Best Blheli_32 FPV Drone ESC of 2018? // Holybro Tekko32 ESC Review and Noise Testing
HTML-код
- Опубликовано: 5 фев 2025
- Beware of Scammers Please Contact Only through My Email mesh.drone@gmail.com
Tekko32 ESC
www.banggood.c...
The Bundle I purchased with ESC
www.banggood.c...
------------------------------------
I highly recommend these boards over 2 months of testing best money can buy
Racerstar StarF4S
goo.gl/GeiaW1
Racerstar Star F3s
goo.gl/adcc2P
amzn.to/2A4J4Cl
---------------------------------------------------------------
The HEX driver I recommended which i bought 2 sets of (Must have if your into building)
goo.gl/mHW9HW
Batteries I use
www.banggood.c...
Camera I use
amzn.to/2iQHCwV
Standoffs I find to be the best
www.banggood.c...
Xt60 Premade I use
www.banggood.c...
Heat shrink I mentioned
www.banggood.c...
Soldering station
www.banggood.c...
Checkout the website for more details on the reviews
Website updated 2 to 4 days after the release of the video
dronemeshlab.com
Follow me on Facebook
/ dronemesh
Consider Following me and supporting on Patreon for Big giveaways.
/ dronemesh
Contact: mesh.drone@gmail.com
---------------------
Song Used
/ living-in-stereo
------------------------------------
Song Used info
Track was provided by NoCopyrightSounds
Paul Flint - Savage [NCS Release]
• Paul Flint - Savage | ...
Paul Flint
• / paulflintmusic
• / paulflintmusic
• / paulflintmusic
• / paulflintmu. .
• Mastering by redwolfmasterin...
Song: Distrion & Alex Skrindo - Lightning [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Distrion & Alex Skrind...
Download/Stream: ncs.io/LightningYO
ID: dj2938hd298hflahsknckdfhsidufh9398
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
I really love that board layout. I really like that you are testing esc's and I don't need to spend my time and budget to get these information's 😄
Great videos! I really appreciate all of the noise testing you do! Your fpv noise video was a huge help! I had a quad I simply could not get the video cleaned up on and with your info i was able to get it crystal clear. I never thought it could be worse using a bec.
The tekko 32 escs are Smoove but I've had four of them burn up. The last one on the bench testing motor direction right after installation. first one after a soft landing and the others right after flight. The only other escs I've had problems with we're kiss 24A. I've had a couple racerstar 20A burn. Never any problems with racerstar 30A and never any problems with Dys 20Aor 30A. Of course I went over board listening to Drone mesh and purchased 8 sets. So I've got a lot of spares. All they do is catch fire.
How is the reliability of holybro? Is it more reliable than spedix? Everywhere I look, spedix is praised for its reliability and durability. Also, would the spedix gs35a escs run 48khz?
Nice damn testing, the best around! (Btw, the Holybro Kakute F4 AIO V2 that you looked at yesterday just went on sale at Banggood for $123- downright reasonable now). Thanks for the video!!!
I can’t believe you have the patience to wait for those ESC’s you reviewed come in the mail 😂 But anyways thank you for all the reviews!!!!
do you have any plans to test the Dal engine 4-in-1 esc ?
Hi, what do you think of using this esc with Raceflight and multishot? Does it perform the same ?
Since they are almost at the same price point, can you do a Kiss 24A esc review?
These are airbot wraith v2. You can get them at iflight under ipeaka name as well
MrBirdshell666 indeed. It’s an OEM version of that. Same as iPeaka. 1800uf cap😊
Funny thing is that Drone Mesh already tested Wraiths before and have the result on the test page of his :D I was wondering if he ever tells that those are wraiths.......those even have the same symbol as wraiths
+Chemistt These are wraith inspired and the filtration and layout is completly different I mentioned this in the window shopping video. Before I got these
he tested v1
Drone Mesh oh yes you tested V1, sorry 😕 the layout is exactly the same as Airbot Wraith v2...I am looking at those right now. Plus is, I guess that I bought those v2 based on your v1 rating from drone mesh lab 😀
Would you consider testing Aikon 32-bit 35A 2-6S ESC?
I bought 8 sets of these escs because of Drone mesh review. The caps we're knocked off two escs,and three caught fire for no reason. That never happened before with racerstar,or Dys escs. I wanted to like them, but there seems to be a problem with them!
Wow... That's too good to be true! O.o I'm really impressed!
Please always measures dc capacitance at power terminals for these or FC because for FC for example having around 800uf at input almost assures you to get good noise filtering. And with an additional capacitor it is ultrasafe (usually 330uf for me). We could add also on these 330uf LESR. Please do it in the video each time and Thx for your work. Did you see that LeDrib started a 2nd channel with only build video... Hehehe They noticed your great work an success. But as soon as you don't use make up (:o) I stick with the original.
Thanks Bud for another great review.
I lost the most bottom cap on right row if having the 3 motor wire connetion closest to you...would this cause a problem or still flyable?
Drone Mesh I dont really understand what is the difference between these and Wraiths that you tested before. Even the symbol near signal pad is the same...and it seems that the results are the same...I am not saying that its a bad thing...these are excellent ESC....
the wraith32 v2s look identical. Must be re-branded.
A little early in the year for this don't ya think lol
Man where have you been I missed ya.. Yes but 2017 is old school now and this thing was received in 2018 usually something like this happens about every 3 to 6 months.
Drone Mesh I'm always here..... Lurking lololol
Drone Mesh I'm waiting for the 4in1 results
RCFlyer85 it’s true I’ve seen him here in the shadows....
Mini Quads Mega Fun lol..
How should we mount this escs? Mosfets side facing up or caps side facing up?
Great info as always
Tnx for the great vid as always! :) Do you test with a prop on the motor? Same prop and motor for all tests? Cheers
GITech yes same prop same motor always you'll see the setup in next video.
Hello Mesh. I ve these escs and noticed they run hotter than my old littlebees. when quad powered on and didnt even armed they became warmer.(led is working) On osd I ve activated esc temperature and noticed they are 50 degrees C.(on the bench just powered on) Is this normal ? should I be worried ?
Isn't this almost identical to the Airbot Wraith v2? Is this a nicer ESC than the wraith?
Maybe best so far lol pretty early to call it best of 18 dont ya think? I guess ill watch the video now haha love your videos though definitely educational and no one else is doing it
Do you know if they will make a 4in1?
What is the use of programmable pwm frequency? What does it effect? default on BLHELI32 is 24khz. Is it bad to run 32khz or even 48khz?? I can't really find anything on this subject would love to see a video about this. Also performance differences.
I am running the RTF Wraith32 v2 which look identical to these. Thanks
This esc will also work with Matek F405-STD BetaFlight STM32F405 Flight Controller?
Those esc's look sick
Hey drone mesh can you test the Wraith 32 v2? Maybe no need to because it looks identical with 18caps, 2 tant caps, telemetry is in the center of ground and signal wires like the holybro Tekko. What do you think?
I'd love to see a testof the new HGLRC F440 20x20mm 4in1 40A ESC. It seems to be a powerhouse in a tiny package.
waw the tekko is amasing sine wave is looks so pure
du u have a spreed sheet whit the esc noise data a qustion do motors make noise
I don't own these but they look like the Wraith 32 v2 model. I have had two of the Wraith 32 v2 burst into flame on the bench. They were replaced by Airbot with a new one called the Furling 32. I am not happy with the Furling 32s as I have had 4 of the esc loose their mounting pad for the signal wire (x2) and the telemetry wire (x2). I have soldered for many years and have never lost pads like the ones on the Furling32. No, I did not hold the soldering iron on the pad for long. Just enough to place a drop of solder to tin the pad and then just enough (about a 1 second) to mount the wire. They actually came loose while I was soldering up another ESC on the same quad. Now I am looking for a replacement. I think I will order the Aikon AK 32.
Won't be buying anymore Airbot equipment.
Hi,
Is it compatible with Pixhawk PX4 2.4.8 Flight Controller?
The question is, are wraith32 v2 worth the extra 5bucks over speedix?
What's the rail by the shunt resistor for? solder? Increase voltage?
I think you are supposed to line it with a thick layer of solder to increase current carrying capacity.
That looked clean . But how big are the squares where you film on? 5mm?
10mm
Daniel Stinebaugh danke 😜ihr bist eine deutcher . I talk it bttr then i write 😆(same as englisch) but of course it is 1cm (it could also be inches) but they are long escs then or not
Hey is it me or is the first esc on the very left a Wraith32 v2?? and the one on the far right is holybro!? You can see the holybro written on the right one and the Wraith symbol on the very left ESC. Center one is flipped over and can't see the decal.
If these are clones of Airbots Wraith32, then why not use the originals which are actually cheaper at $16 each?
Your vids are getting really adroit in the verbage in like intro specs and stuff- makes it really entertaining as well as educational I will continue tuning in for the best stats on equipment and dreaming
Vert great video thanks ! And please you have to try the Spedix GS30 BlHeli32
+FreezFrost I have
FreezFrost they don't have any special specs on the bench they r real world great esc's tho
You mean you already did it ?
Ok thanks QuadbotPFV !
I notice your scope current trace is in sync with the voltage signal, somethings wrong, they should be 180 degrees out of phase. Hi current drawing from battery ( you said amperage going in to ecs) should create lower voltage (simple ohm's law IR drop). You need to show your test setup or explain better how your testing, where are your probes? Also showing throttle signal would help and computer controlled to keep testing the same between each esc. Are you doing hard braking in these tests? What was the input current during these tests (20A, 30A, 40A ?) 17mm wide is a fat esc, fine if you run fat arms.
+Ozzy3333333 Yes the probe I'm using is inverted for some reason It's the only one I could afford at the time.
Here is a probe for $4 non-inverting www.ebay.com/itm/High-Quality-P6100-Oscilloscope-Probe-DC-6MHz-DC-100MHz-Scope-Clip-Probe-FC/152856015953?hash=item2396edb451:g:5XgAAOSwRwhZqMtU, but you scope might be able to invert your signal too.
That’s a nice esc
The leds cud be on both sides cause they don't kno which side yu will chose to face up on the arms of the quad..js
these are the same? www.drone-fpv-racer.com/en/holybro-tekko32-f3-esc-blheli32-3772.html are better or worst?
Isn't it a little bit to early to call out the best esc of 2018 now? ^_^ hehe
Wraith 32 v2 .
Yep, direct copy of Arbot Wraith32 v2.
4 in 1 version !!!!!!!
The first 😍
I can't stand the price and weight of this Board no matter how well they perform
Want
I bought 4 of these escs from helidirect.
One the led did not work
One was arking between the caps
One burst into flames after about 2 minutes.
Of the 4 only 1 worked correctly
These escs are garbage
Don't waste your money on these.
Lol best of 2018... its 10 days into 2018.
First