Boss RC-1 Loop Station demo - Vocal and improvised percussion
HTML-код
- Опубликовано: 9 сен 2024
- This is my demo of the Boss RC-1 Loop Station pedal. I've used my dodgy voice and some improvised percussion just to make this video a bit different from the many guitar-based reviews. This pedal can loop anything!
Thanks again for the video...........and the quick reply!!!
David
Another top review Mr G
Great job !I just got mine and will begin to explore .
Good review . I have the RC-3
Hi! Did you use a mixer? Or you connect the microphone direct to the pedal? Thank you for this video!
Direct to the pedal
Hey, just came across this video, I haven't used looping but I've been trying with my phone app and I'm thinking of getting the rc 1
Can I connect my guitar and a mic for vocals as well , I can see u only had the mic connected so will rc 1 be able to get both guitar & mic or is the rc 30 better since it has a mic channel
You'll need a joiner cable or a little mixer to get both sources in at once.
@@gearfacts thanks, that helps a lot🙌🏼
thank you!! i wanted a vocal review, very useful
Glad it was helpful! Sorry about my voice :/
Hi there,
Good demo, and to the point!
One question, it obviously has inputs for guitar, keyboards? But you used a microphone, was this a basic dynamic type or has it got to be powered?
Thanks, David
I used a normal dynamic mic, it doesn't need to be powered. As long as its cable ends in a mono TRS 6mm pin then it's all good :) GF
@@gearfacts Doesn't that affect the pedal intern system? I'm afraid to broke my RC1. Thanks.
@@osuperjames There's no way it can do any harm.
Merci beaucoup !!!
:) Gearfacts
how do you record in stereo? My loops sound flat compared to the playing.
Thanks for the demo! I've got my amp plugged in to the input and mic into the output but no sound is coming out....any thoughts???
Yep, that's the wrong way round. Reverse those plugs and it should be all good :)
I've got this same loop station, but fail to find a good microphone to go with it (that has both the jack plug ending and is amplified, since the non-amplified one I try needs me to scream to produce some sound..). Could you maybe help me out here?
I really wish I had the answer. An ordinary-sized mic with a neat little pre-amp in it would be such a useful thing. Some video mics have them and they aren't too expensive. Maybe that's worth a try?
Hello, excellent video, I have a question is the yamaha pedal a piano sustain pedal ????? It seemed to me that you have it connected in the stop / undo ... It is a pedal for piano ,, ???? I would appreciate your advice. Greetings from Nicaragua...
Hi Abel, yeah this video is from a long time ago but I think I was using the sustain pedal as a start/stop button. Seemed to work fine. Lots of pedals are just on/off switches :) Thanks for the message and happy new year!
Hey @@gearfacts thank you ... So this piano pedal works well, to stop the loop and turn on, well thanks for the information, I appreciate the time you took to write and respond ... once again greetings from Nicaragua and happy new year
Once you lay down the first beat and tap to start overdubbing will it only record each layer for the same amount of time as the initial beat? Thats why after the first overdub you don't need to push the button for each new layer you just record and listen? Is that right? HALP haha 😅😭
Yep same length for each repeat /GF
good review! would you help me with something? i wanna use a mic in my RC - 3 but a wanna do it right, what cabels should i use? do i need to use a direct box to put in line in the table?
Yes, either a direct box or an effects unit of some kind with a bit of amplifying ability would definitely help. Ordinary TRS cables should be fine :) #gearfacts
Thank you for the video. I'm having trouble figuring out what cables to buy to connect the microphone into the rc 1. Initially I purchased a XLR to unbalanced mono 1/4 but got lots of noise. What is your cable setup here, it sounds very clean and clear? Thank you for any help!
My setup was the same as what you describe but the noise levels seemed reasonable. Is your mic ok? Maybe try a different cable too, old cables can get a bit mushy :) Gearfacts
@@gearfacts will a powered mic create less noise?
Have the same with the Yamaha momentary switch . Still a bitch with a glitch !
:) #gearfacts
Why so much hiss?
Coz I did a bad recording... Guitar gear always makes heaps of noise in my house, the wiring is terrible.
Like most who demo on Y/Tube, you speak too fast, too much info - too fast.
Slow down down, man. Just because you know how to use this gadget doesn't mean others do.
Sorry dude. This is an older video, hadn’t really found my style yet.
@@gearfacts You are a gentleman, sir. Thank you for your reply and producing this video for others.
I have just ordered a RC-1. Perhaps you can help. I hope to be able to skip the overdub sequence by simply pressing once during the overdub mode (without doing any overdubbing) and going straight into playback. Is this possible? I want this thing to be as simple as possible.