Flipping 3rd Gen 4Runner P5 -Garage Painting Bumpers

Поделиться
HTML-код
  • Опубликовано: 12 сен 2024
  • Useful suggestions to make your 3rd Gen sell fast, or for your own upgrades! Keep it- they are great vehicles!

Комментарии • 41

  • @huntersmith8724
    @huntersmith8724 4 месяца назад

    mine's in need of this so thanks for the vid. It's a 2-tone white and silver but it looks like at some point the original silver was resprayed (not well) with a different silver, maybe millenium, but I'd like to respray it so the entire 4runner is white

  • @brucewayne2773
    @brucewayne2773 3 года назад +1

    Great improvement . I just repainted my front and rear bumpers on my 02 limited 4Runner, pearl white Tricoat. Had paint custom color matched and sprayed it with my spray gun. Took everything off and stripped it down to individual pieces, sanded , primered and wet sand all pieces prior to painting. 3 stage paint job was not easy.

  • @scubbarookie
    @scubbarookie 4 года назад +3

    Great clip! Thanks for the workmanship and fun approach! 👍

  • @zackeryeckenrod6549
    @zackeryeckenrod6549 4 года назад +2

    Just bought a 02 sr5 4wd from original owner
    126000 with main. records excellent condition everthing works lift and lockers near future. Always liked 4runner this is my 4th one won,t buy any other suv

  • @1420MHZ
    @1420MHZ Месяц назад

    I need to remove a dent from my front bumper and spray paint it this weekend; the color code from 2000 millennium silver was 1c0 - found a can on Amazon for $15.

  • @ExtremeRecluse
    @ExtremeRecluse Год назад

    I have a 2002 SR5 4Runner. it is banged up and rusted, being in Michigan.

  • @KM-yh4gh
    @KM-yh4gh 3 месяца назад

    Definitely much better

  • @JacobWithACamera
    @JacobWithACamera 4 года назад +1

    My bumpers are a little dented in from the previous owner, might have to take off the bumper, hammer out the dents, and give this a shot.

    • @JLeeChron
      @JLeeChron  4 года назад +1

      yeah that will work, heat it up a bit with a plumbers torch

  • @daniellehudson2017
    @daniellehudson2017 4 года назад +2

    what size tires do you have

  • @Circlec135
    @Circlec135 4 года назад +1

    Love the channel!!
    Did you go through a can per X2 coats you sprayed on?
    Wanted to paint my 01 front bumper, grille and rear bumper.
    Trying to figure how many cans to purchase 🤔

    • @JLeeChron
      @JLeeChron  4 года назад +4

      Marcos Diaz this one ended up with 1 can each.
      1 primer
      1 colormatch can
      And a partial clear.
      Appreciate the compliment

    • @Circlec135
      @Circlec135 4 года назад

      Thanks for the response!! Looking forward to more videos!!

  • @marcoaurelioamaralfernande8942

    Great!!!

  • @franciscomirandaiii4000
    @franciscomirandaiii4000 4 года назад

    Very informative video. I own an ‘02 4 Runner Limited 4X4 Silver. Just wondering, what is the paint code you’ve used for the bumper. Greetings from Skokie, IL. Thanks.

    • @zacwigs
      @zacwigs 4 года назад

      I have the same 4Runner. What paint are you going with? I need to do the bumpers and the side plastic trim.

    • @Fortyfreak85
      @Fortyfreak85 4 года назад +1

      @@zacwigs The paint code is 1C0-Millennium Silver. www.amazon.com/Dupli-Color-BTY1613-Millennium-Exact-Match-Automotive/dp/B00407RSCM

  • @drewwilliams4040
    @drewwilliams4040 Год назад

    How well did the paint hold up from rock chips/car washes?

    • @JLeeChron
      @JLeeChron  Год назад

      Very good
      6 mos after it was sold , beyond that dunno

  • @ilikepieinmypans2
    @ilikepieinmypans2 3 года назад +1

    What kind of wheels are installed on the 4runner? I aslo see you had aftermarket wheels on the limited (white with silver) 4runner you have, are those the same wheels?

    • @JLeeChron
      @JLeeChron  3 года назад

      Yes Those were KMC wheels 16x8 alloys
      Decent set

    • @ilikepieinmypans2
      @ilikepieinmypans2 3 года назад

      @@JLeeChron 16x8? I found what appears to be an identical looking KMC/Xd wheel but they only have it in 17x9 (satin black). I would think it would still fit though

    • @JLeeChron
      @JLeeChron  3 года назад

      @@ilikepieinmypans2 yeah 16’s
      May have discontinued

    • @ilikepieinmypans2
      @ilikepieinmypans2 3 года назад

      @@JLeeChron Actually found some 16s (KMC Enduro) 16x8 but have a different bolt pattern

    • @ilikepieinmypans2
      @ilikepieinmypans2 3 года назад

      @@JLeeChron Just found them. 16x8, same bolt pattern. Do you happen to remember what offset yours were? The two options are -12mm and 0mm

  • @tomtrantham6604
    @tomtrantham6604 4 года назад

    GJ JL

  • @Squinn0303
    @Squinn0303 3 года назад

    Is there a video of you putting the red and black stripes on? Thanks

    • @JLeeChron
      @JLeeChron  3 года назад +1

      Tiota nah:) Its just vinyl wrap, basic heat and apply

  • @Dreeebruuuuh
    @Dreeebruuuuh 3 года назад +1

    Get that paint can at Local hardware?

    • @JLeeChron
      @JLeeChron  3 года назад

      Advance, or Oreillys, Napa etc

    • @Dreeebruuuuh
      @Dreeebruuuuh 2 года назад

      @@JLeeChron how's the paint been holding up as of lately?

  • @cademiller7405
    @cademiller7405 4 года назад +1

    Do you actually plan on selling it ?

    • @JLeeChron
      @JLeeChron  4 года назад +1

      Cade Miller not likely anytime soon, just what I enjoy doing. Plan on running the miles up as high as possible on this one, getting 21mpg.
      Then again, if offered enough... 😆

  • @sethreisinger6723
    @sethreisinger6723 3 года назад

    Hey man can you let me know where to get the paint match color?

    • @JLeeChron
      @JLeeChron  3 года назад

      Duplicolor- Advance has it, oreillys etc
      Fairly popular

    • @sethreisinger6723
      @sethreisinger6723 3 года назад

      @@JLeeChron cool thanks. Great video

  • @spencervue3397
    @spencervue3397 4 года назад

    What steps did you use for sanding?

    • @JLeeChron
      @JLeeChron  4 года назад

      Spencer Vue Because it’s a painted bumper, I just used the rough up block on it. Doesn’t take much -Scuff it up so there is no visible sheen and sand smooth.

  • @miguel2592
    @miguel2592 4 года назад

    How did you paint the grill?