Belt Squeak😖 Nissan Murano/Quest 3.5L

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 38

  • @NickWeissMusic
    @NickWeissMusic 3 года назад +4

    Great job shooting all the important parts to get at. Those engines are packed in tight, I couldn't see the second tensioner in other videos that clearly. I'll be tackling the job soon, thanks for the info.

    • @jfGarage4k
      @jfGarage4k  3 года назад +1

      The other tensioner on this video show how to loosen the Power steering belt, I have diagram show on the video just loosen the lock bolt and next the tensioner bolt after, the belt should be loose now and ready to remove, this one a little difficult to remove cuz of the location may need to laydown the ground or work on the wheelwell area. Good luck champ

  • @jimbowman3741
    @jimbowman3741 2 года назад +2

    thanks for the info gotta be tackling this job real soon

    • @jfGarage4k
      @jfGarage4k  2 года назад

      You know what its not that bad, just take your time dont rush

  • @davidbovat5871
    @davidbovat5871 2 месяца назад

    start car with ac on, if the belt squeaks turn off ac right away, If squeak stops the ac belt is causing the problem. It worked for me.

  • @ifixeditmyself1926
    @ifixeditmyself1926 2 года назад +1

    Great video!

  • @boots7859
    @boots7859 Год назад +1

    I've had that problem for the last 2 years, even got a PS belt in the trunk....
    Going to be replacing it, along with main if it needs it shortly.
    Weird thing is, if I turn off the ac/fan as soon as it starts, the noise goes right away. 165k on an 06, so might as well replace both since I'm in there.

    • @Lord_Don
      @Lord_Don Год назад

      Me too. Did you fix it?

  • @damonstroh4638
    @damonstroh4638 3 года назад +1

    Good video! Helps me out.

  • @JulianAcosta-ow2db
    @JulianAcosta-ow2db 29 дней назад

    No tendrás el diafragma de cómo van las bandasde accesorios de una quess Nissan 1997

  • @khalidelmusrati5547
    @khalidelmusrati5547 3 года назад +2

    Tank you

  • @billmrf2304
    @billmrf2304 3 года назад +2

    Great video

  • @bibektamang2505
    @bibektamang2505 4 года назад +2

    Good info thanks

  • @jameswallace7351
    @jameswallace7351 3 года назад +3

    It's sad they make everything so hard to get to on the new cars you can't even see the belts from the top of the engine and you can't tell what has to come lose to change the belts because you can't see it

    • @jfGarage4k
      @jfGarage4k  3 года назад +1

      They make it difficult for us average joe to work on it lol

    • @boots7859
      @boots7859 Год назад

      Thats the downside of transverse mounted engines and the smaller vehicle sizes. Of course Nissan is one of the worst as far as design/mechanicability. Gotta pull the intake manifold to replace the left side plugs..... Never going to buy or suggest one again, no matter how nice the sheet metal looks on the outside.

  • @tiffanyhamilton5722
    @tiffanyhamilton5722 3 года назад +1

    Very good video

    • @jfGarage4k
      @jfGarage4k  3 года назад

      Thanks for the good vibe appreciate it, have a great day

  • @tonyl1483
    @tonyl1483 3 года назад +2

    Could’ve lubricated one belt, and see if the squeak was still there, if not you found your bad belt!

  • @highwithhailey8632
    @highwithhailey8632 3 года назад +1

    What tools are you using?

  • @ericcross9788
    @ericcross9788 3 года назад +1

    What size socket's did you use?

    • @jfGarage4k
      @jfGarage4k  3 года назад +1

      Hi, the socket to loosen the tensioner is a 14mm socket. Good luck on the repair
      its should be easy going job

  • @gladgerbrooks2627
    @gladgerbrooks2627 4 года назад

    How to change alternator pulley

  • @Igottaedit
    @Igottaedit 4 года назад +1

    What year

    • @jfGarage4k
      @jfGarage4k  4 года назад +2

      This covered all the years that have 3.5L engine on it.

    • @ericcross9788
      @ericcross9788 3 года назад

      @@jfGarage4k what size socket's did you use?

    • @adamjonkie5601
      @adamjonkie5601 3 года назад

      @@ericcross9788 14mm

  • @khalidelmusrati5547
    @khalidelmusrati5547 3 года назад +1

    Holl plesas change water pupm

  • @adrianolavarria
    @adrianolavarria 3 года назад +1

    My broke the tensioner bolt

  • @normandoesvlogs
    @normandoesvlogs 4 года назад +1

    Hii

    • @jfGarage4k
      @jfGarage4k  4 года назад +1

      Yes. Whats going on champ?

    • @normandoesvlogs
      @normandoesvlogs 4 года назад

      Jasmine & Father Garage I have a Honda Civic 01 Sedan EX. It started smoking from the engine in the morning and it was cold outside. I was on park. I added antifreeze/coolant and the next day, I saw smoke again.

    • @normandoesvlogs
      @normandoesvlogs 4 года назад

      Jasmine & Father Garage :(( I don’t know what’s going on. Everything looks fine

    • @jfGarage4k
      @jfGarage4k  4 года назад +1

      Pressurize the cooling system with a handheld pump from the radcap see if leaks.

    • @normandoesvlogs
      @normandoesvlogs 4 года назад

      @@jfGarage4k There is no leaks