Thanks. I watched the video and gave it a shot doing both updates with a USB Drive and it worked great. The system took a good 20-30 sec to reboot following each update, but it ended up just fine.
Got the message PND didn't update with the NAV portion. Forums out there seem to talk about maps out of date or something. We'll just skip that part and everything updated fine. Differences...no "accept" button when you turn it on. Also wherever you are at when you turn the radio off that's where it starts when you turn it on. I use my Nav as a speedometer since the gauges are impossible for me to see in daylight (2012 Rubicon). Everything else updated. Looks like a dark mode all the time instead of that ugly blue. I like it.
thanks to you i have jeep grand 2011 uconnect RBZ software ver 8 i was try to install ver 10 its good to work but startup by DOOGE screen pls how can i change to JEEP SCREEN or back to old ver.
Good day !! First Thank you !!! You inspired me to Update my RHB radio in my 2011 Durango. I 'd like to see the firmware and other numbers under the "About" tab in NAV system and under hard key "Menu" I don't seems to be able to update the maps . Thanks !!!
Hi seems 2011 to 13 hard to find nav updates going to try on my jeep grand cherokee today , go to navigation then check and it will show what software you have mine was melco rev 230 crossing my fingers , so your radio update worked ?
I did the updates and thought I'd ruined it for sure, but everything seems fine. I got a message that the PND didn't update, but the process chugged right along.The Maps do seem a little smaller.
Well, it's been a week now and the new interface is beginning to grow on me quite a bit. So overall, it was worth the effort. I wouldn't have updated if not for your video. Great end to end instructions. Thanks for posting.
this video saved my butt. I had a 430 RBZ radio in a jeep compass. I resubscribed to siriusxm and all my channels were scrambled, the categories showed empty, the presets all showed empty except for channel number. it played fine when i bought the car in may 2019, then i remembered the only thing i did was upgrade firmware on uconnect. sirius employees are for the most part dicks and if refresh doesn't solve it.......duh. So I dl'ed the 33 iso firmware update and once it rebooted and came back up all my sat channels back to normal. TY SO much for this video, it saved my bacon and sirius gets to keep another customer. wish the employees spoke better english.....
Thanks, fiero, always enjoy your videos! My biggest concern is whether these updates will affect the backup camera. Hopefully your camera still works, and these updates did not revert the flash the dealer did?
It worked for me. I have a green jeep and the blue screen was a boomer. Now that the background is green after the update all goes along. Jeep logo show every time. Too soon to know if I will find any problems after the update.
Thanks for your video i was able to update my software but this did not fix my problem, hope you can help me with it. When i insert an audio cd or data cd with mp3 tracks it only reads one track and does not have the capability to be copied to the hard drive. Also i tried using a flash memory same thing it only reads the name of the track but does not read it nor copy it. Thanks
Vasiliy Pervuhin how did you get it to work with usb? Did you plug it in the center console? Did it start itself or did you have to command it via Uconnect? I can’t get it to read mine.
I have a problem with my rbz unit, I did the update process from 01.33.19 to 01.33.23, when it completed and rebooted, it didn't turn on anymore, now it's at the uconnect logo screen and it reboots constantly, is there something wrong? Can I do it or did my rbz already die?
have the uconnect 430/430N in the display settings page the screen is off can’t seem to get the touchscreen to work how do you turn the screen on or is the unit garbage
2011 dodge grand caravan crew 430 RBZ , radio off system crashed , just screen shows dodge logo, I tried many things, but not successful , radio still off. I need help...
The site doesn't seem to have the download links for it anymore. I just wants me to buy a preloaded SSD or HDD now.... Any idea where to find these now?
The sound is differently different. Almost like a hall or full effect. Its hards to explain. But I know when getting in my wife accord, her stereo just sounds more narrow.
Didn't work for me any ideas??? Did I have to install the first update applied 2nd update and still has old look.... Any help would be awesome! Great videos!
Does the uconnect 430 RBZ need an amplifier if upgrading from a uconnect 130? Local stereo installer said u430 does not come with the power of the u130, true??
hi my device shows a picture or a dodge sign, and no instructions are working Previously it was working and suddenly it stopped my device mygig 730n RER
Hey so I just installed a RBZ in my 2012 grand Cherokee that doesn't have navigation, does this firmware update still work? Change the aesthetics of it like shown?
I have a 2017 Dodge Caravan with a 430 trying to get apple car play is it possible? Can pair my iphone to make phone calls but not car play. There are no updates for the 430 raadio
Hey so I just updated everything, but the interface fails to have the jeep logo and everything now, any reason why? Like the green streaks on the screen & the jeep logo do not show up anywhere.
Was that the RBZ radio that I saw you running navigation on? I just bought a Avenger with that same head unit and I am trying to figure out if nav is supported by the RBZ. I have upgraded the firmware already. Thanks for any help!
So I updated it, everything is working except the Jeep logo isn't showing up on the main screen, also none of the Sirius stations show any graphics either, as well as using pictures as a background, it isn't working either., should I try to reinstall the update, or maybe downgrade to the 33 version??
I have a HDD problem where I can't access to the HDD in my Jeep. It always says HDD not available. I downloaded the update for my REN Sirius Non-Nav and It didn't show me the update screen. Any help or recommendations?
Hey maps don't get updated. Just the look. I hear if you want to update the maps for the $150 you have to downgrade to 33 it won't work with 50 update. I went up to 33 still waiting for 50 or to update maps first.
hi Fiero do you know if an US chrysler town&country 2014 need can be updated to have a EU map currently ones states and canada. unit is an rhb15 from sirius
I have the 430 rbv in a Cherokee it does not have nav everything works but it has application 20.02.01 can I still do these updates ? And will I lose anything like the back up cam or Uconnect? Because they work NOW. But on my SiriusXM I do NOT have all the channels I only have 100 or some channels when my subscription says I have way more . On my old radio I had all the channels. I was kinda hoping if I did this updates maybe I might get my channels back
Ok cool if you find out anything about the rbz let us all know that's what's in my jeep . And it still has application 20.02.01 on it . Just made since to me to go to 30 then 50 but I don't want to brick it for sure so I'll leave it until someone has figured this out
It does work on the RBZ .. You'll need to update to 33.0 before you do the 50.00. It's really simple to do. I did mine on a flash drive and plugged into the usb on the radio. There's a small delay, and it might say no data on the usb drive at first, but it'll start the download.
+fiero880 I just purchased a 2009 Chrysler Aspen with the 430RBZ unconnect. I'm usually very good with our electronics, connecting bluetooth devices, etc. In fact, while waiting to buy the Aspen, I've been driving a rental, Chrysler 200, and had my Samsung Note 4 connected via bluetooth, for listening music from my phone, handsfree calls, etc. But for some reason, I'm having trouble connecting my cell phone to the Aspen. Any tips or advice? Thanks :)
The RBZ is suppose to be the RHB but without the navigation. However on the RHB and RBZ they did require a separate bluetooth / connectivity module in order to activate U Connect. Does the U Connect actually work when you press the phone button ?
+fiero880 ok, yes I actually got the Bluetooth uconnect working. Now, I'm just having issues playing media from my cell &/or downloading music from a flash drive. I was able to transfer like 15 songs to the HDD this morning. But hours later, when I tried to download more music, it froze at 99% complete and after it finally unfroze, I checked and NONE of the music from either times was on the HDD song list.
this is no longer possible. The website states RHB systems have a lock on the firmware, and there are no disk images available for download. Might want to update your video
+themoj0 actually...i found a page that looks like the page you were at. but i got there tr\hrough an outside link, not the mygig-disk main page. interesting
Thanks. I watched the video and gave it a shot doing both updates with a USB Drive and it worked great. The system took a good 20-30 sec to reboot following each update, but it ended up just fine.
which USB port did you connect to to do the update?
Got the message PND didn't update with the NAV portion. Forums out there seem to talk about maps out of date or something. We'll just skip that part and everything updated fine. Differences...no "accept" button when you turn it on. Also wherever you are at when you turn the radio off that's where it starts when you turn it on. I use my Nav as a speedometer since the gauges are impossible for me to see in daylight (2012 Rubicon). Everything else updated. Looks like a dark mode all the time instead of that ugly blue. I like it.
That is some funky ass music at the beginning brother!
thanks to you i have jeep grand 2011 uconnect RBZ software ver 8 i was try to install ver 10 its good to work but startup by DOOGE screen pls how can i change to JEEP SCREEN or back to old ver.
Hi Eddie . Just want to say thank you for show us this video. Thank you thank you
You are welcome.
The jeep logo doesn't show on back ground anymore after update,but everything else works good on my RBZ unit,thanks for the video
Nice to see a video about your Wrangler...
Yes its been long over due.
Good day !! First Thank you !!! You inspired me to Update my RHB radio in my 2011 Durango. I 'd like to see the firmware and other numbers under the "About" tab in NAV system and under hard key "Menu" I don't seems to be able to update the maps . Thanks !!!
Hi seems 2011 to 13 hard to find nav updates going to try on my jeep grand cherokee today , go to navigation then check and it will show what software you have mine was melco rev 230 crossing my fingers , so your radio update worked ?
I did the updates and thought I'd ruined it for sure, but everything seems fine. I got a message that the PND didn't update, but the process chugged right along.The Maps do seem a little smaller.
I am still not sure if I like the new interface either.
Well, it's been a week now and the new interface is beginning to grow on me quite a bit. So overall, it was worth the effort.
I wouldn't have updated if not for your video.
Great end to end instructions. Thanks for posting.
Anytime!!
this video saved my butt. I had a 430 RBZ radio in a jeep compass. I resubscribed to siriusxm and all my channels were scrambled, the categories showed empty, the presets all showed empty except for channel number. it played fine when i bought the car in may 2019, then i remembered the only thing i did was upgrade firmware on uconnect. sirius employees are for the most part dicks and if refresh doesn't solve it.......duh. So I dl'ed the 33 iso firmware update and once it rebooted and came back up all my sat channels back to normal. TY SO much for this video, it saved my bacon and sirius gets to keep another customer. wish the employees spoke better english.....
Thanks, fiero, always enjoy your videos! My biggest concern is whether these updates will affect the backup camera. Hopefully your camera still works, and these updates did not revert the flash the dealer did?
David the camera works perfect no issues. In fact it has an extra setting I have yet to figure out for the camera.
It worked for me. I have a green jeep and the blue screen was a boomer. Now that the background is green after the update all goes along. Jeep logo show every time. Too soon to know if I will find any problems after the update.
Would this update fix my nav from not working. Everything else works on the head unit. It’s a 430 rhb.
Thanks for your video i was able to update my software but this did not fix my problem, hope you can help me with it. When i insert an audio cd or data cd with mp3 tracks it only reads one track and does not have the capability to be copied to the hard drive. Also i tried using a flash memory same thing it only reads the name of the track but does not read it nor copy it. Thanks
Thank you! It really works from USB.
Vasiliy Pervuhin how did you get it to work with usb?
Did you plug it in the center console?
Did it start itself or did you have to command it via Uconnect?
I can’t get it to read mine.
@@RVingTheCountry I'd like to know which USB port , as well.
I can’t get mine to work with a USB either
I've given up and have upgraded to a Kenwood system.
The usb port in the glove compartment or your centre console. Not the dash usb port.
Hi, do you have any video about install Uconnect on my radio 430 for Jeep Compass 2014?
I have a problem with my rbz unit, I did the update process from 01.33.19 to 01.33.23, when it completed and rebooted, it didn't turn on anymore, now it's at the uconnect logo screen and it reboots constantly, is there something wrong? Can I do it or did my rbz already die?
have the uconnect 430/430N in the display settings page the screen is off can’t seem to get the touchscreen to work how do you turn the screen on or is the unit garbage
Hi i got same unit like yours when you update did you have map on it or it comes after install upgrade
2011 dodge grand caravan crew 430 RBZ , radio off system crashed , just screen shows dodge logo, I tried many things, but not successful , radio still off. I need help...
The site doesn't seem to have the download links for it anymore. I just wants me to buy a preloaded SSD or HDD now.... Any idea where to find these now?
You might hate this question fiero880 but is there any update for Garmin on the uconnect 430 for RHB15 to work with european maps?
Other than changed colors, are they any other noticeable updates? better sound, different options, smaller text, different menus?
Thanks!
The sound is differently different. Almost like a hall or full effect. Its hards to explain. But I know when getting in my wife accord, her stereo just sounds more narrow.
Didn't work for me any ideas??? Did I have to install the first update applied 2nd update and still has old look.... Any help would be awesome!
Great videos!
It worked with no issues for me. And I had never updated mine.
Does the uconnect 430 RBZ need an amplifier if upgrading from a uconnect 130? Local stereo installer said u430 does not come with the power of the u130, true??
Never heard that before. I never had an issue with my installs.
hi
my device shows a picture or a dodge sign, and no instructions are working
Previously it was working and suddenly it stopped
my device mygig 730n RER
Wouldve been nice if you showed more of the screens and timeline of the 50 update....you just put the disk in and out..
Hey so I just installed a RBZ in my 2012 grand Cherokee that doesn't have navigation, does this firmware update still work? Change the aesthetics of it like shown?
I never found the answer to the RBZ question and the update. I would think its the same but I am not sure.
I have a 2017 Dodge Caravan with a 430 trying to get apple car play is it possible? Can pair my iphone to make phone calls but not car play. There are no updates for the 430 raadio
Hey so I just updated everything, but the interface fails to have the jeep logo and everything now, any reason why? Like the green streaks on the screen & the jeep logo do not show up anywhere.
No idea. There is quirks with these my gig units from time to time.
Revert back to version .33 that's what I did
Was that the RBZ radio that I saw you running navigation on? I just bought a Avenger with that same head unit and I am trying to figure out if nav is supported by the RBZ. I have upgraded the firmware already. Thanks for any help!
Joe, that is the RHB that I have. The RBZ has always been non nav.
Ok, thanks for the response.
nice job their fiero880
Thank you
will this work with a flash drive or does it have to be dvd format?
Paul Preciado it works with USB. I have the 730n RHR
So I updated it, everything is working except the Jeep logo isn't showing up on the main screen, also none of the Sirius stations show any graphics either, as well as using pictures as a background, it isn't working either., should I try to reinstall the update, or maybe downgrade to the 33 version??
Did you ever find an answer to your problem?
My solution was to revert back to version .33
thought there was a setting to enter vehicle type
I have a HDD problem where I can't access to the HDD in my Jeep. It always says HDD not available. I downloaded the update for my REN Sirius Non-Nav and It didn't show me the update screen. Any help or recommendations?
the hard disk drives do fail in the my gig systems. sounds like your did
Is it at all possible to upgrade the 430/RBZ to 430N/RHB with only a software update or would it require a whole new system?
Unfort no. The RBZ does not have the inputs or the electronics for the nav portion like the RHB
Hey maps don't get updated. Just the look. I hear if you want to update the maps for the $150 you have to downgrade to 33 it won't work with 50 update. I went up to 33 still waiting for 50 or to update maps first.
Jeff, Yes I see that now. what a bummer.
So can you not revert back to old system software I'm guessing? I lost my display settings in the .50 update
Update you can revert back to version .33 and upload maps
Did you get any delay with bluetooth after you updated?
hi Fiero do you know if an US chrysler town&country 2014 need can be updated to have a EU map currently ones states and canada. unit is an rhb15 from sirius
I do not know. Sorry
Hi, this will update only software or maps too?
Never mind. I saw Nav update. Cool.
Thanks. Great job!
Does this only work for Navigation models and how does this differ from the uconnect updates?
I do not know the answer to this question. I too only followed the website.
Did you find a way to add locations or waypoints for Offroad?
Friend, this updating is available for JK 12" sahara? or for all models? Tnks for you answer!
I have heard conflicting reports the update was removed then put back on. But I think the USB will work fine and yes 2012 is good.
Worked great bro!!!! tnks and regards from MTY, Mex.
were do i get that dvd
Is there any way to add navigation to the 430 RBZ?
No.
Very helpful, Thanks
Hey I need som help I have a 2011 Chrysler Town Country Touring T
And I don’t know really to update the new version I need some help Chieff pls?
I have the 430 rbv in a Cherokee it does not have nav everything works but it has application 20.02.01 can I still do these updates ? And will I lose anything like the back up cam or Uconnect? Because they work NOW. But on my SiriusXM I do NOT have all the channels I only have 100 or some channels when my subscription says I have way more . On my old radio I had all the channels. I was kinda hoping if I did this updates maybe I might get my channels back
I do not think the update works on the RBZ
Ok cool if you find out anything about the rbz let us all know that's what's in my jeep . And it still has application 20.02.01 on it . Just made since to me to go to 30 then 50 but I don't want to brick it for sure so I'll leave it until someone has figured this out
It does work on the RBZ .. You'll need to update to 33.0 before you do the 50.00. It's really simple to do. I did mine on a flash drive and plugged into the usb on the radio. There's a small delay, and it might say no data on the usb drive at first, but it'll start the download.
what year was your jeep ?
Did you have the burn on a dual layer or do you do it on a single?
How did you save the files on the disk, please help me please, please help me
I tried twice with suggested download discs and program and "Update failed"
thanks
help plz
after I have finished my update , the nav maps dosn't work :(
Can I downgrade again to or not?
what do you suggest?
Re do the update. That is my suggestion.
But can you downgrade from the 50 to the 33 version ?
You can downgrade by entering the hidden menu.
Yes , it works with me 👍🏼
Hey fiero880, what kind of video camera did you use for this video? It looks awesome.
ty worked perfect
Leon Jackson what website did you use?
I use the website in the description from the video
gracias
Was this a free update? Or do you have to purchase MyGig?
+fiero880 I just purchased a 2009 Chrysler Aspen with the 430RBZ unconnect. I'm usually very good with our electronics, connecting bluetooth devices, etc. In fact, while waiting to buy the Aspen, I've been driving a rental, Chrysler 200, and had my Samsung Note 4 connected via bluetooth, for listening music from my phone, handsfree calls, etc. But for some reason, I'm having trouble connecting my cell phone to the Aspen. Any tips or advice? Thanks :)
The RBZ is suppose to be the RHB but without the navigation. However on the RHB and RBZ they did require a separate bluetooth / connectivity module in order to activate U Connect. Does the U Connect actually work when you press the phone button ?
+fiero880 ok, yes I actually got the Bluetooth uconnect working. Now, I'm just having issues playing media from my cell &/or downloading music from a flash drive. I was able to transfer like 15 songs to the HDD this morning. But hours later, when I tried to download more music, it froze at 99% complete and after it finally unfroze, I checked and NONE of the music from either times was on the HDD song list.
Hey~~Can i update by my usb? or just disc?
From everything I read disc only.
Here in Brazil my application version 08.03.02 - Can I use it?
I do not know. Sorry
Version 08.03.02 cannot use these updates. Yours is the early version of RBZ and version 10.x.x.x. is the last update for your version.
haha, Max out Bass and Treble and notch out mids!
Song at 11:23 please. On the radio I can see it says Good something.
this is no longer possible. The website states RHB systems have a lock on the firmware, and there are no disk images available for download. Might want to update your video
+themoj0 actually...i found a page that looks like the page you were at. but i got there tr\hrough an outside link, not the mygig-disk main page. interesting
+themoj0 whats the site for the update?
+Vincent Russo mygig-disk.com/download-rhb.php
click on your model then downloads on the top, update your comment before people get discouraged
Can you update to a Bluetooth capable feature?
Hey, are you a member of any of the Jeep groups here in Houston?
I am not. I live in Upstate South Carolina.
Can you burn on a usb???
i tried burning on a usb stick with no success. cd worked perfect.
What is the latest software update available?
I just bought a 430N RHB and it says "Application 61.00.03! I thought 50 was the latest!
Not sure. At the time of this video, the one I did was the latest.
Was that klove on the radio
Yup!!!
Yikes. After the update the radio wants to know the security code... Don't know what the security code is...
+Russ Stodieck No worries. After being locked out and waiting 30 minutes I powered the radio back on an it came right back up.
glad you got it working. the 13's and up requiring the code when unplugged from power but didn't know when doing a firmware upgrade.
I did the update and I lost my Default view?
Did you ever find a solution to your problem?
Revert back to version .33 that's my solution to the same problem
Are you buying the carvel
The seller never contacted me back as of yet.
Can you sell me this set of CDs you made?
YEAH THIS DAMAGED MY SYSTEM, NO SOUND ANY MORE ON MY RER 730N, CANNOTRUPDATE AGAIN CAUSE MY MY DISK DRIVE DOES NOT WORK.