Bought a center console out of a junkyard 2014 Fiesta SE and retrofitted it into my 2016 Fiesta S. Was in great condition and now the car is a lot more comfortable on longer trips. I also retrofitted cruise control.
As usual, your video is shot so well. Everything you're talking about is in the shot and in focus, and all of the audio is crystal clear. Besides the excellent general info, I appreciate how professionally done your videos are.
Cardboard is super handy. I made a few things out of a thin, pressed cardboard specifically for my car. I created a little storage unit with a cup holder between my seats. I also created four equal-sized containers in the trunk of my car with slots & shelves to organize all my stuff and I also cut out handles to easily carry them and remove it all from my trunk in a jiffy. I also measured and created two small boxes about the size of a large toolbox that fit behind the driver & passenger seat for storage - they are designed so that the seats won't collide with them no matter how much they shift or recline by fitting just inside that safe zone. I lost too many things in my car that I had to have a place for all the stuff I had in there instead of just throwing it inside somewhere.
great video as usual! to everyone asking where the shifter and handbrake are; these cars use a column type shifter that mounts to the steering column, and these cars are equipped with a "parking brake" not a handbrake that is a foot pedal.
There is a counter sink attachment that slides over a drill bit so when you make your pilot holes it tapers the end and your screws will always be flush. They are also adjustable on the bit so it doubles as a depth gauge, highly recommended.
Yessss! I need to make one for my first gen Scion Xb, tired of not having an arm rest. There are a few aftermarket options but I think I could make one with better storage like yours & maybe add the charging ports Great vid! Thanks
In germany the inspection will handle like: thats not original, we will take your car out of the register until you remove it. Highly illegal gangster! :D
if u use a bit smaller drillbit after you use the small one and just making a hole thats as big as the screw-head you will get it flush with the wood and ti will be less of a cheap look ;) allways smart to do :)
+ChrisFix hey I need some help, my truck got a tune up 2 years ago and ever since the front ac vents stopped blowing air . My truck only blows air at the feet and defroster. How do I fix this?????
That editing showing multiple drilling moments at the same time was brilliant! I'm thinking brilliantly difficult as well. I can't wait to make a center console myself. I pulled my old one for a repair and I couldn't make myself put it back because it didn't suit my needs at all. This video series is exciting and I can't wait to share with you a built center console myself. :)
Is it only me thinking here that the thickness of that wood is a bit overkill for this sort of application? Other than that, very well described process!
For ease of build. Also, might be fuckin a fat bii im the crown vic. Would crush her self esteem if she crushed your center console. Then you'd have to goto wendys and fond another
I would HIGHLY recommend cutting with a jigsaw if you plan on cutting wood by hand. Used one's are well under $50 and you can get them even new from Amazon for under $50. Makes cutting very simple, quick, and you can even cut curves!
Hey dude i just want to say “no offence” your video are perfect to fall asleep to. NOT that your boring i really like your video’s. I think in pictures and your explaination is so good that i see the whole video in my head and i fall asleep really quick because i’m already really relaxed about your voice so thanks dude 🔥
1st time I'm seen someone interested by this sad car crown victoria it's really on side of the way from the world of customized and even nice and modern parts renew like headlights or center console. u make me happy may friend about my car crow victoria. thanks hope and looking to many many of video customized and fix about this car.
I am buying an ex police crown victoria with the same no center console issue. Instead I just want an arm rest and holes that will expose an aftermarket radio that will be mounted under it. So that instead of the radio being mounted on the dash, it is mounted in the center console. I think it'll be sick. This video is perfect actually.
Man... you are a mind reader as well as master mechanic! I hate my center console for my 3000GT... it’s so unluxurious and designed for a smoker. I want a damn cup holder 😂 thanks for this video dude!
I am a big fan of your videos, ChrisFix. I really like how people like you simply give all this information to us, for Free!! You don't even ask for anything, you are indeed the best engineer and car mechanic on the internet! I just think that you didn't really need to split this video in two, it would have been better in one bit. Anyways, when is another police car interceptor video coming out?
+Chinmay Gupta Thanks! This video took two straight weeks of 14hr days (weekends included) to make. I needed to split it up because there is too much editing to do for the other video which will take me another week or two.
ChrisFix So its the production process, which holds you back.. I get it. I personally use PowerPoint for any kind of editing. We all just don't know how advanced it is. You can seriously make professional videos with it, considering you have the latest version and everything. I like how you can lift up the center console and fit a third person in your truck, but is it legal to be at the front without a seat-belt?
Thank you Chris I also have a crown victoria p71 and i love everything you're doing to yours.I would really like if you do more videos on it and you just got your self a new subscriber!!
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Excellent use of CAD. Cardboard Aided Design. Clever
+Gp1964turbo lol
+Gp1964turbo haha, I like that! I am now stealing your acronym haha
reading this comment while "working using autoCAD" but really just watching this video in a small window so no one can see im actually on youtube.
😂😂😭
I thought you meant Canadian dollars lol
His videos are at a nice pace. Doesn't take too much time to explain things, but also doesn't overlook important details.
Agreed!
+ian harris Thanks!
@@chrisfix l.. . . .p. . .
ian lastname Nice breakdown bro👏
Bia Tch don’t say that about the detail geek, who is like 200 percent better than you.
Chris fix, also known by his full name:
Christopher fixtopher
Christopher fixington
James Pumphrey
perfect
I don't know what grass y'all are on but I want it
His real name is Chris Magello
You didn't only fill the gap between these seats , you also filled the Gap in my heart .
lol seriously?
Aww. That’s actually cute.
no
*_IT'S TIME TO STOP!_*
@@savetheevo its been 4 years . Leave me alone .
who else watches his vids for entertainment not for acual use
me
+FordBoy332 Rigs of Rods me too
#RELATABLE
I'm like 16 and in Greece I can't drive until I'm 18. definitely not for actual use
Some I do for Entertainment, some for education and a lot for actual use.
7:09 why not bolt it in just like that?
Just like what?
+ChrisFix why make the wooden version when you have the fully functional cardboard one ready to go?
Haha
+MeLikeBigBoom haha, the new episode is live for you to find out!
Yo lmao, didn't expect to see you here, I haven't seen your vids in like 4 years
oh, published a few days ago. I was like: "where the fxxk is part 2?"
This Chris dude is quite a handy fellow.
Those videos are so relaxing to watch .I dont think i will ever build sumthing like this ... but you never know xD
Bought a center console out of a junkyard 2014 Fiesta SE and retrofitted it into my 2016 Fiesta S. Was in great condition and now the car is a lot more comfortable on longer trips. I also retrofitted cruise control.
As usual, your video is shot so well. Everything you're talking about is in the shot and in focus, and all of the audio is crystal clear. Besides the excellent general info, I appreciate how professionally done your videos are.
6:07. The arm rest feels real nice might just keep it like this
@李家富LEE KA FU haha
Chris that is awesome. I've been trying to figure out how to make a console for my 95 F150, and this video gave me so many ideas.
I actually love all your videos, they help so much, keep up the good work!
Thanks a lot! Glad you enjoy all of the videos!
The reason I like your videos is because you make it so understandable ! I feel way more confident working on my car after watching these.
Cardboard is super handy.
I made a few things out of a thin, pressed cardboard specifically for my car. I created a little storage unit with a cup holder between my seats. I also created four equal-sized containers in the trunk of my car with slots & shelves to organize all my stuff and I also cut out handles to easily carry them and remove it all from my trunk in a jiffy. I also measured and created two small boxes about the size of a large toolbox that fit behind the driver & passenger seat for storage - they are designed so that the seats won't collide with them no matter how much they shift or recline by fitting just inside that safe zone.
I lost too many things in my car that I had to have a place for all the stuff I had in there instead of just throwing it inside somewhere.
*Chris in his room recording for the video* “Look at THAT! NICE”
Everyone else in the house: 🤨
Drinking game: every time he says center console, you drink
+Drew lol
Lol vid is now ruined 😂😂😂
That's a good game!
Or material
Who are u? 🤣
Awesome job so far! can't wait to see the end product
Thanks Conner
great video as usual! to everyone asking where the shifter and handbrake are; these cars use a column type shifter that mounts to the steering column, and these cars are equipped with a "parking brake" not a handbrake that is a foot pedal.
Very good 👍
One in the front, one in the rear, that's what she said!!!
Thought the same thing
Apparently, someone hasn't heard the "That's what she said" 'joke' as it's refereed to. Timed right, it can be a great one. Timed wrong, it's trash.
What are you? 12?
2 good mounting points
@@roxss6538 12 inches deep in her
Yeah mental age is 12 at best. Had to do it. Sorry.
Why's the title in English and Im in America? It should be in American.
Omg
+RHAM oh, It's a nickname.. now I understand. lol
+RHAM Probably sarcasm mate-o
You won the Internet
+TheRealJayGutta FANTASTIC that was funny!!
My son and I just finish the project!! Thanks you
Show a picture! :)
J C how?
Just some dude post it to imgur then share the link
I remember watching this video a long time ago and I still love and remember it.
There is a counter sink attachment that slides over a drill bit so when you make your pilot holes it tapers the end and your screws will always be flush. They are also adjustable on the bit so it doubles as a depth gauge, highly recommended.
Why do I watch this, my car already has a really good center console xD
Yessss! I need to make one for my first gen Scion Xb, tired of not having an arm rest. There are a few aftermarket options but I think I could make one with better storage like yours & maybe add the charging ports
Great vid! Thanks
In germany the inspection will handle like: thats not original, we will take your car out of the register until you remove it. Highly illegal gangster! :D
+xCore0320 Dang, that stinks they are that picky.
+xCore0320 ''Is that an aftermarket airfilter? Sir, put your hands on the hood of the car.''
+ChrisFix Video title in Arabic nice
+xCore0320 Same thing in sweden
C'mon man don't exaggerate like that
Whoa you're channel has blown up! My jaw dropped when I saw how many subscribers you have now. You deserve it man. You're a wizard.
+SpaceManSpiff20001 Thanks a lot man! I really appreciate it and all of your support!
9:55 THE POWER OF EDITING!
+Ronaldo Rodriguez haha yes!
if u use a bit smaller drillbit after you use the small one and just making a hole thats as big as the screw-head you will get it flush with the wood and ti will be less of a cheap look ;) allways smart to do :)
Thanks for the tip!
ChrisFix Are you swedich or
Raging Robin or u can use a counter sink bit, quicker than re drilling the holes etc
I've been waiting so long! thanks Chris!
I should build this in my wood-shop class maybe
That's an awesome idea. Take pics and tag me if you do!
+ChrisFix hey I need some help, my truck got a tune up 2 years ago and ever since the front ac vents stopped blowing air . My truck only blows air at the feet and defroster. How do I fix this?????
+Jose Chavez could be a vaccum line that switches the vents possibly
+Brian Pardee ok thank you
Who knew 8 years later I would be following this for my crown vic...
That editing showing multiple drilling moments at the same time was brilliant! I'm thinking brilliantly difficult as well.
I can't wait to make a center console myself. I pulled my old one for a repair and I couldn't make myself put it back because it didn't suit my needs at all. This video series is exciting and I can't wait to share with you a built center console myself. :)
Is it only me thinking here that the thickness of that wood is a bit overkill for this sort of application? Other than that, very well described process!
For ease of build. Also, might be fuckin a fat bii im the crown vic. Would crush her self esteem if she crushed your center console. Then you'd have to goto wendys and fond another
Am I the only one that sees the title as:
"How to Build a Center Console for your Car"
I do
I do too lol
+zzzhuh i do
I di
Whats it supposed to say?
"Now that's nice and tight put one in the front and one in the rear" Lmfao
This guy deserves all the likes and subscribers he puts in real work making videos and above all they are worth watching.
Some say chris has every tool and machine known to man. I am A BELIEVER
My car came with a center console. However, it is tempting to make one just so I can have built in DC ports instead of lose ones in the glove-box.
The wood pieces be like:
We're screwed
Chris has a bunch of guys from all over the world to translate for him. Mine was in Swedish =)
Chris. I just got done watching the mid season opener for walking dead. Im so done with suspense tonight!! Lol i cant wait for part two!!!!
I still love the videos that you made 9-8 years ago. You say Hey guys! Chrisfix here. Without enthusiasm 😂
Wtf? Why is everyone talking about the title and description?
😂
+Wtrxprs007able Yea, it is kinda sad that is the focus of the comments when there is so much more to the video than a title.
Grammar, to me it doesn't really matter that much. I still notice it, but I don't care as it's not the point of the video.
Yo Chris you do An Excellent job on everything you do Are you a Certified Mechanic I'm just curious?
damn man no countersinking or wood glue? bet it squeaks after a few years
+duhjuh or maybe not
depends on how hard its used
+duhjuh I have had my center console in my truck for almost 4 years and it doesnt make any noise.
+duhjuh Also, no need to countersink since it will be covered in foam.
+duhjuh Thanks for the feedback! I never had any problems after years of doing this but I always like improving my work so I appreciate it!
Yep, was thinking the same.
chris videos are soo good that i watched this video and i donr even have a car nor does anyone need a center console .....Damn
You are spoiling that officer. Great job, keep it up😀
+Andrew Shaffer Thanks a lot Andrew!
+ChrisFix you're welcome🙂
Could you do a tutorial on how to run a compression test on a vehicle
Why is the title and description translated in german?
what do you mean I looked at the Title and the discriptiom everything is in english
+Matthew It's in Swedish for me.. Never seen that before.
+Matthew Well probaly because you live in Germany, it's Dutch for me because i live in the Netherlands, it's pretty weird.
+Linus Wenell samma för mig
Is it possible to turn that off..?
Armrest: does not exist.
Chrisfix: armrest feels really nice.
Idk why i feel bad writing this comment
Im planning on swapping the jump seat in my f150 for a console with switches lol this video is massive helpful
Nice video edit. I like the double you drilling. ha ha clever idea.
There's gotta be a way to build a center console for my dream car! (CLICK) Here we go now! (BEEP) (Clip activates) Chris: Hey guys ChrisFix here!
Wow, Video title in Polish.
It's in dutch for me lol
+Mi Key wtf german for me
+Mi Key and french for me ^^thats weird the description too
For me is Swedish
+Mi Key I'm from Poland and I can say you "that's Polish"
Chris didn't leave the link to buy the cardboard in the description
Disappointed
P.s. jk nice video
McDonald's gives theirs away.
Chris fix makes some of the best car vids he always explains every thing so good
This guy makes everything look very easy to do.. Good job man
+w00zi Thanks!
When will you paint the Honda del Sol. Or did you already?
The cardboard one didn't look that bad :)))
wtf why is the description in english?
+Frank Salazar lol
+Frank Salazar Why are you typing in French?
+M24A6 why are you typing in Spanish
+Luke Pickering Because I can only read Tibetan.
+Frank Salazar by my is it netherlands
I don’t have a car nor drive, just love watching your videos
Your channel is the best for DIY car stuff. Keep up the great videos.
The comment section made me realise how many viewers are Dutch.. like me
+Nova PS4 I have tons of awesome Dutch subscribers which is awesome!
And me😀
"Coming soon!" in ChrisFix language means in two months or longer. So se you in april again with the center console part two.
cool, but next time I recommend counter sinking the holes before putting the screws in.
I would HIGHLY recommend cutting with a jigsaw if you plan on cutting wood by hand. Used one's are well under $50 and you can get them even new from Amazon for under $50. Makes cutting very simple, quick, and you can even cut curves!
Hey dude i just want to say “no offence” your video are perfect to fall asleep to. NOT that your boring i really like your video’s. I think in pictures and your explaination is so good that i see the whole video in my head and i fall asleep really quick because i’m already really relaxed about your voice so thanks dude 🔥
Thanks home depot
this is titled in dutch why iam dutch but how
+Rushil Balgobind ik heb het ook hoe raar is da.
De titel word vertaald voor iedereen :p
mensen die niet gewoon de taal op engels zetten :')
+Vewser how can I turn it offm
+misterx243 Try switching your default language on RUclips to English.
Please don't translate the title and description
+Niels Kersic Thanks for the feedback!
Why would anyone thumbs down this, this is awesome!!!
1st time I'm seen someone interested by this sad car crown victoria it's really on side of the way from the world of customized and even nice and modern parts renew like headlights or center console.
u make me happy may friend about my car crow victoria.
thanks
hope and looking to many many of video customized and fix about this car.
That's not a centre console, it's a glove box/ arm rest!
Glovebox is in front of the passenger seat idiot
Yeah idiot
+Jacob Auckland I mean, maybe where you are from it is a glove box, but where I am from, it is a center console. Thanks for your feedback!
1:26chris fix face reveal
He said my friend can cut the wood for free but then he said I’ll just go pay for it and come back
The cutting was probably free but the wood is not
You are AMAZING. You promote productivity
I am buying an ex police crown victoria with the same no center console issue.
Instead I just want an arm rest and holes that will expose an aftermarket radio that will be mounted under it. So that instead of the radio being mounted on the dash, it is mounted in the center console. I think it'll be sick. This video is perfect actually.
why is the title translated? How ? Why ? I'm in California, isn't it suppose to be Spanish ?
+ealiev60 Why would it be Spanish if you clearly know English??
+PRESTIGER33 Sarcasm.
its french xD (Canada, Quebec, french people) ^^
MrRailBuff33 I was about to say that lol
lol for a second i thought that would be an german video
How many times he said material
⬇️
i enjoy how complete this is, like you show the entire process
Man... you are a mind reader as well as master mechanic! I hate my center console for my 3000GT... it’s so unluxurious and designed for a smoker. I want a damn cup holder 😂 thanks for this video dude!
Huh the title is translated to Dutch for me
A lot of screwing to do xD
+Dante Frost All part of the fun of making a center console lol
Amazing. Gonna do one for my '00 Civic Hatch. Need to make a cutout for the handbrake/drift control lever.
+JesusRockstarRedux Awesome! Take pics!
I really like the slick split screen video editing. Nice.
I am a big fan of your videos, ChrisFix. I really like how people like you simply give all this information to us, for Free!! You don't even ask for anything, you are indeed the best engineer and car mechanic on the internet! I just think that you didn't really need to split this video in two, it would have been better in one bit. Anyways, when is another police car interceptor video coming out?
+Chinmay Gupta Thanks! This video took two straight weeks of 14hr days (weekends included) to make. I needed to split it up because there is too much editing to do for the other video which will take me another week or two.
ChrisFix So its the production process, which holds you back.. I get it. I personally use PowerPoint for any kind of editing. We all just don't know how advanced it is. You can seriously make professional videos with it, considering you have the latest version and everything. I like how you can lift up the center console and fit a third person in your truck, but is it legal to be at the front without a seat-belt?
Your hand gestures are great!
love the new cinematography
+Malcolm Francisco Thanks! It was a necessity with this video. That 14min video you just watched was from 8hrs of footage!
Man I love your show , I have learn a lot from you ..straight forward and easy. Thank you Sir
Thanks a lot! Glad you are learning a lot.
Good craftsmanship , can' t imagine that you are so good at doing all these too , amazing , keep it up with more and more great videos
+Vanessa Guo Thanks a lot Vanessa!
Really clever using cardboard to get a template! Keep up the good work!
Sick editing skills at the wood drilling part
Beautiful editing 😩😍
Thanks a lot!
Awesome video Chris Thank you. Those stereo drilling scenes were the icing on the cake
thanks for the update on the project interceptor. I am really looking forward to see the next episode.
+red 69 c10 chevy No problem!
Thank you Chris I also have a crown victoria p71 and i love everything you're doing to yours.I would really like if you do more videos on it and you just got your self a new subscriber!!
+Keith Honeycutt Thanks Keith! Glad you subbed! Welcome aboard!