I appreciate that there are contents in English. The lack of information that exists in Spanish-speaking content is incredible. I spent the whole night repeating and repeating the process of installing everything about 10 times because they omitted to remove the screen. Well, anyway, I now have my powerful Ender 2 Pro functional with klipper. I thank you millions. PS: I'm sorry if you barely understand me, I'm using the translator.
Yes, I would like to see what comes after the Klipper install. I'll be putting Klipper on my mostly stock OG Ender 3 this coming week and want to have as much information about how to finish the config as possible. And thanks for doing this. You have the most understandable video this 80 year old has found yet.
Thanks for the feedback, I'm glad to hear that you've found my video helpful. I plan on having a video come out Thursday or Friday with some tips on what to do after you've got Klipper installed.
Much thanks for the install video! I was able to get it running on the RP Zero W. (Not Zero 2) I ran into some issues with the Z stepper configs as i don't have a BL touch yet (coming from Aliexpress) Video suggestion - HOW TO INSTALL BL TOUCH AND CONFIGURE KLIPPER SETTINGS FOR SEAMLESS BEDLEVELING! Tytyty.
Thanke you for this Video. You help me verry good by install my Printer with Klipper. I understand all without a Translator. Many greetings from Germany
Thank you so much! I've successfully installed Klipper on my Ender 3 Pro and now it's almost like the Bambu Lab A1 (maybe I'm a bit exaggerating). You've helped me a lot.
Note: 12:56 must be same as you showing, if not not worked, and for me for some reason maybe is the printer.config file that i get from internet but i have to follow from klipper docs. RPi as a secondary MCU to work
Hello, you make ot seem so smooth. I keep getting an MCU error and I've tried remaking my Kilpper Software 3 times. Third time was as you explained not enabling "extra low level" and still get the mcu error. But when i check on putty to see if i get the usb connection it shows i do. What could I be doing wrong... Oh yeah I also tried unplugging the screen as you recommend and nothing... 😢
hi mate!, after doing all step by step at the end Klipper reports show STARTUP (in blue color) but it said "printer is not ready, klippy host software is attempting to conect retry in a few.." I have an ender3 upgraded with board4.2.7 as you. Could anyone help me o send a reference documentation where I can study. I will really apreciate it
Try this config file, but just make sure the board version matches yours: github.com/Klipper3d/klipper/blob/master/config/printer-creality-ender3-s1-2021.cfg
Hello, thanks! Yes, it sure can, it's what I used for my CR-5 Pro H. However, since there's less support for it and no Raspberry Pi imager utility, the setup is a little more involved, but not terribly difficult. 3D Nero did a great video on how to get it done: ruclips.net/video/Dh6bEB6iYa8/видео.html
It can work on a Pi Zero W, but it's not recommended since many people have had issues with slowness and potential print artifacts due to the slower speeds of the Pi Zero. A Zero 2 W or Pi 3 and above are ideal.
Beware: Have made the switch to Klipper on my CoreXY machine.. However, I can't get the webcams working, not even one of the two.. (I used crowsnest) I think the pi zero 2W might have a too small bandwidth for that.. Followed some webcam guides on the web for setting up webcams, but to no avail.. (I can see the webcam window, but it's empty. It does however show 15 fps) Have to switch back to Marlin for now I'm affraid..
@@sandmanlolTry a pi 3 or 4. I'm using a pi 4 now and have no issues with webcams.. Also, one webcam I used with Marlin/Octopi was not recognized by klipper, an other one did the trick
You will definitely run into webcam issues with Zero2W. I just swapped my ender 3 octoprint setup from a pi4b to a pizero2w and have had many issues running more than one serial device (ie. the printer and webcam) at the same time. I've tried different usb hubs, but have not been successful.
I appreciate that there are contents in English. The lack of information that exists in Spanish-speaking content is incredible. I spent the whole night repeating and repeating the process of installing everything about 10 times because they omitted to remove the screen. Well, anyway, I now have my powerful Ender 2 Pro functional with klipper. I thank you millions.
PS: I'm sorry if you barely understand me, I'm using the translator.
Yes, I would like to see what comes after the Klipper install. I'll be putting Klipper on my mostly stock OG Ender 3 this coming week and want to have as much information about how to finish the config as possible. And thanks for doing this. You have the most understandable video this 80 year old has found yet.
Thanks for the feedback, I'm glad to hear that you've found my video helpful. I plan on having a video come out Thursday or Friday with some tips on what to do after you've got Klipper installed.
ender3s1 just install successful, thank you! tips: make sure all the cable can sync data.
Much thanks for the install video! I was able to get it running on the RP Zero W. (Not Zero 2)
I ran into some issues with the Z stepper configs as i don't have a BL touch yet (coming from Aliexpress) Video suggestion - HOW TO INSTALL BL TOUCH AND CONFIGURE KLIPPER SETTINGS FOR SEAMLESS BEDLEVELING!
Tytyty.
Thanke you for this Video. You help me verry good by install my Printer with Klipper. I understand all without a Translator.
Many greetings from Germany
Great video, thanks for showing examples of the issues and not having edited them!
Thanks for the feedback!
Thank you so much! I've successfully installed Klipper on my Ender 3 Pro and now it's almost like the Bambu Lab A1 (maybe I'm a bit exaggerating). You've helped me a lot.
do you have any data to assist me please. i'm front of problem with my ender3 pro, i cannot connect it
@@pausecafe8533i just set up klipper from scratch for my 2nd ender series printer. Do you still need help?
Mate, thank you so much!
Easy to understand and straight to the point, kudos to you!
Use full video thanks.. plz make full guidelines video to attach adxl345 to pi z2 w..
Wow Thanks a lot. First try and it run like... ;) Good Job
We want more stuff with klipper and ender3. Thks fella
I do plan on it! I've got a break from work coming up in a few weeks, so I will likely be able to film some more Klipper-related vids.
@@FoulNews Have fun! thank you!
Enjoy!
@@Rafael-xy5ti Thanks!
Note: 12:56 must be same as you showing, if not not worked, and for me for some reason maybe is the printer.config file that i get from internet but i have to follow from klipper docs. RPi as a secondary MCU to work
Hello, you make ot seem so smooth. I keep getting an MCU error and I've tried remaking my Kilpper Software 3 times. Third time was as you explained not enabling "extra low level" and still get the mcu error. But when i check on putty to see if i get the usb connection it shows i do. What could I be doing wrong... Oh yeah I also tried unplugging the screen as you recommend and nothing... 😢
Can you please share how you moved control board outside ender printer?
hi mate!, after doing all step by step at the end Klipper reports show STARTUP (in blue color) but it said "printer is not ready, klippy host software is attempting to conect retry in a few.." I have an ender3 upgraded with board4.2.7 as you. Could anyone help me o send a reference documentation where I can study. I will really apreciate it
solved! I had to rebuild the klipper.bin, I made a mistake setting connexion parameters. Now its connected properly
i cant get core ftp to connect neither port 22 or port 21 are working what do I do?
hello i have connection with pi 2 zero, but i do have have connection with printer, only difference i see is the klipper.bin file doesnt have a logo
5:42
this for video foul news can you help me i want printer.conf for ender 3 s1 pro .... can give me link plz
Try this config file, but just make sure the board version matches yours: github.com/Klipper3d/klipper/blob/master/config/printer-creality-ender3-s1-2021.cfg
Wich file can i use 4 the ender 7 🤔
F#cking love the t-shirt
Hello, great video. Do you know if klipper can be installed on a orange pi zero 2w?
Hello, thanks! Yes, it sure can, it's what I used for my CR-5 Pro H. However, since there's less support for it and no Raspberry Pi imager utility, the setup is a little more involved, but not terribly difficult. 3D Nero did a great video on how to get it done: ruclips.net/video/Dh6bEB6iYa8/видео.html
No me sale ningún archivo cuando voy a transferir el klipper.bin a la sd
I have a pi zero-w… will this work? Also interested to add a klipper screen to a 3.5 inch touch screen if possible. Thanks 🙏 ❤
It can work on a Pi Zero W, but it's not recommended since many people have had issues with slowness and potential print artifacts due to the slower speeds of the Pi Zero. A Zero 2 W or Pi 3 and above are ideal.
Why are zero 2 w's still sold out everywhere? Really disappointing. Most other products have caught up post covid and are actually in surplus.
I have a Ender 7 corexy so which file can i use 4 tis machine 🤔
This seems like a good starting point: github.com/johnson-thomas/Creality-Ender7-Klipper-Starter-Pack/blob/main/printer.cfg
WoW thanks 👍
@@frits183 No prob! Good luck with the install.
That shirt speaks to me.
Beware:
Have made the switch to Klipper on my CoreXY machine.. However, I can't get the webcams working, not even one of the two.. (I used crowsnest)
I think the pi zero 2W might have a too small bandwidth for that.. Followed some webcam guides on the web for setting up webcams, but to no avail..
(I can see the webcam window, but it's empty. It does however show 15 fps)
Have to switch back to Marlin for now I'm affraid..
i'm going through the same and it's driving me crazy
@@sandmanlolTry a pi 3 or 4. I'm using a pi 4 now and have no issues with webcams.. Also, one webcam I used with Marlin/Octopi was not recognized by klipper, an other one did the trick
@@winandd8649 crowsnest can make things a little awkward, i had issues with my RPi 4 and a usb webcam
@@winandd8649 yea I might have to just to bypass the hassle
You will definitely run into webcam issues with Zero2W. I just swapped my ender 3 octoprint setup from a pi4b to a pizero2w and have had many issues running more than one serial device (ie. the printer and webcam) at the same time. I've tried different usb hubs, but have not been successful.
Is it weird that I'm staring at your eyebrows?
They're there just to distract you from what's in the background.
@@FoulNews LOL 🤣🤣
The easiest way is a mks skipr 😝
If you don't include wiring in the new board and making sure all the steppers are wired correctly, then yes lol
kinda fit
kinda fat
kinda my type 😋
Not sure if this video about ender3 or x1c. So gay.
All you'd have to do is watch the video and you'll be able to tell.
Let’s goooo
I tried flashing it once or twice now but it doesn’t connect to my wifi at all 🥲, what am I supposed to do now?