipe.
Note: If you're doing patina, you'll only want to use wax. Polish will take the patina off in spots.
If ya need wax or whiting, I have them in my online shop for ya here: www.mountainwo...
For a list of all the essential tools & supplies you'll need to get started, the 7 steps in stained glass, & free patterns...
get your Beginner's Guide to Stained Glass
Get it here (it's FREE): www.mountainwo...
Ready for a Stained Glass Class? I'll teach you step-by-step how to make your first stained glass piece. www.mountainwo...
Find all my Favorite Tools & Supplies here: www.mountainwo...
00:00 Opening
00:05 Intro
00:30 One Step Polish/Wax Recipe
01:09 Application
01:45 Buffing
02:29 Polishing Edges
02:39 Cleaning Glass
02:49 Removing Stuck Wax & Polish
02:53 Outro
Thank you, thank you, thank you!
I believe I feel similarly about polishing & waxing my pieces.
This method is awesome and saves quite a bit of time... And, is even a tad more enjoyable than traditional polish and wax.
Very much appreciated your tip. 💜
😀Yaaaaaaay! Agreed. Still my least fav step of the process, but less bad!🥰
This was super helpful and easy to follow! Thanks for a great video
Yay! Thank you! I'm always happy to help. Let me know if ya have any other stained glass questions😀
Lovely ❤
Thank you!!😀💕
Hey thanks so much for this wish I would have done this first!!! Used some old glass polish on some pieces now I got a big problem!!! It’s been over a week now and it’s dried on in places like glue can’t even scrap off with tooth pick!!! Calling on any and all advice help what can I do to save my pieces?
Oh no! I have a couple of ideas.
If ya forgot about it for a week and it dried on the whole piece all crusty, then in small test spots on the back:
I'd put a cloth with warm water for a bit and see if it remoisturizes it.
Or, put a bit of polish on again, let it there for a few minutes and see if it gets the undercoating uncrusty.
If all else fails, you can use 0000 brass wool. It will dull the solder a bit cuz it puts some micro-scratches in it, but if you plan to patina, you won't notice that.
If it's just some crusty leftover spots in the corners on the glass, then you can scrape it off with an X-acto knife.
Lemme know how it goes!
This is for if you don’t patina the solder correct? I have just used it when I don’t use patina. ( without the calcium carbonate.) I brush it off and it shines and protects the solder from oxidizing.
Yup! I only use this mix on plain silver solder lines. The calcium carbonate portion of the mix acts as a polish so you wouldn't want to use it on patina as it would risk removing some of it. If you're doing patina, then you only use the Carnauba to keep the solder from oxidizing.😀
This process is done before the patina or after? Do I do this polish on my zinc edging as well? Thanks! Great video.
Thank you!!🥰Only do the One Step Wax & Polish if you're not doing patina. Different polishes can remove it. If you're going to do patina, after soldering, use a product like Kwik Clean instead of washing it, do the patina, then wash & just use Pure Carnauba Wax. Here's a video on how I do patina😀 ruclips.net/video/FBeQwoR7rTQ/видео.html
Algorithm 😊