This design is incredible. I'm not rich enough to dive into the V1, but very excited to see where this goes with updates. Good on y'all for keeping it 2WD.
It's not a shelf queen, it's a garage shelf BBQ queen. When the boys come over for a bbq, you show this off and then crash into the curb out of the front of your home because you had too many beers 🤣🤣🤣
A lot of folks in this comment section sound a bit naive. Car is huge, fast and clearly handles well. Yall ain’t see the drifting?? And it’s only on 8s it’s got way more juice if need be
Soon, guys, soon. I decided to buy Joe Collins original ExoBouncer instead and still wound up spending another $1600 with you guys to finish it. Next month.
The plastic parts on this car are there for a reason. We would much rather break a small cheap part vs an expensive aluminum arm or carbon chassis. Replacement ball ends are $22 for a pack of 10 🥰 They can be upgraded to aluminum, but then there is a risk of damaging something more expensive.
@@SpAcE-gAdGeT they are a little iffy but look just don’t crash ur car keep it on the road,,, look I’m telling everyone this car is going to be like the raminator what version are we up to,, 4? There going to listen to feedback and come up with a better way for the front end, trust me
Almost bought one last week, but the only color the store had in stock was black. I’m still tempted, what I really want is a hellcat Durango rc but this will do for now.
The store in Rockland County anyway, and they have short hours they’re only open till 4 o’clock every day Monday through Friday but at least it’s close enough to me only a half hour drive usually everything cool is super far lol
@@PC_TV_73 We are located in Nyack New York and are open monday-friday 10am-4pm and most certainly have all colors available now in stock. find out address on primalrc.com or email sales@primalrc.com for further assistance. :)
We design everything in house and have manufactures we work with overseas. Every vehicle is also inspected before shipping to the customers. We also offer the pro build service for monster trucks where a technician will professionally assemble and break in the engine for you.
Curious as to why you would do a challenger when they are now discontinued. Obviously this was in the works before the car was discontinued, I get that. But I really don't understand why you would build a challenger when there are so many other more popular vehicles out there that are still in production.
I agree this will make a GREAT SHELF KUEEN. Yea a $2300.00, Shelf Kueen. You did 2 runs and the motor is already hot? Your fist mistake was using hobbywing jonk. Put a castle in this car, with the proper motor. But I don't see a 3 digit speed in this $2300.00 item.
Honestly glad I canceled both my pre orders and went with a yankee and an MCD can’t beat that level of performance and reliability. The body is neat and I will be ordering one soon to make a replica monster challenger on my MCD. May require a custom chassis but 🤷🏾♂️🤷🏾♂️
no such geariing combination the fastest combination is 50/24 for this car, recheck your speed with correct combination, other combinations are 50/24,51/23, 52/22, 53/21, 54/20, 55/19, Primal rc dragster gear sets are the same for primal rc challenger
This is correct the gas Challenger because they share the transmission with the Dragsters, although the Challenger has a differential instead of the Dragster's spool. But the Electric Challenger (in this video) uses any mod 1.5 pinions for electric motors and has a sliding motor mount. This allows for a wide range of gearing options.
Dull?? This car can be set up for drag racing, on road racing, drifting, speed runs, burnouts, this car does a little of everything and looks more detailed then most 1/5 scales and comes gas or electric. What more do you want? 😂
This design is incredible. I'm not rich enough to dive into the V1, but very excited to see where this goes with updates.
Good on y'all for keeping it 2WD.
Best 2wd onroad basher in the market!! Can't go wrong with the Primal Challenger. Love mine!
I'm definitely buying and keeping extra tires on hand!
Good looking car.
Thanks for sharing guys.
Very awesome!!! Can’t wait to get mine on the road!!
awsome rig and nice run great video👌✌👍
subded👍💪
what a insane car
Hey Primal RC! Epic burnout there at the end!
Curb stop burnout....yaaay!!....ha. that line lock is working mint.
Line lock works but car can still slide forward slowly unless you put a lot of weight in the front.
@@PrimalRC so it's useless!?.... Cool idea, bad execution.
@@modzilla74 Let's see your car that you created. Oh, you haven't made shit 👌
Definitely should’ve gone with QS8 connectors, those EC5s are no bueno. Nice passes 👍🏾💯!
It's not a shelf queen, it's a garage shelf BBQ queen. When the boys come over for a bbq, you show this off and then crash into the curb out of the front of your home because you had too many beers 🤣🤣🤣
Don't drink and drive
Yeah that kinda sounds like me
good stuff guys 🍻
Thanks Gary, you need the green one 😀
@@PrimalRC I’m working on it. lol
We need a Supra😍😍😍
Super cool👍
A lot of folks in this comment section sound a bit naive. Car is huge, fast and clearly handles well. Yall ain’t see the drifting?? And it’s only on 8s it’s got way more juice if need be
Shouldn’t some of this testing be happening before selling to customers?
We are always testing 😁
I get that but based on watching other channels it seems like this was rushed to market
I waited from 4th July ordered min just got it last week so they did plenty of testing on it
Much better promo
now that was a controled speed run !
This car needs to be 4wd, it's too big and squirrelly for 2wd!
It's 2wd to give the driving experience of the real V8 powered Challenger
Soon, guys, soon. I decided to buy Joe Collins original ExoBouncer instead and still wound up spending another $1600 with you guys to finish it. Next month.
My 5T flux shredded the spur gear lol so far the metal one is working
what about them front lower control arms exocaged had issues n design jus dont look strong
I dont know man, they slapped that curb pretty good. I’ve seen arrmas not come back from that 🎉
The plastic parts on this car are there for a reason. We would much rather break a small cheap part vs an expensive aluminum arm or carbon chassis. Replacement ball ends are $22 for a pack of 10 🥰
They can be upgraded to aluminum, but then there is a risk of damaging something more expensive.
@@SpAcE-gAdGeT they are a little iffy but look just don’t crash ur car keep it on the road,,, look I’m telling everyone this car is going to be like the raminator what version are we up to,, 4? There going to listen to feedback and come up with a better way for the front end, trust me
Is that the motor/esc combo that comes with the car? If not what setup is that?
That is what comes with the electric RTR car, we just put faster gearing in it for this video
Almost bought one last week, but the only color the store had in stock was black. I’m still tempted, what I really want is a hellcat Durango rc but this will do for now.
Hi, PrimalRc has all colors in stock right now.
@@PrimalRC in the store or online because in the store, they only had black last week. I wanted to pick it up in person and not ship it.
The store in Rockland County anyway, and they have short hours they’re only open till 4 o’clock every day Monday through Friday but at least it’s close enough to me only a half hour drive usually everything cool is super far lol
@@PC_TV_73 We are located in Nyack New York and are open monday-friday 10am-4pm and most certainly have all colors available now in stock. find out address on primalrc.com or email sales@primalrc.com for further assistance. :)
There in mexico ??
The Challenger is available here on our official website: primalrc.com/product/PRCHA
Do you do the same corrections for gas?
Lots of UH and UM’s chief….😊
Take that damn banana off the splitter
Its removable and a black bumper guard is included in the box too!
Any plans for Sinamon Stick as a color option?
At this time we only have the colors listed, we do have clear bodies that you can paint yourself any color.
Oh wow so nice 👍 how much cost that
primalrc.com/product/PRCHA
The only thing I want to know is primal rc build the parts and assembling the car by hand or where is all this coming from?
We design everything in house and have manufactures we work with overseas. Every vehicle is also inspected before shipping to the customers. We also offer the pro build service for monster trucks where a technician will professionally assemble and break in the engine for you.
Waiting on the Taylor motor gas upgrade..
We already sell them with that option.
Should get the gasoline ⛽️ version. That's the new challenge EV.
Would any other 1/5 rc body fit on the chassis?
Yes, almost any 1/5th body can fit with some custom mods. The wheelbase is adjustable to fit a wide range of other bodys!
I know those tires will need replacing after a couple of runs!!! And it should be 4WD.
Curious as to why you would do a challenger when they are now discontinued. Obviously this was in the works before the car was discontinued, I get that. But I really don't understand why you would build a challenger when there are so many other more popular vehicles out there that are still in production.
The Challenger is timeless and iconic! We built this to give enthusiasts an epic 1/5th scale!
Add a Cison V8 OHV to it.
I agree this will make a GREAT SHELF KUEEN. Yea a $2300.00, Shelf Kueen. You did 2 runs and the motor is already hot? Your fist mistake was using hobbywing jonk. Put a castle in this car, with the proper motor. But I don't see a 3 digit speed in this $2300.00 item.
It's only hot because we did that long tire melting, destroying burnout
Watch at 2:22 it doesn’t steer it pushes
A 2WD car needs some understeer for easier handling, without that it takes even more skill to drive ❤
It needs camber adjustable
It has adjustable camber
Not a very tight turning radius huh?
It's turns very tight but we had the DR turned down for the speed run
I run 34 36 on my felony 😅
Honestly glad I canceled both my pre orders and went with a yankee and an MCD can’t beat that level of performance and reliability. The body is neat and I will be ordering one soon to make a replica monster challenger on my MCD. May require a custom chassis but 🤷🏾♂️🤷🏾♂️
no such geariing combination the fastest combination is 50/24 for this car, recheck your speed with correct combination, other combinations are 50/24,51/23, 52/22, 53/21, 54/20, 55/19, Primal rc dragster gear sets are the same for primal rc challenger
This is correct the gas Challenger because they share the transmission with the Dragsters, although the Challenger has a differential instead of the Dragster's spool.
But the Electric Challenger (in this video) uses any mod 1.5 pinions for electric motors and has a sliding motor mount. This allows for a wide range of gearing options.
@@PrimalRC didnt know that, so does the poster have the maximum gear ratio for top end??
a car that size can easily do a 12s to 16s
I'm sure it could.
Only rear brakes kinda sucks tbh
It has front and rear brakes.
it is not even getting to half its speed. It could do...
That was full speed for 8S
My 1/5 kraton is faster n can go 61mph off-road as well
wow
That thing has no balls what’s going on with that thing it much be the motor u need more power 😂 there’s guys on 2 s doing 80 mph imagine 8s
I don't know about that, 330 scale MPH is fast enough for me for a Challenger.
Handling looks too RISKY, NOT WORTH RISK FOR 3G
Handling is just fine if you drive it scale, at Primal RC we try to make RC cars feel and drive like the real ones.
Que auto sem graça
Dull?? This car can be set up for drag racing, on road racing, drifting, speed runs, burnouts, this car does a little of everything and looks more detailed then most 1/5 scales and comes gas or electric. What more do you want? 😂
Então é versátil l ' más prefiro a configuração à gás...
@@ander.reformatudo My good sir, you can get it with the zenoah 32cc OR you can go with the beautiful taylorrc 35cc engine ;)