Apple does not fix logic boards at Apple Stores. The £600 quote was for a board replacement (a refurbished one). They keep the broken one, send it to a partner in China to be repaired and then sold again to another customer.
@@465kuba You have 2 options: retail or exchange. £600 pounds is the exchange price, they keep your old motherboard. If you want to keep it, you pay probably around £1000. That's how Apple works.
I wish there were a lesson on what you're seeing/evaluating with shorted tracks within the board. I couldn't tell at all what you were seeing nor what was connected to what.
Sorin please don’t take this the wrong way, but u make me laugh so much, when u remove the chip and short still there, I’m laughing because I know ..bless u man 🙏
They quoted £600 because no one really repairs anything - they just swap out parts. So something dead on the motherboard it's a new motherboard at whatever that costs. Most warranty work involves zero actual repairing (but Im sure you're aware of that ;-))
if its diffused then its on the other side, its gotta be pin point not diffused looking when you bring out the haet monitor gun. that knowledge is works for all boards, well with thicker layers anyway.
Just use hot glue on the speaker. I modified my meter, hot air station and soldering station. You can still hear the the beeping, but it is way more tolerable.
Yeah I've been complaining for a while because it's painful with my hyperacusis, ie, can't get to the volume fast enough. Tape over the hole usually fixes it.
Hi Sorin, thank for this lessons and Happy customer that even with burn layer you save the laptop..y the Multimeter beep Is to high let have video for a volume controller how said laboratorioassembler 😂 bye Francesco Timpano from Florence Italy
Watch north ridge fix he did a few of those repairs but you did an awesome job but repairing a burned layer I’m just wondering what caused the cap to blow it showed the effect but what is the cause could it have been a flaw in the design? Anyway you have a lot of skill
idk if that is correct because 100 watt for mbp? normally it is 60.... maybe that is the original cause of the fault something causing too much power to push through?
there is something fun on Sorin videos he do not like to take out the board 🤣🤣🤣 lol, and whe I'm watching his videos then he find the short and says do you think is in other side of the board?? probable not.! but anyway i like your videos they always trigger a new thinking tricks and that's is awesome.🤝🤝
Apple asked for 600£?!!!...... Then you should charge for 1200£ just for taking the motherboard out No I'm serious i hate Apple so much HOWEVER your work is magnificent Sir GOD BLESS YOU, i always wait for your videos to be uploaded everyday and thank you for all of that work YOU TAUGHT US WELL THANKS A LOT (NO CAPACITOR NO SHORTED CAPACITOR ;)
Almost every logicboard repair video on the A2442 MacBook Pro refers to this circuit of the board and almost always several layers of the board are damaged / burned in this exact area. This has to be some mistake in the board design by Apple.
May God bless you, our teacher. By God, I have a problem with the Toshiba Satellite Pro model R50-B-15J laptop. The problem is that it starts, writes Toshiba, and turns off. I emptied the charge, removed the battery, and put it back in. The same problem remains. I tried to charge the BIOS and restart it. It became a black screen. I restored the old BIOS. Same problem, replaced. I used the flash drive, 32q32, and I charged the old BIOS with it. The same problem remains. Can you help? Thank you.
I ended up with an i5 iMac in a deal a few years back, bad hard drive and Apple wanted several hundred dollars to fix it, I had an SSD in it in less than an hour, and my business partner used it after that.
Nice job. As far as i know apple only change the complete part, so they charge for a complete new motherboard. It is not really a repair but mor of a change 😞
Spoiler alert. Cap replacement: "Size matters" (That's what *she* said). Your replacement cap looks definitively way too small. The size is always in relation to the Farads and to the voltage. You could have measured one of the others beside the exploded first to find out the Farads.
@@Tribes11 Depends'', software/hardware?,,,, The perception of whether Apple products are superior to other tech products is subjective and varies from person to person. Apple products are known for their sleek design, user-friendly interface, and seamless integration across devices. However, the perception of superiority can also be influenced by marketing, brand loyalty, and personal preferences. It's important to consider individual needs and preferences when evaluating the superiority of tech products.
are you kidding me? for such a new mashing, what o you say of me watching this video with my mid 2012 MacBook Pro. I'm really looking to get the M3 MacBook air but I really don't want to encounter issues like that!
Apple does not fix logic boards at Apple Stores. The £600 quote was for a board replacement (a refurbished one). They keep the broken one, send it to a partner in China to be repaired and then sold again to another customer.
If they sell motherboard for 600 than they shoul buy damage motherboard for x
@@465kuba You have 2 options: retail or exchange. £600 pounds is the exchange price, they keep your old motherboard. If you want to keep it, you pay probably around £1000. That's how Apple works.
@@465kuba Apple tech wont even fart on your motherboard under 300 bucks specially if you didn't have Apple Care subscription..
@@leetucker9938 unfortunately, it's true
Apple almost always gives repair price close to cost of new laptop, hoping you just buy a new one.
Sorin tactics brutal sometimes, but he GETS IT DONE 👍. RESPECT.
the choice for replacement capacitor made me chuckle xD
Wow, Perfectly calibrated cut, Lol!
Excellent job Sorin you did great job on the board.you get a proper calibrated pizza 🎉🎉🎉🎉
Job well done Sorin. Another board saved from land fill.
Hello Sorin, as always another excellent and complex work, with that burned track.
I wish there were a lesson on what you're seeing/evaluating with shorted tracks within the board. I couldn't tell at all what you were seeing nor what was connected to what.
13:50 both pads beeps with ground...
16:30 LOL I was blowing air on my screen to help you 😚😚😚
Love watching the master Sorin 😊
At 26:36 the pad is connected with the other capacitor, ok, but it is taking current, so doesn't that mean there is still a short on that line?
Fantastic video Master...such a genius! Thx for sharing the knowladge
Perfect job Sorin. The end good everything good.
perfect approach to save the board
Love your content Mr. Sorin!!!! Wish you were in US and my neighbor!!
😁
Being a bit more gentle with the current inject will help pin point the heat location I guess.
Saved another customer after Apple tried to rip them off. I wouldn't buy an Apple product even if they were the only game in town. 😮
Ar trebui un ucenic sa aveți!
Sorin please don’t take this the wrong way, but u make me laugh so much, when u remove the chip and short still there, I’m laughing because I know ..bless u man 🙏
23:15
@12:30 ...the capacitor looks fine except all the burned and exploded parts.... DOH! 😧 ...Yep, it needs to go
They quoted £600 because no one really repairs anything - they just swap out parts. So something dead on the motherboard it's a new motherboard at whatever that costs. Most warranty work involves zero actual repairing (but Im sure you're aware of that ;-))
if its diffused then its on the other side, its gotta be pin point not diffused looking when you bring out the haet monitor gun. that knowledge is works for all boards, well with thicker layers anyway.
Why is Batterie still Connected while you soldering on the board? And why you remove speaker instead of removing the board?
Thats what they say about solder on over heated hot metal its called crystallized. Wont come apart.
Can you fix the 2017 iMac Pro logic board?
Perfect 👌
Next video: how to create a volume controller for the multimeter's beeper :p
Just use hot glue on the speaker. I modified my meter, hot air station and soldering station. You can still hear the the beeping, but it is way more tolerable.
Yeah I've been complaining for a while because it's painful with my hyperacusis, ie, can't get to the volume fast enough. Tape over the hole usually fixes it.
@@dirzzleme01 talking about sorin's beeper... is killing mi smartphone speaker :) on mine i have placed some tape.
Nice job Sorin , you did excellent job on board .you get a proper calibrated pizza 🎉🎉🎉🎉
My GF hates the beeper in the videos …. Lol
The. She comes downstairs and im beeping away. Rolls her eyes and huffs about
Hi Sorin, thank for this lessons and Happy customer that even with burn layer you save the laptop..y the Multimeter beep Is to high let have video for a volume controller how said laboratorioassembler 😂 bye Francesco Timpano from Florence Italy
Hello sir : is there any problem in board while power plugged in without ic
Watch north ridge fix he did a few of those repairs but you did an awesome job but repairing a burned layer I’m just wondering what caused the cap to blow it showed the effect but what is the cause could it have been a flaw in the design? Anyway you have a lot of skill
Bravo 🎉 you're the best. 🎉🎉🎉
idk if that is correct because 100 watt for mbp? normally it is 60.... maybe that is the original cause of the fault something causing too much power to push through?
Hi, why don‘t you leave the board with no capacitor as usually in the first place?
no capacitor, no short! That's the best phantom calibrated capacitor :D
I could see at first sight of the thermal cam the heat signature is not from ic.
there is something fun on Sorin videos he do not like to take out the board 🤣🤣🤣 lol, and whe I'm watching his videos then he find the short and says do you think is in other side of the board?? probable not.! but anyway i like your videos they always trigger a new thinking tricks and that's is awesome.🤝🤝
Sir which thermal camera are u using pls tell me I am searching for one
Hey sorin! Why don't we stick that meter somewhere since it uses USB cable and put a camera just like the old days
Thats why NR Fix uses big boss for PCB removal whist Alex just does Electronics Component repair.
Good job❤
Apple asked for 600£?!!!...... Then you should charge for 1200£ just for taking the motherboard out
No I'm serious i hate Apple so much HOWEVER your work is magnificent Sir GOD BLESS YOU, i always wait for your videos to be uploaded everyday and thank you for all of that work YOU TAUGHT US WELL THANKS A LOT (NO CAPACITOR NO SHORTED CAPACITOR ;)
So funny!bThank you!
Almost every logicboard repair video on the A2442 MacBook Pro refers to this circuit of the board and almost always several layers of the board are damaged / burned in this exact area. This has to be some mistake in the board design by Apple.
"mistake" :D
it's a feature, by Apple 😂
@@maklogetrich2378 costs only 599
No Capacitor Track = No shorted Capacitor Track !
May God bless you, our teacher. By God, I have a problem with the Toshiba Satellite Pro model R50-B-15J laptop. The problem is that it starts, writes Toshiba, and turns off. I emptied the charge, removed the battery, and put it back in. The same problem remains. I tried to charge the BIOS and restart it. It became a black screen. I restored the old BIOS. Same problem, replaced. I used the flash drive, 32q32, and I charged the old BIOS with it. The same problem remains. Can you help? Thank you.
Check the power button! Try disconnecting the keyboard too!
I can't believe comments calling Sorin dodgy made him actually replace capacitors (even if his heart isn't in it).
I'm almost laugh to see that replacement cap, tiny cap 😂
I ended up with an i5 iMac in a deal a few years back, bad hard drive and Apple wanted several hundred dollars to fix it, I had an SSD in it in less than an hour, and my business partner used it after that.
You are the real mad max 😈
that tiny cap next the biggest one lol
Nice job. As far as i know apple only change the complete part, so they charge for a complete new motherboard. It is not really a repair but mor of a change 😞
I think the capacitor was a polarized capacitor ' tantalum '
I saw thumbnail, and was hoping for flames. How disappointing 😅
Is it that slow,....3 macbooks in a row 😂
Hope you're OK Sorin as that's the second time in as many days that I've seen you replace a capacitor?! ;)
Hi Sorin, do you have hp elitedesk 800 g3 desktop mini 35w clean bios bin that has Active Persistence Status disabled? I need one to reflash my bios.
Propper calibrated BBQ! lol
Nice one
CALL THE AMBULANCE, he's having a stroke! Replacing a capacitor???
Coil I can see it when u put fuel
Where is the behind the scenes part with the motherboard disassembly/reassembly? 😂
nothing to edit there, only beep beep beep :)))))))
Hello🤝👍👍👍👍👍👏👏👏👏👋👋👋👋nice barbeque 😅
@12:12 Its a cappacitoooooor
lol at the capacitor 😂😂😂
very known problem, 6 different screw types, different length, all one under another, just a nightmare to remove the MB from a new MacBook's.
Sorin why not buy a dremel tool? makes this job alot easier and safer for the board
Better than factory.
northridgefix hhhhh
I love some surgery on motherboards. "naaah, we don't need this track!"
Sorin always making proper calibrated motherboards.
watching this just to hear him say "we have picture"
Hey a MacBook repair, at first I thought I was watching Louis Rossman lol 🤣👍👌
PPB BUS3 super hot!
So replace a capacitor is really a bad idea ?
Spoiler alert.
Cap replacement: "Size matters" (That's what *she* said). Your replacement cap looks definitively way too small. The size is always in relation to the Farads and to the voltage. You could have measured one of the others beside the exploded first to find out the Farads.
Apple was agoing to ask the customer 600 Pounds for a motherboard replacement.
" perfect " and " mda..." True Romanian :))
Sorin, Apple store doesn't repair their logic boards. Price would be to replace entire logic board.
How to download MacBook ceramic board❤
Nice repair...as usuall.
Half hour to take out Mac board?
HA ha ha you made this thingy work 😅
How much for a repair like this on a MacBook?
flat rate ma man, everything for $40
I don't believe for Mac it's the same price as for cheap notebooks, otherwise he wouldn't charge different prices for gaming laptops.
@@Tribes11 well, not that hard fix, simply u do not encounter those american computers as much as others, but its the same stuff ma man
@@markodzo hmmm I see, but what about the fact that apple users usually are willing to pay more since they think apple products are superior?
@@Tribes11 Depends'', software/hardware?,,,, The perception of whether Apple products are superior to other tech products is subjective and varies from person to person. Apple products are known for their sleek design, user-friendly interface, and seamless integration across devices. However, the perception of superiority can also be influenced by marketing, brand loyalty, and personal preferences. It's important to consider individual needs and preferences when evaluating the superiority of tech products.
Hi Sorin, dont you always say if we don't have a capacitor we don't have a shorted capacitor? Why did you try to solder a new capacitor here? 😂😂
are you kidding me? for such a new mashing, what o you say of me watching this video with my mid 2012 MacBook Pro. I'm really looking to get the M3 MacBook air but I really don't want to encounter issues like that!
I think if the old one was a tantalum, you better replace trough a tantalum too and not ceramic.
the problem is a shorted track, not the caps itself
but yeah, replace the same one is better
There is a reason why.
Proper calibrated 🤣 lol
Please Sorin next Time take the board out before using the hot air . 😢😢😢
I think the repair from Macintosh before yourself was going to replace the whole mother board that's why it was so expensive.
Proper dodgy capasitor replacement job
no track no short
3:20 "Let's see, ppvbat, pee pee we butt ..."
No more No capacitor No problem , It's now no track no problem.
CAPACITOR MEANS EASY MONEY
At this moment Apple is reading comments !!
There is so many chip left there on the motherboard... you don't need to solder this chip back 😂
kapasitör hasetinden çatlamış.
apple gallbladder removal surgery
NF dot drill! heh heh.
Take some lessons from louis rossman
better than factory! hahaha!
No capacitor No shorted capacitor 😆
OMG he replaced another capacitor. I tell you, the end is near!
💪💪💪