Trying the Makita 36v Chainsaw
HTML-код
- Опубликовано: 25 июн 2019
- 2x full 6 ah Batteries, 150x150mm Posts, how will the Makita 18v Chainsaw do?
Music by Bonus Points / bonuspoints
...
I'M ON INSTAGRAM TOO
scottbrownc...
The below are affiliate links. I get a small percentage when you buy using these links. It does not cost you anything extra, but helps supports the channel. Thanks!
My Tools
Tool belt amzn.to/3dXMZnk
Tool belt shoulder straps amzn.to/3AI0VLU
Hammer with wooden handle amzn.to/3jRhQ92
Rubber grip for hammer amzn.to/3jTM7UE
Speed Square amzn.to/3yAaE5f
Makita Circular Saw amzn.to/3qYzaKH
Track Saw amzn.to/3dV9wkF
Awesome ratchet clamp amzn.to/3dSGa6s
Impact driver (main drill) amzn.to/3xDmBat
Other drill for pilot holes amzn.to/3yAYjh4
My Table Saw amzn.to/2UzuOxp
My favourite vacuum (newer version) amzn.to/3yxss0S
Full face mask amzn.to/3hH4Cce
Ear muffs amzn.to/3yNAWBl
Green line laser level amzn.to/3yqYdJ0
The Camera Gear I use
Main Camera amzn.to/3AD2if5
Backup Camera amzn.to/3jTGTbv
Main Lens (main camera) amzn.to/3wp0hzU
Lens for Backup Camera amzn.to/3jWaFfU
Microphone amzn.to/36pNWAA
Tripod amzn.to/3yxSeCb
Headphones amzn.to/3xqm2R4
Drone amzn.to/3xp9OrO
Aeropress (Coffee) amzn.to/3ijpvdQ
Donate here if you want to help the channel, thanks!
www.paypal.com/cgi-bin/webscr...
SEND STUFF TO HERE
PO BOX 3506
Richmond 7050
New Zealand
Disclaimer: These videos are intended to provide information and inspiration only. If you choose to imitate, duplicate or copy anything you may have observed in these videos, you do so at your own risk. Scott Brown Carpentry Ltd does not take any responsibility for any action taken as a result of the information or advice on this RUclips channel and shall not have any liability in respect of any injury or damage that may result. To view full disclaimer, click here: www.scottbrowncarpentry.com/d... 
Хобби
For me, the ideas in ruclips.net/user/postUgkxy_pn55PK60wAV3X_C_RoLS_67mNonoCE Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.
You deserve 5 million my friend.. love the vids.. keep it up
Congratulations on your Subscriber numbers!! Well deserved.. well done. SBC😎
Congratulations on 50K subs. Keep up the good work.
I love your channel. You're an inspiration.
Congratulations on the 50 thou subs. Yet another exciting episode.
Yeah boy! Congrats on 50k subs bro!
A bit late today with the comment...but VERRY EXCITED of the new episode of Scott Brown !!!! KEEP THEM COMMING SCOTT !!!!! 👏👏👏🤩🤩🤩
Hey Scott great video you are a inspiration
Congrats on 50k subs!
Congratulations on your 50K. I got my 1K today, 49 to go hahahaha. Great video again my friend. I like this project because i have been a garderer for 16 years and did a few projects simular like you do here.
Congratulations on 50k subs :)
Congrats for 50k 🎉
i use this chainsaw too. cutting windows in log cabins. Good saw :)
Damn that was amazing telling us where to go in the video , for that reason only im gona watch the whole thing
Congrats on 50K. 👍👍
Well earned mate keep up the good work
bro i love this content so much
50k already? Congrats bro!
im gone for a week and you hit 50,000k SUBS, great job man.
Congrats on 50k .... its because its so exciting .... every time !!!
😂🤣
Shot on the 50k subs scott
Just bought this chainsaw and used it to do a custom 6x6 timber pathway for a customer, paid for itself that job
Man I want to meet the guy with the Gold in the Truck..... - Vermont USA
Love the vids Scott already saving for a trip too New Zealand!
Congratulations on 50k man, love the videos where did you get the makita sunglasses from?
Love your work
Your background music is awesome, should put out a CD bro
awesome on that 50k mate - power! 💪
Good stuff as per SB!
Love you videos
Hey Scott. love the vids. How’s the Cordless sander going for you?
Fantastick . 👍🏼👍🏼👍🏼👍🏼 Scott.
So man subscribers proves the quality of your vids mate.
They cut out on heat in the battery i think. Mine does that when I run it flat out. I use a few batteries when needing to run them for a long time, just let the others cool and go again.
Cheers Scott Brown. We normally say howdy in Tennessee.
Certified badass
I think I was your 50000th subscriber. No joke!!
I was his 50th - no joke!
Wow! That must have been over a year ago. How many subs have we got in that year :(
@@ToolsAndStuffOFFICIAL I had more than him for ages.....(looks down and weeps)
51k now 27/6/19 keep it up !!
Nice nice Scotty
Hello Mate, is that pressure treated material or something else? It looks nice!
Scott if u used a flappy disk on the battery grinder it would of made cleaning up those posts much faster mate just a quick tip that is how the boat builder do it bc that is the fastest way of doing it
You made me love carpentry i hope we meet some day ..
Was in the first 50 subs club
Congrats on 50000. Not sure about contracter brand chainsaws. You can pick up a husky or a stihl with battery and charger for cheaper than just the Makita dewalt or milwaukee skins.
I like the work van
On behalf of everyone who has subscribed: you're welcome 😁 thanks for being the Casey neistat of carpentry
walls looking good boys
How thick are the boards you are using. Congrats on the subs
Slick work , go SBC :)
You got 50,000 subscribers because you are a genuinely nice person. (Potter too) You are very creative. Your music choices are great. You do interesting projects. All that is missing is an interview with your girlfriend.
*Paerau 😊
@@dressjess 😆
Why not leave the post tops angled for runoff of water or will they be capped somehow in the future? And congrats of 50K. It's all growth from here.
I usually angle mine.
He's putting a cap on the top as mentioned in the previous vid
I honestly thought you were joking when you said you were gonna cut the posts with a chainsaw 😜🤣
Congrats on 50k Scott, but the van's looking a bit messy 🤔
you seen the new wet and dry makita hoover ?
Wonder how long that wood post last. I like thing last really long
Does the Makita track saw work for left handed people
Being a leftie and owning a Makita track saw, it definitely works for left handed people. The thing you need to be mindful of is your body being close to the blade side of the saw, which can be an advantage. And don't be tempted to place your right hand below the work piece to support the off cut material, while cutting. Be careful.
Hi Scott, shane here. also living in auckland. i am going to buy a festool vacuum for my dewalt miter saw. just want to know how you conect the vacuum onto the drop saw, or any modification needed
dont know weather your could find my message, i hope you can.
thank you so much ...
Nice chainsaw chaps
17 posts?! did you not cut them all twice? (17 + 17 =34?)
Pistol Knight nah he only cut off the 2 long ones.. so 19 cuts if you want to be fussy..
Even if he cut them twice, it's still only 17 posts. 😁
He said “17 cuts” first. He said “17 posts afterwards”. The number of posts is irrelevant. Only the number of cuts matters.
Wasn’t it 18 1 by the van at 3.13
If those batts are 3bars+ the saw is cutting out due to battery overheating. 30+ cuts back to back is quite a lot.
Where do you get your music for your videos?
Well deserved love the channel. Set up patreon
It is a chainsaw-BAR, not a "Blade" :-)
Love your videos.
All the best from Norway.
The bar is the part that the chain runs around.
Congratulations on 50k subs mate well deserved!! Brilliant content
man who would ever skip a scott brown vid ! shame on you people...
50 g's baby!!!
What Will the Shed be Used For?
GASTON !!!!
Hehe I'm a tree man. CHAINSAWS DO NOT HAVE BLADES! 😅😉
Get some chainsaw chaps and helmet with visor. It may seem overkill but even a little electric chainsaw can do some serious damage when it kicks back and you go in to your body.
These saws don't kick back, they cut out first.
Is the double retaining wall to get around the height issue of a metre before you need a guard rail. Also I'm that guy....chainsaws don't have blades...
You have a very good channel keep it up!! on another note, imagine if you would be visited by the 50k subscribers....all at once:)))))))))))))))))that would be the biggest party in NZ I guess:))))))
Thems is 6x6 posts right ?
try different batteries mine dosnt cut out till the batteries are close to flat and I have been cutting hardwood trees up to 15 20cm thick it won't go through those as fast but I can get down to 1 bar battery before it starts to cut out and I can still get a few more branches in before it quits. Ive been using mine for 3 years and really abused it but it keeps on going.
greetings from london, u.k. play button before you know it.
Can anyone tell this rookie (me, not Scott!) why tongue & groove a retaining wall? Looking to build one soon!
It helps prevent the boards from moving and twisting between posts. Also, helps stop the weeds growing through your wall 😁
Scott Brown Carpentry - thanks so much for the tip off! By the way, I am weighing up your method here vs. a railway sleeper method for a 1200mm x 5000mm wall. Hoping to put a bench into the plan of the wall, too.
Any thoughts on best method or tops tips, please?
Loving the channel by the way!
😯🙂👍👍👍👌
Forget the Makita chainsaw, check the Makita sunglasses.
Cutting out could be from the batteries getting too warm.
It's because you jam the chain. It's a cutout system to make sure the tool does not overheat. The chain needs to do the cutting. Pushing harder stops the chain from freely rotating.
@@paulhood66 chain did not jam.
The electric chainsaws need to be operated slightly different to convential ones. Not pushing too hard and keeping the chain speed high will increase the cutting speed and improve battery life.
Please tell me, many people in comments across internet told me one thing that is annoying with makita duc353. When you press power and u cut something, when you put it aside, after 5 seconds saw turns itself off, and you have to start it again constantly, if you are cutting something and moving cutted logs in same time. Can you start your chainsaw and put it aside to see, will it really turn itself off after 5 seconds. Why is this important for me ? - i am buying thiy chainsaw for my father. He is old and very very short tempered. If chainsaw will keep turning off after 5 seconds he will probably break it. I am very afraid he will break it cuz he has PTSD, he is war veteran. Thats why it matters to me so much
I’m not even a carpenter I’m a tin basher lol
You ever going to finish this job?😂😂
You have a One Plus mobile phone ??
Maybe all 50k could show up at your place and watch you change a Makita battery on your drill. Then they all go home. LOL. Congratulations on your subscription rate.
thanks man. next time tell gaston "hola hermano vamos por una birra" :D. you now officially take to the stadium more people than the blues. boom boom tisshhhh. hahahahaha. take care. pete
Haha that's a funny way to look at it
@@dressjess :D:D
17x 2
Been by your side for a long time and very pleased to be 1 of the 50k well done Scott keep the vids going!
curently 253k subs
Having only used a gasoline chain saw, the most interesting part of this one was the sound, yet you cut it off, Why? I wanted to see how quiet it is.
i bought one so i could "stealthy" cut wood at Sundays... Worked. The Neighbors did mention it, its around 90-103dB. The saw will not howl like a gas-driven machine. Dont buy the Husqvarna it has no good reviews. Makita rocks! Milwaukee too.
I have both the 18v one handed Makita chainsaw and this 36v model. Both very handy, although they both cut out quite easily. Congrats on 50k subs!
Excuse me. In case of hard wood such as hickory. Which is best between a chain saw and a recipe saw?
@@suvijakengr3374 a chainsaw is always quicker.
@@ToolsAndStuffOFFICIAL Thanks 😊
How long do 6 amps last for thankyou
You should send me your jig plate for hitting 50k subs lol
How many roti should I eat in a day?
treat the cut ends bro. And leave the landscaping to landscapers ;)
5:20 bruh i thought my phone was ringing, love Oneplus🥵
I just watched this video for the first time. You published 11 months ago. You're now at nearly 150k! Good job, my man!
It’s a noisy little thing isn’t it for electric. I’ve got one
Well deserved subscribers, look forward to seeing you and Paerau at 150k. Keep up the good work and best wishes from North Wales 🏴🏴🏴
Tbh though construction screws are solid as fuk
Congrats on your oneplus phone ;)
Love the videos. I’m doing a carpentry apprenticeship with my grandad in Australia. Watching your videos helps me learn all the tricks to the trade that I can bring to work
Is the same guy from tools and stuff?