I don't know what liquid polymer is but here in the states many people use 100% Acetone just like what some fingernail polish removers are. You can also get it at most hardware stores, etc etc.
It's called wet sanding, and the first 6 minutes were fine. At that point, all you need to do is use a UV protectant spray or wipe to fill in the micro-cracks to make it smooth like glass. It also gives it long term protection from the sun and debris. Acetone/chloroform only works short term and leaves the plastic completely exposed. It will go bad even faster now that you sanded off the factory UV layer. They look about the same at the start, but would you rather it last about a year with acetone, or 3 to 5 years with proper protectant? Toothpaste, baking soda, and lemon was completely unnecessary. You already sanded off the bad layer. There is no need to waste time "cleaning" the fresh new layer. Just wash it off with water or glass cleaner to get rid of the debris from sanding, then apply the UV coating.
Peccato che siete lontano dal mio paese, altrimenti mi sarebbe piaciuto vederlo dal vivo quello che fate... non so come fate a rigenerare la plastica bruciata la sole
"Hats off to @InventorSC for this brilliant tutorial! It's amazing how a few minutes of focused effort can restore headlights to their former glory. The lesson learned here goes beyond car maintenance-it's a testament to the power of creativity and resourcefulness in solving everyday problems."
Thank you for the VIDEO, please can you tell me do you put something in the can of coca cola? How much chloroform do you put in the can, amount in parts of a liter. How do you use it? Thanks .
Vídeo complexo, pois os faróis já estavam limpos antes do procedimento, não indica granulometria das lixas usadas e deixa de dar nome e características de produtos usados. Realmente, aquém de métodos nacionais vistos na internet!
Buenas tardes desde Venezuela me puedes indicar cuales son los nros de lijas que usaste y que liquido es el que colocaste en la lata para el vapor gracias espero tu respuesta.
Hello my friend! I used 5 types of sandpaper: 800-1000-1200-1500-2000. The liquid used is Chloroform CHCL3. Thanks for watching and leaving your comments! Wish you all the best!
It says in afew minutes, really??. Video is over 12 minutes long. Its speeded up by about 3 or 4 times, so that makes it 36 or 48 minutes And thats just for one headlight. Looks like an all day long job.
@Inventor SC - I'm confused. Can you please explain why this is a "Genius Method"? After watching the video it seems time consuming and a bit expensive, considering all the materials required. The results look great though.
Non ho capito, sta volta 😢. Prima hai pulito con carta vetro? Poi hai usato dentifricio e alla fine cloroformio? TUTTE IN QUESTA ORDINE...oppure sono 3 metodi diversi?😢 Mi può spiegare?
I don't understand why a crystal clear headlight is first faded with a lot of effort and then made crystal clear again with even more effort in order to destroy the UV protective layer and the headlight becomes really dull after 3 months
Hello! Please watch our recent videos about headlights cleaning to see the differences clearly! Thanks for watching and sharing your feedbacks! Have a nice day!
Exactly. This acetone method leaves the plastic completely exposed and it will just go bad again faster. It's better to just sand (skip the toothpaste and baking soda nonsense), and then spray on a proper UV coating. There are also wipes or film you can use. Should last about 3 to 5 years, depending on which you use.
A i jeszcze jedno czy to jest reflektor zabezpieczony na kilka m-cy , czy trzeba dodatkowo lakierować , jestem zainteresowany ale chciałbym wiedzieć , na jakiej zasadzie to działa , wybacz brak wiedzy pozdrawiam
Hey amigo hazlo con unos realmente ópacoz haber si funciona tu metodo a estos solo les estas sacando brillo pues parecian nuevos antes de aplicar tu metodo
Was habt ihr alle nur gegenen eine gute Polierpaste wie 3M oder Rupes?? Das geht 1000 mal besser, mit einem 1000fach besseren Ergebnis - da gehe ich doch nicht mit Zahnpasta oder sonst was ran! Davon abgesehen, hättest Du eine Zahnpasta für Raucher und weiße Zähne genommen, die hätte Schleifmittel schon enthalten. Aber nochmal, dafür nehme ich eine Rupes Paste und bin ein 15 Min. fertig mit polieren
Hello! You can watch other videos about cleaning headlights in my channel to see the differences clearly! Thanks for watching and sharing your feedbacks! Have a nice day!
Hello! You can watch our recent videos about cleaning car lights to see the differences clearly! Thanks for watching and sharing your feedbacks! Have a nice day!
without a finishing wax of 2 to 3 apps, this is a naked plastic, not proper! i made mine, lasting 4 years at least now. you sealed the old wax but did not rewax, why?
Hello! You can watch other videos about cleaning headlights in my channel to see the differences clearly! Thanks for watching and sharing your feedbacks! Have a nice day!
Ninguém passa vídeo com o retirar verniz solto do farol, tentei fazer com a b esmaga dos de ter piorou por isso vídeos não relato, vale mais pagar a que entende ,como ggás se drive ou carglace
Il y a plus simple et sans risque de rayures 😅😅 AVEC DU DENTIFRICE ET UNE EPONGE POLICHE HUMIDE CAR AU PRIX OU SONT LES FEUILLES DE PAPIERS CARROSSERIE A L'EAU 😱😱..Et de plus c'est phares sont nikels 😅😅😅😅 quelles fumisterie 😅😅😅😅😅
1er par rapport aux miens ces phares ne sont pas abîmé 2eme faut masquer, faut poncer PFFFUUIII avec un chiffon et le dentifrice tu frottes, tu rinces avec un chiffon humide et basta ! ça marche... si t'es outillié comme lui utilise les vrais produits alors (compound)
Un bon conseil, faites faire ça par un spécialiste, ça vous évitera bien des déboires dont une dégradation irréversible de l'acétate ders phares De toutes les façons ce genre de procédé ne dure pas dans le temps! A bonne entendeur, salut!... moi j'ai donné!
Thank you for sharing your job! Great idea to heat using a coke can. It may also be usefull to apply liquid polymer vapor instead of cloroform
Hello! Glad to hear that! Thanks for watching and sharing your feedbacks! Wish you all the best!
I don't know what liquid polymer is but here in the states many people use 100% Acetone just like what some fingernail polish removers are. You can also get it at most hardware stores, etc etc.
Thanks for sharing, great idea
Thanks for watching and leaving your comments! Have a nice day!
very helpfull video, that shows everything step by step, explained easier than in any other videos
Hello! Glad to hear that! Thanks for visiting the channel and sharing you feedbacks! Have a nice day!
Good job. Thanks for sharing.
Glad you liked it! Thanks for watching and leaving your comments! Have a nice day!
It's called wet sanding, and the first 6 minutes were fine. At that point, all you need to do is use a UV protectant spray or wipe to fill in the micro-cracks to make it smooth like glass. It also gives it long term protection from the sun and debris. Acetone/chloroform only works short term and leaves the plastic completely exposed. It will go bad even faster now that you sanded off the factory UV layer. They look about the same at the start, but would you rather it last about a year with acetone, or 3 to 5 years with proper protectant?
Toothpaste, baking soda, and lemon was completely unnecessary. You already sanded off the bad layer. There is no need to waste time "cleaning" the fresh new layer. Just wash it off with water or glass cleaner to get rid of the debris from sanding, then apply the UV coating.
Hello! Thanks for watching and sharing your great experience! Wish you all the best!
Hello my friend, I am Yüksel from Bursa, I am just watching your videos, you show simple things but I think it is very useful.
Hello! Nice to meet you! Glad to hear that! Thanks for visiting the channel and leaving your comments! Have a nice day!
Satifaction, so amazing. Good Job.
I love DIY with low budget.
Good Luck. Cant wait for new content.
Hello! Glad you liked it! You can find other videos with many different topics in our channel! Thanks for your support! Wish you all the best!
@@InventorSC sure i will. Be good bro. Hopefully you get great succesfull on the next future.
PARABÉNS AMIGO ...ALEM DE NOS PASSAR O SEGREDO ,,VOCÊ NOS MOSTROU O ZELO ,PERSISTÊNCIA, E ESPECIALMENTE O CAPRICHO .....JÁU SP BRAZIL 😊😅
Hello! Nice to meet you! Glad you liked it and found it useful! Thanks for watching and leaving your comments! Wish you all the best!
Peccato che siete lontano dal mio paese, altrimenti mi sarebbe piaciuto vederlo dal vivo quello che fate... non so come fate a rigenerare la plastica bruciata la sole
Wow! Thanks a lot for the information.
Hello! Nice to meet you! Glad you liked it! Thanks for visiting the channel and leaving your comments! Have a nice day!
something is cooking in the kitchen....nice
Thanks for watching! Have a nice day!
"Hats off to @InventorSC for this brilliant tutorial! It's amazing how a few minutes of focused effort can restore headlights to their former glory. The lesson learned here goes beyond car maintenance-it's a testament to the power of creativity and resourcefulness in solving everyday problems."
Hello! Thanks for watching and sharing your feedbacks! Wish you all the best!
Que trabalho caprichado 👍🏽👍🏽👍🏽
Hello! Glad you liked it! Thanks for visiting the channel and sharing your feedbacks! Have a nice day!
os faróis dele estão perfeitos assim é fácil,quero ver nos foscos.
Hello! You can watch our recent videos to see the differences clearly! Thanks for visiting the channel and leaving your comments! Have a nice day!
Ottimo video.. per riparare la platica dei fari ... ma vorrei sapere se c'è un rimedio per proteggere la plastica prima che diventi opaca.
Thanks for watching and sharing your feedbacks! Have a nice day!
0:30 Thirty seconds of that horrible "music" was enough for me!
Thanks for watching!
So mute the sound ;)
😂 the same ^^
Adding lemon juice or vinegar to baking soda does nothing. They each cancel ,neutralize, the other.
Thanks for watching and sharing your feedbacks! Have a nice day!
Anything that can be used instead of chloroform for the finish? Like Acetone?
Hello! You can use headlight wax instead of chloroform! Thanks for watching and leaving your comments! Have a nice day!
Skip all this, just use "goof off" with microfiber towel keep wiping till you happy and buff up with rubbing compound, job done
Thanks for watching! Have a nice day!
ok I just did mine in 3 minuities each with just polishing compound & a form disc & a clean soft dry cloth
Thanks for watching and sharing your feedbacks! Wishing you a great day!
Thank you for the VIDEO, please can you tell me do you put something in the can of coca cola? How much chloroform do you put in the can, amount in parts of a liter. How do you use it? Thanks .
Hello! You only need to use an amount of chloroform of about 100-200ml! Thanks for visiting the channel and leaving your comments! Have a nice day!
Vídeo complexo, pois os faróis já estavam limpos antes do procedimento, não indica granulometria das lixas usadas e deixa de dar nome e características de produtos usados. Realmente, aquém de métodos nacionais vistos na internet!
Hello! You can watch our recent videos to see the differences clearly! Thanks for watching and sharing your feedbacks! Have a good day!
Buenas tardes desde Venezuela me puedes indicar cuales son los nros de lijas que usaste y que liquido es el que colocaste en la lata para el vapor gracias espero tu respuesta.
Hello my friend! I used 5 types of sandpaper: 800-1000-1200-1500-2000. The liquid used is Chloroform CHCL3. Thanks for watching and leaving your comments! Wish you all the best!
Felicitaciones por tremendo video
Sin barniz no hay restauración buena del faro
Pero esos Faros no necesitan nada, están en buenas condiciones, ni amarillentos están.
Thanks for watching and leaving your comments! Have a nice day!
No es cierto. Ya se estaba oxidando en la parte de arriba. Tengo un lado que se ve así mismo y el otro lado se ve nuevo y eso hace que se vea peor.
Hola.......cuanto tiempo dura esta tecnica.???
Hello! It will take 30 minutes if you polish carefully! Thanks for watching and leaving your comments! Have a nice day!
@@InventorSC creo que no me entendio.!!!!..............cuanto tiempo duran los focos antes de volver a estar amarillentos..??
It says in afew minutes, really??. Video is over 12 minutes long. Its speeded up by about 3 or 4 times, so that makes it 36 or 48 minutes And thats just for one headlight. Looks like an all day long job.
Thanks for watching and sharing your feedbacks! Have a nice day!
Ya me dió flojera mirar en video según los comentarios dura un chingo de minutos ,,,,, GRACIAS PASO 🤷@@InventorSC
@Inventor SC - I'm confused. Can you please explain why this is a "Genius Method"? After watching the video it seems time consuming and a bit expensive, considering all the materials required. The results look great though.
Hello! Thanks for visiting the channel and sharing your feedbacks! Have a nice day!
Does heating acetone gas will also work?
Thanks for watching! Wishing you a great day!
dmuchanie chloroformem świetny pomysł .
Yeah that’s definitely amazing! Thanks for watching and leaving your comments! Have a nice day!
Non ho capito, sta volta 😢. Prima hai pulito con carta vetro? Poi hai usato dentifricio e alla fine cloroformio?
TUTTE IN QUESTA ORDINE...oppure sono 3 metodi diversi?😢
Mi può spiegare?
Autor chyba nie zrozumiał przekazu... ;) albo ja :)
Çizer dakin
I don't understand why a crystal clear headlight is first faded with a lot of effort and then made crystal clear again with even more effort in order to destroy the UV protective layer and the headlight becomes really dull after 3 months
Hello! Please watch our recent videos about headlights cleaning to see the differences clearly! Thanks for watching and sharing your feedbacks! Have a nice day!
Exactly. This acetone method leaves the plastic completely exposed and it will just go bad again faster. It's better to just sand (skip the toothpaste and baking soda nonsense), and then spray on a proper UV coating. There are also wipes or film you can use. Should last about 3 to 5 years, depending on which you use.
😲😳👏👏👏
Thanks for visiting the channel and leaving your comments! Have a nice day!
@@InventorSC 😃👍💪🤝
Doesn't make sense as the headlight used for this demonstration was looking crystal clear...faded headlight should be used instead.
Hello! You can watch our recent videos to see the differences clearly! Thanks for watching and sharing your feedbacks! Have a nice day!
Preklad
L😊@InventorSC
Same result if you get car polish, don't need any lemon, soda and tooth paste
Thanks for watching and sharing your great experience! Have a nice day!
Jel moze aceton umjesto kloroforma?
Hello! I think it's possible. But it will be most effective if you use chloroform! Thanks for watching and leaving your comments! Have a nice day!
@@InventorSC a ten chloroform do pustej puszki czy z colą on paruje na reflektor ,marny chemik można dwa słowa opis,,,
A i jeszcze jedno czy to jest reflektor zabezpieczony na kilka m-cy , czy trzeba dodatkowo lakierować , jestem zainteresowany ale chciałbym wiedzieć , na jakiej zasadzie to działa , wybacz brak wiedzy pozdrawiam
What to put in a jar?
Thanks for watching! Have a nice day!
@@InventorSC Thanks, so what did you put in the jar?
You should have done an image before and after
I’ll notice that! Thanks for watching and sharing your feedbacks! Wishing you a great day!
You can stop here and there and see yourself. Before was better.
What number of sand paper did u use ?
Hello! I used 800-1000-1200-1500-2000 fine sandpaper! Thanks for watching and leaving your comments! Have a nice day!
Fading always happen from inside of the Lamp.
Thanks for watching! Wishing you a great day!
Hey amigo hazlo con unos realmente ópacoz haber si funciona tu metodo a estos solo les estas sacando brillo pues parecian nuevos antes de aplicar tu metodo
You can watch our recent videos to see the differences clearly! Thanks for watching and sharing your feedbacks! Have a nice day!
What does heated Chloroform give us? Only polishes? or maybe it also gives a hardened layer?
Thanks for watching! Have a nice day!
@@InventorSC Well, you answered my question.
A motorháztetőt máskor nyisd fel,ügyes.
Thanks for watching! Have a good day!
Kloroform buharı çok iyi
Thanks for watching and leaving your comments! Have a nice day!
Thank you for the VIDEO, please can you tell me how much coca cola and how much chloroform you put - amount in liters. Thank you.
ขอบคุณจริงๆครับ
Glad you liked it! Thanks for watching! Have a nice day!
Nie prościej byłoby podnieść maskę niż oklejać taśmą ???
Thanks for watching and leaving your comments! Have a nice day!
Was habt ihr alle nur gegenen eine gute Polierpaste wie 3M oder Rupes?? Das geht 1000 mal besser, mit einem 1000fach besseren Ergebnis - da gehe ich doch nicht mit Zahnpasta oder sonst was ran! Davon abgesehen, hättest Du eine Zahnpasta für Raucher und weiße Zähne genommen, die hätte Schleifmittel schon enthalten. Aber nochmal, dafür nehme ich eine Rupes Paste und bin ein 15 Min. fertig mit polieren
Hello! Thanks for watching and sharing your great experience! Wish you all the best!
chloroform is illegal to buy in the usa
Thanks for watching! Have a nice day!
in Europe too
Chloroform?
Yeah, that’s right! Thanks for watching and leaving your comments! Have a nice day!
Agreed - firstly, it's carcinogenic as far as I understand, secondly, it's impossible to buy here in the UK!
Why did you do this on a good headlight?
Hello! You can watch other videos about cleaning headlights in my channel to see the differences clearly! Thanks for watching and sharing your feedbacks! Have a nice day!
This head light was very clean to begin with. We do not know if your method was effective.
Hello! You can watch our recent videos about cleaning car lights to see the differences clearly! Thanks for watching and sharing your feedbacks! Have a nice day!
Ils sont déjà très propres
Hello! Please watch our recent videos to see the differences clearly! Thanks for watching and sharing your feedbacks! Have a nice day!
without a finishing wax of 2 to 3 apps, this is a naked plastic, not proper! i made mine, lasting 4 years at least now. you sealed the old wax but did not rewax, why?
Hello! Thanks for watching and sharing your great experience! Wish you all the best!
何十年か前の施工方法でも見せられた気分だ
Thanks for watching! Have a nice day!
Too slowly for interesting
Hello! Thanks for watching and sharing your feedbacks! Have a nice day!
How long it stay
Hello! It will last about 4-6 months depending on usage! Thanks for watching and sharing your feedbacks! Have a nice day!
Eso es de 1 a 2 horas de lija
Thanks for watching! Have a good day!
Bueno dos faros no necesitan nada por que están nuevos as lo en un faros sucios mde verás y te lo creo gracias
Thanks for watching! Have a nice day!
cmon ,u used to much sand paper for that light damaged lights ,one time 800 then use 3M stuff s ,in 20 minutes u can do both like new...
Thanks for watching and sharing your feedbacks! Wishing you a great day!
Watching that horrible masking job was painful. No need to watch the rest after that botch job....
Thanks for watching! Wishing you a great day!
He actually started on an already clear lens.makes no sense.
Hello! You can watch other videos about cleaning headlights in my channel to see the differences clearly! Thanks for watching and sharing your feedbacks! Have a nice day!
Just wasted 12 minutes of my life 😢
Thanks for watching! Wishing you a great day!
Using chloroform was not a waste of time.
😂😂😂😂
You are the dislike button we all need returned, thank you
buy a UV Clean coat instead of doin that
Hello! Thanks for sharing your great experience! Can you share how you do it? I would love to learn your method! Wish you all the best!
Il est déjà propre vous nettoyer quuoi???
Hello! You can watch our recent videos to see the differences clearly! Thanks for watching and sharing your feedbacks! Have a nice day!
few minutes? seems like hours of sanding
Hello! Thanks for watching and leaving your comments! Wish you all the best!
No explica que es lo usan estan locos
NO sanding it said...& wot do we c? B/S.
Thanks for watching! Wishing you a great day!
Ninguém passa vídeo com o retirar verniz solto do farol, tentei fazer com a b esmaga dos de ter piorou por isso vídeos não relato, vale mais pagar a que entende ,como ggás se drive ou carglace
Thanks for watching! Wishing you a great day!
Passa uma lixa a seco 600 e 800 para tirar o verniz, depois vc usa as dagua igual o cara aí.
Il y a plus simple et sans risque de rayures 😅😅 AVEC DU DENTIFRICE ET UNE EPONGE POLICHE HUMIDE CAR AU PRIX OU SONT LES FEUILLES DE PAPIERS CARROSSERIE A L'EAU 😱😱..Et de plus c'est phares sont nikels 😅😅😅😅 quelles fumisterie 😅😅😅😅😅
Thanks for watching! Have a good day!
Headlights were already clear 🤷♂️🤦♂️
Thanks for watching and sharing your feedbacks! Have a nice day!
This is crazy and takes too long. why don't use fine compound.
Thanks for watching! Have a nice day!
IT TAKES L9NGER TO CLEAN THAN TO REPLACE HEADLIGHTS
Hello! Thanks for watching and leaving your comments! Have a nice day!
But less expensive... I miss the old sealed beams, & when they made these out of actual glass. :(
Too complicated for ordinary man without tools.
Thanks for watching! Wishing you a great day!
Biz bu işi yapamayız çok uzun işlem 2 dk işlem değil
Thanks for watching! Have a nice day!
貴方の数分ってどのくらいなの？（爆笑）
Thanks for watching! Have a nice day!
Would you care to tell me where I can buy chloroform in the UK? Impossible!
Thanks for watching! Wishing you a great day!
YEMEZLER....
Thanks for watching! Have a nice day!
SO I JUST ADDED TO 800K VIEWS TO BASICALLY DO WHAT WD-40 DOES IN 6 SECONDS ❓🤦♀️
Thanks for watching! Have a nice day!
On se faisait moins chier avec des phares en verre
Thanks for watching and leaving your comments! Have a nice day!
*OMG* 🤣
Thanks for watching!
Great 👍 technique but you can’t just get 😂chloroform in my country.
Hello! You can use acetone instead. The results are the same! Thanks for watching and leaving your comments! Have a good day!
خب کاپوت رو ببر بالا اینهمه چسب هدر نده😂
Thanks for watching! Wishing you a great day!
1er par rapport aux miens ces phares ne sont pas abîmé
2eme faut masquer, faut poncer PFFFUUIII
avec un chiffon et le dentifrice tu frottes, tu rinces avec un chiffon humide et basta ! ça marche... si t'es outillié comme lui utilise les vrais produits alors (compound)
Thanks for watching and sharing your feedbacks! Have a good day!
@@InventorSC avez-vous déjà entendu parler qu'avec de la DW40 que ça marche ? on m'en a parlé je n'ai jamais essayé !?!
Man that seems a lot of work. You probably could get it done professionally around $40 bucks.
$40 ? ... in what country ?
Thanks for watching! Have a nice day!
too much time and effort. even though just by coating a liquid in no more than 5 minutes it will be back to new.
Thanks for watching and leaving your comments! Have a nice day!
Too much effort and time consuming. Why use 1000, 1200 and 2000 water paper?
Hello! Thanks for watching and sharing your feedbacks! Can your share how you do it? I would love to learn your methods! Wish you all the best!
Kofti
Thanks for watching!
Ada kah disini yg sudah membuktikan
Thanks for watching and leaving your comments! Have a good day!
bir kaç dakika ??
Thanks for watching! Wishing you a great day!
Die waren noch nicht blind verarsch uns nicht
Hello! You can watch our recent videos to see the differences clearly! Thanks for watching! Have a good day!
일반인이 어떻게 할수 있나요 ?
Thanks for watching! Wishing you a great day!
I know you use aceton
Yeah, you can also use acetone! Have a good day!
wenige Minuten? 😂 Welch ein Aufwand. Das geht viel einfacher und schneller s.u.
Thanks for watching! Wishing you a great day!
Un bon conseil, faites faire ça par un spécialiste, ça vous évitera bien des déboires dont une dégradation irréversible de l'acétate ders phares De toutes les façons ce genre de procédé ne dure pas dans le temps! A bonne entendeur, salut!... moi j'ai donné!
Hello! Thanks for watching and sharing your great experience! I appreciate that! Wish you all the best!
What is that u put in a coca cola can?
Hello! It’s cloroform CHCL3. Thanks for watching and leaving your comments! Have a nice day!
「数分で」は嘘だな
Thanks for watching! Have a nice day!
Bueno me convenciste
A Kia can be a vastly superior machine.
Thanks for watching! Have a nice day!
이걸 몇분만이라고. 할수있나?
Thanks for watching! Wishing you a great day!
This is not so easy,there are much easier ways to clean them....
Care to elaborate?
Thanks for watching! Have a nice day!
Hahaha clean in just a few minutes yet the video is over 12 minutes long and at a increased video speed so how long did it really take like 30 minutes
Thanks for watching! Wishing you a great day!
few minutes? lol
Hello! Thanks for watching and sharing your feedbacks! Wish you all the best!
Brak wzmianki czy to szkło czy plastik 😅
Thanks for watching and leaving your comments! Have a nice day!
Good luck finding glass headlights on modern cars.
you dont do that in glass ... that is plastic obviously
Właśnie ta sama wątpliwość mnie naszła, bo można sobie problemów narobić.