Thank you Nick. Your videos are very helpful. How do you get to the setup menu on a new 16IZ without turning RF Off? Once I turn off RF and go to setup, the link to my CGY760R is unsuccessful. Any thoughts? Thank you, Brad
at about 36 minutes you start talking about ..gyro.. Would it be correct to say that the gyro needs to be assigned to a switch or somehow linked to the setup and that the green symbol means that it has actually been done for that particular condition or bank or rate or whatever you want to call it
I've not used those particular servos, but I'm interested to know why you're doing it on the GPB1 instead of the SBUS menu on the Tx? I LOVE being able to plug SBUS2 servos into my 18SZ to centre them! :)
Yes, would be interesting, ‘cause I’m looking for two independent power inputs, but there’s only the free ELE2 port left for power input?…I will use all others for 3 swashplate, 1 rudder, 1 ESC, 1 telemetry …so I have to use a Y-cable, but this isn’t really smart🙁
The display on the transmitter is pretty much the same as on the program box. So what you see on his transmitter is what would be on the program box. So if you follow his video what steps he takes on the transmitter can also be duplicated on the GPB-1
HES USING TWO VIDEOS HERE,ONE FOR WHAT HES DOING,THE OTHER FOR THE RADIO ON ITS OWN,THEY ARE NOT SYNCHRONISED,ONE IS LAGGING BEHIND THE OTHER,SO YOU CANT KEEP TRACK OF WHAT HES TRYING TO SHOW YOU.ON HIS RADIO. ITS HIS OWN FAULT,HE SHOULD HAVE TAKEN MORE CARE WHEN HE MADE THE VIDEOS.
AWESOME!!! This was greatly needed
congratulations nick i had this initiative in portuguese but i'm still learning you are already an experienced person thank you
So we need part 2 of this video to finish setup in cgy . Thanks 👍😊
what cable is he using fpr the servo to plug into gpb1 and gyro?where do i get that cable from?it has two sockets
May I know what is the different between setting the reduce AFR and reduce Cyclic rate ?
Thank you
Thanks Nick! Great video 🔥👍🤘
Great video! just a question - do I need the programming device of the cgy760r if I use a T16IZ?
how do i turn on avcs elevator its either off or inh ?
Awesome Video! Very informative.
Thank you Nick. Your videos are very helpful. How do you get to the setup menu on a new 16IZ without turning RF Off? Once I turn off RF and go to setup, the link to my CGY760R is unsuccessful. Any thoughts? Thank you, Brad
Yessssssss. Thank you!!!!!!!
Thank you sooo much for this video!!!
at about 36 minutes you start talking about ..gyro.. Would it be correct to say that the gyro needs to be assigned to a switch or somehow linked to the setup and that the green symbol means that it has actually been done for that particular condition or bank or rate or whatever you want to call it
Thank you Nick!!!! Yess!
Would CGY760R Gyro work with a spectrum transmitter?
Will 3.1 version of the cgy760r not link to the t16iz? I'm thinking that's why it won't bind..
Hey buddy can the cgy760r work on goblin fireball and mini comet or doesn't support that small of a heli
this stuff only works with futaba servos!
I've not used those particular servos, but I'm interested to know why you're doing it on the GPB1 instead of the SBUS menu on the Tx? I LOVE being able to plug SBUS2 servos into my 18SZ to centre them! :)
The 760 pulse width can only be set on the GPB, it is not a choice in the radio.
@@dosta223 Ah of course, thanks Wes!
What did you use to power the gpb-1‽
Yes, would be interesting, ‘cause I’m looking for two independent power inputs, but there’s only the free ELE2 port left for power input?…I will use all others for 3 swashplate, 1 rudder, 1 ESC, 1 telemetry …so I have to use a Y-cable, but this isn’t really smart🙁
Great vid! Where did you get that CF boom?
CAN YOU SET IT UP WITH THE GPB-1 BOX
I just got back into flying . I got 16iz and went with the Ikon2 . I should of just went with this gyro instead.
When I do the recall, I get Failure! ??
and the setup in the gpb-1?
The display on the transmitter is pretty much the same as on the program box. So what you see on his transmitter is what would be on the program box. So if you follow his video what steps he takes on the transmitter can also be duplicated on the GPB-1
My gpb-1 doesn't have that s bus servo screen
my servo keeps failed???
Did you ever figure it out because I’m having the same problem.
🇮🇩👍🏻 Great
Does this guy ever answer his commentators?
HES USING TWO VIDEOS HERE,ONE FOR WHAT HES DOING,THE OTHER FOR THE RADIO ON ITS OWN,THEY ARE NOT SYNCHRONISED,ONE IS LAGGING BEHIND THE OTHER,SO YOU CANT KEEP TRACK OF WHAT HES TRYING TO SHOW YOU.ON HIS RADIO.
ITS HIS OWN FAULT,HE SHOULD HAVE TAKEN MORE CARE WHEN HE MADE THE VIDEOS.
Tara Parkway