I am a chartered accountant by profession living in the UK but I am slowly becoming a computer expert just because of your videos. I will start buying disposed laptops that are damaged in bid to try to fix them. Apart from multi meter, screw drivers and soldering gun, what is the other important equipment that I can buy
Very nice & proper repair, what works very well for me is the use of isopropyl for general cleaning and then the Zippo to improve contacts and leave a tinny protective layer because zippo's oil in self. i remember in some time Sorin used to use this ZIppo on his repairs.. for me was always a good idea !
basically anything that power runs thru will get corroded. always the positve power pins get damaged. best thing to do is remove that battery ASAP.... only then the stupid "rice trick" could work. lol. or better yet just let it sit infront of a fan for a few days. but only if battery is removed. if you are unable to remove battery then bring it somewhere right away.
@tim0steele: Tantalum capacitors withstand the heat caused by hot air very well. Sometimes, like MOVs (metal oxide varistors), they are "carbonized" by sudden voltage spikes (transient). On the other hand, electrolytic capacitors (aluminum body) withstand a maximum temperature of 450 Celsius, in common consumer appliance applications, so it is highly recommended to cover them with Kapton tape or other suitable insulating material, if any are close to the component you want to remove. Northridge posted a video in which one of them exploded on him, fortunately without affecting his personal safety, while he was carrying out Hot Air repair work at a temperature of almost 500 degrees Celsius. All the best.
@@CarlosGarcia-d3e Many experts advise against using hot air rework on or near tantalum capacitors due to their sensitivity to high temperatures (according to ChatGPT!). Definitely agree about electrolytic capacitors, they don't like heat at all.
IPA works wonders on corrosion caused by liquid damage. The risk as said is just how long will it continue to work? If there is still unseen damage under the components, then it is just down to your luck regarding the long reliability of the laptop.
You missed your calling. You could have been a Dentist. 🦷Previous videos drilling skills on a "decayed" motherboard, and today (tooth) brush cleaning as well. You could charge more as well.
I personally would have plopped the motherboard in my ultrasonic cleaner immediately. As it is doing its thing, I would have dried the screen\keyboard+case with a fan, much like you did. Then I would have dried the motherboard in my oven at 60c hot air for about 1 hour
I think that Macbook got wet a lot longer than before today. I would not rule out keyboard issues with that much water. Will this user make regular backups of their data? Possible.
SORIN, speaking of waterdammage I felt playing with my quest 3 in the pool for about 1 second, switched it of, dried it, shook it ! Put it in 1 kg of rice, 1 day in the sun but even if it boots no video only the welcome sound. I took it apart and didn't,t se waterdammage on the motherboard. Can the water creep under the gpu? Do you think it will work eventually? Greetings from Mexico
i bet you 10 quid the audio does not work, or at the very least the headphone port does not work, i work on this model often (a2337) and water always destroys the little audio io/daughter board. easy fix/replacement. also not a hater, i genuinely think you are the man, i watch daily, 4-5 years or so, your low melt solder paste is amazing also.
Low melt solder (aka "low melt allow") in general is a game changer. I discovered it more than 20 years ago from ZEPHYRTRONICS while learning to rework expensive, prototype PCB's. I've watched techs ruin boards, and make UGLY repairs due to struggling with component removal -- they do not know the secret 😁.
A backup disk costs so much less than £200... Every time I receive a data recovery job I want to scream. If the data was important, why don't you keep a backup? Time Machine is maybe the best feature of MacOS.
That much water and id be like, "Your laptop is dead my friend, forever gone, RIP 💻⚰️🪦!" Sorin is like, "Proper damage, ill have it back to you in 30 minutes or less." 😎
Apple engineer watching this: ENGINEERING MEMO. From now all rubber seals will be removed from all models in production so we can save 1c per unit. This means any level of water damage=dead laptop=customer buys new laptop=we make $$$$. End-Of-Memo.
Not apple engineer, apple bean counter. I have the feeling that engineers here try to do the best job they can, and some idiot in accounting keeps ruining the engineers' work wanting to save that 1c.
Did the customer really pay the 200$ price for cleaning with IPA and a brush? For that price, you could have at least unscrew the touchpad and clean underneath there - it will corrode and cause sudden restarts and kernel panics.
Man, we woulda changed/scrapped half the parts including the screen & hit them up for like $1,000+ bucks lvl4 repair 😂 they don’t clean shit the way you did I had no faith in this thing powering on at all. Even if this lasts a year or two great deal compared to Apple (repair depot) charging you the price of a new laptop for repair
macbooks from nature are attractive to corrosion, also some macbookusers are really weird of what you might find inside the macbooks........L.R. knows all of that.....
No way I would do this for a customer same day. 1) I take picture of damaged areas 2) Throw in ultrasonic cleaner, submerge it in alcohol for 10 mins, let it dry over night in front of fan. I also put the keyboard in front of fan 3) I reflow CD chips 4) Test for problems. I also upsell on bad parts. Usually battery and keyboard dead with this type of spill You forgot to check under heatsink CPU area 😬
Does anyone there in your country puts their water devices inside a sack of rice?? - i know it sounds so stupid but alot of people still cling to this belief.
wow.. working only by cleaning.. proper nice, good from the client to bring laptop for repair same time.. AND NOT SWITHING IT ON!💯👏
Good lesson, never gave guarantee for liquid damage stuff, that they will fails again soon. thank you sir Sorin for today's Lesson. ❤
20 minutes working with IPA will give you the ability to talk a second language 😂
I am a chartered accountant by profession living in the UK but I am slowly becoming a computer expert just because of your videos. I will start buying disposed laptops that are damaged in bid to try to fix them. Apart from multi meter, screw drivers and soldering gun, what is the other important equipment that I can buy
30:20 magic touch, almost made the line go away just by cleaning it!
Nice cleaning Sorin. You are universal.
Outstanding work!
This Macbook is so wet it has fish inside 🐠 🤣🤣
now fish is dyeing
Needs a Barracuda card. Might be a Fail Whale. It's not slow as a snail. I like it like Eye Candy.
Next perfect work, and thank you for describing every step :D
Great work once again Sorin 👌🙂
You sir are the MASTER!
I am so grateful for your videos. Outstanding.
You are the master 👌
Very nice & proper repair, what works very well for me is the use of isopropyl for general cleaning and then the Zippo to improve contacts and leave a tinny protective layer because zippo's oil in self. i remember in some time Sorin used to use this ZIppo on his repairs.. for me was always a good idea !
@@paulojarasantibanez6391 what is “zippo” ? thanks
Good job mate
i fixed so many liquid damaged boards like this.... however this is the first im hearing about liquid rosin for the solder joints under the chips.
time is critical. because that corrosion is basically rust, and it will rust away the solder and then finding fault becomes a needle in haystack lol
basically anything that power runs thru will get corroded. always the positve power pins get damaged. best thing to do is remove that battery ASAP.... only then the stupid "rice trick" could work. lol. or better yet just let it sit infront of a fan for a few days. but only if battery is removed. if you are unable to remove battery then bring it somewhere right away.
Maybe ultrasonic will dissolve stuff under chips, but then again I've seen Rossmann clean under chips first, be it with sticky liquids..
A good ultra sonic cleaner would be a good thing for you to have.
I'm quite sure that can clean it more.
Linus Sebastian from LMG cleaned some pcbs in a dishwasher. Once they are dried out properly before any voltage is applied they will suffer no damage.
I am learning sir
Smart and lucky costumer💪🏻
That was fresh job.
Straight from Thames river i guess.
ultrasonic cleaning of that board, would that help?
I have a heater exactly like the one that Sorin is using to dry the laptop.
The shield that never got soldered back on:
lololol 😂😂😂
It's wise to have an up to date Time Machine backup.
Sorin wat strength of ipa do you use
just through it in a ultra sonic cleaner sorin
Notice the power supply dancing in the background 😂😂😂😂
This is not a repair, this is a cleanup. Just kidding, great job Mr. Sorin!
Come to Besiktas, Sorin...I hope that's water...
Imagine paying for a fix and no parts are replaced it is just scrubbed with a toothbrush 😂
Think you
what chemical you using sir for cleaning????
Rosin my friend this is a perfect job to use WD-40... a non conductive material that repels water and moisture...
Does anyone else enjoy watching this blue corrosion? A nice looking color indeed :))
To me, it all looks GREEN 💵 💵 💵 😂
@@hightttech hahaha
Maybe a good idea to shield the tantalum capacitors from the hot air when removing the metal shield?
@tim0steele: Tantalum capacitors withstand the heat caused by hot air very well. Sometimes, like MOVs (metal oxide varistors), they are "carbonized" by sudden voltage spikes (transient).
On the other hand, electrolytic capacitors (aluminum body) withstand a maximum temperature of 450 Celsius, in common consumer appliance applications, so it is highly recommended to cover them with Kapton tape or other suitable insulating material, if any are close to the component you want to remove.
Northridge posted a video in which one of them exploded on him, fortunately without affecting his personal safety, while he was carrying out Hot Air repair work at a temperature of almost 500 degrees Celsius. All the best.
@@CarlosGarcia-d3e Many experts advise against using hot air rework on or near tantalum capacitors due to their sensitivity to high temperatures (according to ChatGPT!). Definitely agree about electrolytic capacitors, they don't like heat at all.
sir which liquid do we use for the best water-damaged laptop motherboard cleaning.
IPA works wonders on corrosion caused by liquid damage.
The risk as said is just how long will it continue to work?
If there is still unseen damage under the components, then it is just down to your luck
regarding the long reliability of the laptop.
Water damage is the same damage Liquid Metal may cause?
2:54 scratches noggin to find answer lmao
Hello🤝good job 👍👍👍👍👏👏👏👏👋👋👋👋👋
Hey when i power my MacBook only the keyboard show lights that its on but nothing displayed on the screen
my first thought was what exactly was the liquid?
Sorin sir please replay what is difference btw ultra sonic and alcholhol
I want to learn how to fix motherboard, how do I start?
What do I have to learn first?
Same for water damaged GPUs?
Nice product placement... ultraSorin cleaner
You missed your calling. You could have been a Dentist. 🦷Previous videos drilling skills on a "decayed" motherboard, and today (tooth) brush cleaning as well. You could charge more as well.
Sorin's FastFixing
In this case what if we dip parts of board in alot of isopropyl alcohol so the fresh water mixes with it and then evaporates?
I personally would have plopped the motherboard in my ultrasonic cleaner immediately. As it is doing its thing, I would have dried the screen\keyboard+case with a fan, much like you did. Then I would have dried the motherboard in my oven at 60c hot air for about 1 hour
what MacBook air it is ? I see that it is M series, but wat exactly ?
How about restoring the shields with the holes inside ?
26:22 nothing is exploded 😅
I think that Macbook got wet a lot longer than before today. I would not rule out keyboard issues with that much water. Will this user make regular backups of their data? Possible.
Sorin's Power Supply in short-circuit mode on. hahaha. At 15 minutes of the video.
Nobody is using the Power Supply Unit for this repair.
Mystery of the Haunted Workshop
Power supply felt left out, decided to do voltage injection
Would it make sense to attempt a repair after 7 months of the damage? The computer turns on until the apple logo and then restarts...
SORIN, speaking of waterdammage I felt playing with my quest 3 in the pool for about 1 second, switched it of, dried it, shook it ! Put it in 1 kg of rice, 1 day in the sun but even if it boots no video only the welcome sound. I took it apart and didn't,t se waterdammage on the motherboard. Can the water creep under the gpu? Do you think it will work eventually? Greetings from Mexico
You can put it in ultrasonic cleaner ❤
I can believe 👌
Loool today I had exact same Macbook with very similar liquid damage on the motherboard. The macs love water or what hah
nice Work :-)
Your Power Supply's probe was touching, it's outputing current
Omg that thing was just dunked in water
here clean whit ultrasonic and alcohol iso
20:32 ... and *iThink* we're raydee ...
i bet you 10 quid the audio does not work, or at the very least the headphone port does not work, i work on this model often (a2337) and water always destroys the little audio io/daughter board. easy fix/replacement.
also not a hater, i genuinely think you are the man, i watch daily, 4-5 years or so, your low melt solder paste is amazing also.
Low melt solder (aka "low melt allow") in general is a game changer. I discovered it more than 20 years ago from ZEPHYRTRONICS while learning to rework expensive, prototype PCB's. I've watched techs ruin boards, and make UGLY repairs due to struggling with component removal -- they do not know the secret 😁.
"I bet you 10 quid the audio does not work" 27:10
A backup disk costs so much less than £200...
Every time I receive a data recovery job I want to scream. If the data was important, why don't you keep a backup? Time Machine is maybe the best feature of MacOS.
repair by proper calibrated brush..
That much water and id be like, "Your laptop is dead my friend, forever gone, RIP 💻⚰️🪦!"
Sorin is like, "Proper damage, ill have it back to you in 30 minutes or less." 😎
Seriously. Soaking wet! What did they do to it??
Water Cooled !
That was repetitive water damage. Some of that was long term.
This Macbook should have just gotten a proper sea burial
How come you don't put that in an ultrasonic cleaner - it would clean it faster - suggestion only
The frequency of Sorin's ultrasonic cleaner is only 2 Hz.
Pls Intruduction Power supply FNIRSI
It's better to put it on ultrasonic cleaner
Should get yourself an ultrasonic cleaner for jobs like this.
Next Macbook will come in a fish tank.
That thing is toast. Wont last long.
Apple engineer watching this: ENGINEERING MEMO. From now all rubber seals will be removed from all models in production so we can save 1c per unit. This means any level of water damage=dead laptop=customer buys new laptop=we make $$$$. End-Of-Memo.
Not apple engineer, apple bean counter. I have the feeling that engineers here try to do the best job they can, and some idiot in accounting keeps ruining the engineers' work wanting to save that 1c.
That hahaha is 200 pounds 😅❤
Did the customer really pay the 200$ price for cleaning with IPA and a brush? For that price, you could have at least unscrew the touchpad and clean underneath there - it will corrode and cause sudden restarts and kernel panics.
why not just remove the drive and provide the data then?
Man, we woulda changed/scrapped half the parts including the screen & hit them up for like $1,000+ bucks lvl4 repair 😂 they don’t clean shit the way you did I had no faith in this thing powering on at all. Even if this lasts a year or two great deal compared to Apple (repair depot) charging you the price of a new laptop for repair
Brilliantly done Sorin 2 pizzas tonight we’ll done ✅ 😊
macbooks from nature are attractive to corrosion, also some macbookusers are really weird of what you might find inside the macbooks........L.R. knows all of that.....
Why is there not a laptop that can work underwater?
Today I had 😂 a liquid damage to repair, coincidence 😂 .
Well 😢 the screen got bad though but the motherboard is ok 👌 .
wow....today you have ....PPPIIIIZZZZZAAAAA...by the away....nice video....
Cleaning is an action when removing something away...not spreading it all over, I think...you?
No way I would do this for a customer same day.
1) I take picture of damaged areas
2) Throw in ultrasonic cleaner, submerge it in alcohol for 10 mins, let it dry over night in front of fan. I also put the keyboard in front of fan
3) I reflow CD chips
4) Test for problems. I also upsell on bad parts. Usually battery and keyboard dead with this type of spill
You forgot to check under heatsink CPU area 😬
Does anyone there in your country puts their water devices inside a sack of rice?? - i know it sounds so stupid but alot of people still cling to this belief.
staged if you ask me.....not by you sorin but just a guy like to see the video........spilled water on purpose....attended you.......might be.
wow first
Waste of time 😂 any other part can be faulty or become faulty in a very short time !!! Send them to Apple shop 😂