Troy-Bilt/Yard Machine Drive Belts Replacement (7 Speed Mower)
HTML-код
- Опубликовано: 9 сен 2024
- In "Blademan & Throttle: The Ultimate Choke-Out", Taryl shows you how to replace the drive belts on a Troy-Bilt / Yard Machine 7-speed riding mower. In another episode of "Blademan & Throttle", The Choker tries to give Throttle "The Ultimate Choke-Out". Can Blademan save him in time?? Stay tuned until the end for the exciting and hilarious conclusion. And There's Your Dinner!!!
Please Subscribe to the channel and Thumbs Up our videos and be sure to 'Like' Us on Facebook for all the latest news and updates!
You can pick up all your TARYL APPAREL here: www.tarylfixesa...
(T-Shirts, Coffee Mugs, Shop Products and More!) Shippping worldwide and daily!
LIKE us on FACEBOOK! / tarylfixesall
We're on INSTAGRAM too! @tarylfixesall
tarylfixesall....
#smallenginerepair #drivebelt #blademanandthrottle #mtd #troybilt #yardmachine #ridingmower #mower #lawnmower #gardentractor #thechoker #thejoker #batmanandrobin #batman #parody #dccomics #marvel #tractor #tarylfixesall #grassratsgarage
Crossville TN here, and Thank You so much for your help with this. I was trying to do this without going through the battery compartment and found it very hard.
Thanks to You, even though my lower belt looked good, I am going to replace it anyway. The top belt broke and She would not move.
This guys is the man. First how to video on something I’ve never rebuilt that went almost only once through without rewinding and yelling “not on my mower it don’t”. I have a different model but seems like they are assembled the exact same way. Thanks for the how to. Saved me 500$ in labor at the SER shop.
I am a 50 year old woman and because of your video I found the confidence in myself to attempt this. Let’s just say it ate my lunch. The old upper drive belt popped. And it was stuck on the pulley after listening better to your video. I realized I needed to put the parking brake on and then that pulley got loose and I got the belt right off. That was only after I pulled on it and pulled and pulled for about 30 minutes. If only I would’ve listened a little better. I didn’t know if I was gonna have the strength to crack the nut on the pulley but because of your screwdriver trick, I managed to do it. This feels fantastic knowing I didn’t have to get my 69-year-old father over here to help me do this.
Hi Taryl, I have a 2007 Troy-bilt Pony Model 13AN77TG766 and I followed your video to change the upper and lower drive belt and took it for a test drive. When the parking brake was engaged I moved the transmission from neutral to forward and my mower started moving forward as if it was in 7th gear (almost did a backflip lol). So I put it back into neutral and cut the engine and followed your brakes video and cleaned and adjusted the brakes. Afterwards the parking brake worked correctly and the brakes also worked correctly. I took it for another test drive and again after moving the transmission into forward it was moving forward with the parking brake engaged. So I thought I did something wrong and took everything back apart and this time took the variable speed pully out to inspect it along with the bearings. The bearings needed to be changed so I did that and once again put everything back together and took it for another test drive. Long story short I am still having the same issue when putting the mower into forward or reverse when the parking brake is engaged it is moving and seems to be in the 7th gear. Not sure what to do at this point. Any tips would be greatly appreciated. Really enjoy your videos.
Im having this same issue on the exact mower you have.. what was the solution??
Good job…..thank u…..will always watch your videos….
Hey Bro.......i just came back in the house to tell you...i did what you said.....blocked the tank from leaks took out my battree........flipped my lil Red Bull ( LTX 1842)... on its side with a stool chair i had out in my shed for years ....totally useless stool has redemed itself .........got to my drive belt with no problem .......you got a new student....thanx Dude......
Just replaced these belts on my neighbor's Troy-Bilt Pony. That variable speed pulley and two belt system has to be the goofiest set up ever devised to run a mower! Straight out of the Rube Goldberg School of Mechanical Engineering. I'm glad I've got an AYP hydro drive machine. Couldn't have done it without this video though. THANKS!
I came back just to watch the ending again. That's just so funny. Lol
When Blademan said he pissed in the salsa, I have to admit my own bladder let loose. Glad he got to Throttle on time or the dynamic duo would now be the dynamic uno. Great tips from Taryl too, like the spring yanker. Always laugh, and always learn something new. Thanks guys!
Great video as always Taryl. thanks for sharing the knowledge. You make it so much easier showing the short cuts to get through the repair easier and faster in time for dinner lol.
Melbourne Australia here: Thanks Taryl, you put a lot of work into these videos and it's really much appreciated. The knowledge on how to do this stuff is generally found by trial and error, you save us all a bunch of time. These mower manufacturer bastards could maybe look into how their Frankenstein creations are maintained once in a while - seems to be a forgotten part of the design process...
Thanks for this vid. My drive belt shredded into pieces and I would have never fixed this myself without finding this video.
Entertaining and informative. "Love what you do and you'll never work a day in your life". I have the 7 speed w/out shift on the go. I will never buy another Troybilt again in my life if I have anything to say about it. I did just put a new $21 carb from eBay on it and now it starts easy and idles. Hasn't idled in the 5 yrs. I've owned the thing. It sounded so smooth my neighbor came over and commented on how smooth it sounds!!!???
You are one crazy son of a buck. I almost broke my stitches. I can see I'm to dam serious.Thanks for the great videos.You are one of a kind.I love it. give us more.
You guys are mental.
Thats good!
Great video.
You ain't right. Love the vids
It was the parking brake releasing the tension that got me. Access to belts on riding mowers is way way way more difficult than my walk-behind Lesco mowers. I'm not used to all the extra steps for what is such an easy swap on a walk-behind. You did a great job of explaining the steps and tricks of your trade! Thanks
See where they go
Same here. Until I listened better and put parking brake on I could not get old belt off!!!
did that repair today, except with the mower on it's side, my son removed the spring from the transmission drive belt tensioner pully and it literally fell off, amazing
Replaced my belts on my " Troy Built ", MTD last year, and I would rather been in a Bar Fight and lost, then to go through
that again. Apparently mine is a older model, it has a Go Petal, rather then a 1-7 speed control. And you have to Pawn your first born to buy the belts, but then I did buy factory belts.
Hope you made Choker eat the rest of that Salsa, serves him right. He seems to look a little like Slippers....But that could not be slippers, Hes a nice guy, weird but nice. Oscar Material fur shure.
Thanks for all the repair videos... you have been my teacher online and thanks to you and I was able to save money in the repairs of my MTD continue making serious videos and with the touch of sense of humor...Thank!!
Oscar winning performance
Did he say: "Maybe because I pissed in it"....at the end? These videos are hilarious, and informative! Thank you!
He's wearing three costumes at the same time. Genius!
This better than TV
I just bought one of these Pony Mowers and this is much needed knowledge for later down the road. The Pony replaced a 21 year old Murry 14.5 hp 40 inch cut with a Tecumseh. Thanks for doing these Educational Video's and the Comedy is Bonus!!!!
That's the best video I've ever seen.
It's not the tractor I need to fix but God damn I'm so emotionally invested in whether or not throttle gets the ultimate choke out!
What am I watching right now? 😂😂
hey taryl..you must have a good air conditioner in your shop because you don't hardly ever break a sweat. great video, keep em coming!
Doesn't get any better . 👍👍😎
Thank y’all picture show is great, thanks for the step by step video.
I have a hint for all on here. My buddy tears apart microwave ovens for the copper and other metals. He gives me the magnets sometimes. They are 3 to 4 inches across something like a speaker magnet.
Ok when you undo your pins on the deck the arm almost always falls down and the deck is hard to slide out cause they get in the way.
Put a magnet on the frame and put the arm on the magnet Voila.... third hand. Do both sides and you don't have to call Hunny outside to help you.
I also put a mag on the decks of mowers to hold the pins and bolts. Small sockets won't roll around and fall on the ground either !!!!
Hope this helps ~!~! From a very wet Cajun Country Yep we are still flooded here !!!!
I’m getting a hint of Bobby Possumcods! Lol
I don't weld those idler arm spring holes anymore. I just go right beside it and still a new one
Thank you for sharing this video, it help me alot
Thanks Taryl this was informative and entertaining
I will mention, although you being the more experienced mechanic versus myself, that the 35" belt underneath the seat, that's the only riding lawn mower I've ever seen that there were bolts to hook the spring on to, as shown extremely briefly around 18:40. I recently undertook this job, and on my tractor, there was a hole in the frame that the spring went through as well as a hole on the bracket that the pulley was bolted to. Just a mention, those bolts might not be OEM.
I actually watched the end, lol nice video blademan and throttle
You guys are so funny and full of it
Thank You’ll 😊
You’ll go to a lot of trouble and expense to entertain US mechanics and DIY folks
Thank You’ll for laughing and having fun
Merry Christmas
Great video Taryl. Blademan and Throttle are my favorite. I can't wait until next time... Same blade time, same blade channel!
My neighbor across the street brought me her mower that she flipped completely upside down because she thought that's how to clean it!
There was oil coming out of the muffkin!
Just what I needed!!
What an ending! You are the master!
Also another thing to do if you need to change the belt on one of these mowers is take the body off it's a lot easier to work on 4 bolts on the seat and 2 under each foot pad
can you do a video on adjusting the brake linkage and brake pedal on the MTD / troy bilt?
See you next week, same Blade time, same Blade channel!
The choker is my new favorite villain.
THANKS TARYL GOOD INFORMATION ...........THERE'S YOUR DINNER.......
that seat spring is a beast to put back on......big flat head screw driver and a lot of heavy pulling to get it to hook on back of seat mount
For sure
Love the video brother!! You're a crazy fool but love the information and entertainment!! Keep up the good work
I was so worried about Throttle. Glad Blademan saved him in the nick of time and gave that hideous Choker exactly what he deserved. Well done Taryl.
Thank you!
Love the video. I was able to do the work myself. Thanks
Why does MTD have to make everything more complicated than it has to be?
Thanks your video helped me tremendously.
The rod on the front of the deck, is used to raise the front of the deck up TO keep grass and sticks floating into the pullies> If it rattles when mowing or driving it around NEED TO TIGHTEN THIS ROD UP SOME!
thanks Taryl keep the videos coming. Good information.
Will do. Thank you for watching! There's yur dinner!
Excelent video
Ur the man Taryl 🎉
Taryl, some of us have problems with getting the 7 speed Pony's to work right. I used OEM belts and I only have one speed -FAST! Please go through wear points, and adjustments to get this system to work corrrectly assuming we have used OEM MTD belts, and assuming our Variable pully is working properly
You have to play
a "fart" sound effect
when you torque those bolts...
"$h!t... That's tight.!"
dont know if you still have that mower, but i am having trouble with mine. it is the same as the one you have, my problem is . . . the fuse box.
one wire goes into the harness, the other is loose and i do not know where it was attached to.
do a video of where the wires go, especially the loose one.
plz do not make the vid short.
<
<
mower has no juice at the ignition switch because of that wire.
thank you .
[p.s.
yes i checked the solenoid it works like it should [ 2 pole with 2 spades ] .
checked both deadman switches [ left brake press and the PTO engagement on the right, both work as it should ]
battery is very good . . . 12.47 V
ignition switch is good eventho i purchased a new one . . . . same issue with the new one .
that is when i saw the problem . . .the fuse wire .
i like your videos , and you and your team do not disappoint on humor , experience and know how .
i subbed and also clicked the like button for the video .
funny stuff, I was riding my tractor and drinking my beer when I ran up on my box blade and got it stuck rite there. the tractor begin to smokn while I finished my Brew till I figure it out to turn off the motor 🐿️ but it was too late for my belt it got the screw. so I toed er back to camp and that's when I found this awesome video show.,teaching me how to keep my belt round and my old tractor on the go. thank YA, thank ya very much💀🐧🤘
well done that man , as they say in northern Ireland , keep her lit man , thumbs up
Man if it is that easy to rid of assholes I wanna start hangin out with Taryl. I'm gonna bring all my ah friends along...
Dude! that was a wicked video! Great job Boys
Very Good Teacher THANKS
Goofy. But VERY Good! Going to do this when parts arrive. My problem was : variable pulley heating up....throwing upper belt. Going to replace pulley, all belts, and bearing in the pulley. Hope it works. THANK YOU!
Excellent !
I learned alot and got a kick out your video. Thanks.
very helpful video, thanks ,
Brilliant people ♥️👁️👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
thank you so much for sharing, great video!
Nice work! Thanks!
There 1 little trick I do with the engagement cable spring! Bend the end of hook to the side a bit. This make it a lot easier to hook back and unhook >>> I would recommend Buying a pair of Mechanic sleeve, and gloves to working on your riding lawn mower. Save your hands and arms from being all bruised and cut up
Do you recommend factory belts or generic from Amazon?
Hey Taryl, take that lawn tractor back in the shop, you put everything back together without replacing the one headlight! lol
Can you give part numbers for the drive belt and engine to trans belt? Thanks
Only in America I love it
I saw you had 12 ounces of Hamms encouragement on the shop bench Taryl.
Another great video......good job guys !!!!
great video man
Thanks a lot ....you help me so much ! Now i am subscript ( From BRAZIL )
Hey thx for the video man ! Can you please tell me what belt that is that goes from the top pulley at the engine, all the way to the bottom of the pulley in the back ? Part number if possible. Thx
Can you say "Nighthawks" ? Sweet end scene, there Sly....um, Blademan!
Superb again gents . Looks like the coker got busted.
I need a few of them hats .....and size three X t-shirts....
I need brake replacement on a tb30r, but u guys r awesome!
gosh they never send onstructions anymore..lol
Hi, Enjoyed your video on changing out the belts on a Troy-bilt. I have a Huskee, model 13WV771S031. (looks very similar to the machine you were working on). It cranks great, mows great on low speed, but when I increase the speed above 5, it starts chocking down. I cleaned out gas tank, changed fuel line and fuel filter and Had carburetor "rebuilt". I had to replace one spindle and two brake assemblies on deck. Will also replace all belts. Before I put everything back together, can you tell me if there is anything else I need to check (maybe switches) that might be causing it to chock down when the blades are engaged and on higher than 5 speed? (BTW, I can run the mower on high speed without the blades engaged and it runs great). Thank you for any suggestions and keep posting the videos. Janis
Well I used a bir grinder and remove enough material on bar to get my 7/8 socket on it
so good!
Great video wish you lived near me 🙂
i know you are a professional I'm also a hill Billy. i like your videos even though you pretend your short of a few washers and grease zerks keep up the good professional side
great again
If you're still around --- great video. I have a problem with an LT 1500 Craftsman - it has two drive belts and one deck belt. The deck belt is no problem but the drive belts look formidable. Can you do one of those?
Had to replace bearings on variable speed pulley. Pulled off casing but bearings on there are stuck on good. What's best way to get them off? Thx
How did you remove the front pulley without turning the engine?
I have watched this video 3 times. Great video. Did Blademan piss in Choker's salsa? If so, choker deserves it! LMAO! Cant wait for next video.
Taryl. On a 2017 Pony the pulley goes dish side up. Just FYI. If you put it flat side up then the belt will be at an downward angle and tear the belt up in a couple months... Ask me how I know...
thanks Taryl ...
3:48 I though you said "shit on the go". I was confused till the camera panned.