Hyundai Ionic 5 Front and Rear Dash Cam Installation Guide | How to install Hyundai Ionic 5 Front

Поделиться
HTML-код
  • Опубликовано: 19 ноя 2024

Комментарии • 20

  • @siemnab7473
    @siemnab7473 Год назад +4

    Thanks to your video I did it in 2 hours. FitcamX front and rear.
    Was the first time in my life I installed a dashcam myself. Thanks again for the video. It works even for an 70 year old man. 🥴

  • @margmug
    @margmug Год назад +2

    You saved me! I couldn’t find any video on installing a rear dash cam on my EV6. Never done anything like this before but you made it pretty easy. Thank you so much for this video!!!

  • @hh0520
    @hh0520 Год назад +1

    if you can just hop on over to the US to do mine that would be AWESOME 😁😁😁😁😁
    thank you for this video!!!

  • @yiannis5
    @yiannis5 Год назад +2

    Thank you!!!! thanks to you I was able to do it myself and learn a lot.

  • @iainrobertson6614
    @iainrobertson6614 Год назад +1

    Thank you for creating this video. Successfully installed. It would have been tricky without your help/

    • @sp88tips
      @sp88tips  Год назад

      I knew I couldn't fit everyone's dashcam so I'm glad I could help in this way. Please subscribe to my channels I need the numbers

  • @noxowner99
    @noxowner99 10 месяцев назад

    Nice job. Is there any reason you did not insert the backup camera wire from the bottom of the doors? I have the Ultimate and the sunroof is on the way.

  • @JeffreyHandy
    @JeffreyHandy 2 месяца назад

    Does hardwiring drain through battery in parking mode?

  • @pk509
    @pk509 Год назад +1

    This was very helpful. Thank you for sharing it.

    • @sp88tips
      @sp88tips  Год назад +1

      I’m glad you found the video helpful, more videos to come soon!

  • @zanomiminoza4714
    @zanomiminoza4714 6 месяцев назад

    Quality install, good to see the attention placed on bits you can't see. I'm thinking of installing headrest monitors, any advice on where to take the 12v feed? I was planning to tap in behind the central cigarette socket.

  • @spidLL
    @spidLL Год назад +1

    Awesome video, I’m in Ireland so it works perfect :)
    However I don’t understand where did you connect the hardwire cable: it looks like you connected only the yellow one? That means parking mode won’t work?
    I connected the red one on the third from above, first column (“AMP”). Tester showed current while car was off.
    However the camera doesn’t power up. I might be missing something.
    (It works with the usb power adapter).

    • @sp88tips
      @sp88tips  Год назад +1

      I wouldn't expect the kit to work with out connecting 12v live feed aswell as the switched live and earth.

    • @spidLL
      @spidLL Год назад

      @@sp88tips yep, you’re right. I bought another adapter and connected to the live 12, now works like a charm (including parking mode).
      By the way, you video was amazing: I followed it thoroughly to pass the cables.

  • @Xmoo123
    @Xmoo123 Год назад

    Did you unplug the battery? Does it somehow not initiate the airbags? Also is there a reason you choose the driver side? Planning to install the read camera in couple of days. Got the EU version with the left hand drive. But thinking of running the wires on the right side. I have not enabled park mode yet and don’t think I will.

    • @sp88tips
      @sp88tips  Год назад +2

      I didn't disconnect the battery. If the airbag went off, that would be a disaster. Anything built has to be foolproof. Airbags can't deploy willinilly. The right side is the same as the fuse box, but it doesn't matter; the left or right is mainly decided for the hardwire kit where the fuse box is located.

    • @Xmoo123
      @Xmoo123 Год назад

      @@sp88tips Thank you. Already installed mine. Pretty easy. Thank you.

  • @AussieBoyInDenver
    @AussieBoyInDenver Год назад +1

    plastic fish tape would have helped I think going front to back

    • @sp88tips
      @sp88tips  Год назад

      Thanks man, il buy some in the morning