I love all of your trials and errors and happy accidents! This was NOT an epic failure because they turned out great!! I appreciate you and everything you teach us! Thank you Steve 😊!!!
I really love the way the white one came out. The roses came out okay. The plate, though, I don’t really love. Thanks for showing us the different effects.
I got my first Gallon of the JDiction 4hour resin. I just used it for the first time. I can't say how it goes since its curing but I will say this. I am incredibly impressed with the packaging and the info inside the box. Thanks for sharing about it.
Hi Steve… I absolutely love your teaching videos! I am ready to do my first pour, I have learned Soooo much watching you. Love from Northern Minnesota ❣️✌️
I really love these dishes. The foil - the scattered way in which it adheres - give a vintage look that is really beautiful. I’m buying some resin Crete through your / my Amazon account. I’m springing for us a cuppa! Thx Steve for all you teach us!! AND I absolutely love being a member!!
Thank you for introducing this to me. I purchased it (using your discount code) and absolutely love it! Made a couple of dishes with temporary tattoos. Stunning!
Steve I love it to learn with you it is fun to see that you are so cool with mistakes but teaching the best way to do crafts. Oh thanx to your video of shakers you made I am almost done with my huge shaker lamp. Thanks lots for your help. Ronnie 🤗😁
😂thank you so much for this video... I have just started trying the "eco resin" stuff and have 2 little trays I was trying to decide how I wanted to finish them off and had thought of doing things like you have done...lol kinda dreading going back through videos for bits of info I wasn't sure if I remember correctly and I pulled this video up and you have answered all my questions ❤❤❤. Bless you 🥰 you have made my day ❤❤..... and I wanted to add that I think yours came out beautifully ❤
Hmmm, what interesting results! I wonder what kind of effect you'd get breaking up the foil into the liquid and pouring it.. it might look very fancy if you use a foil that's the same colour family as the resincrete, i.e. if you colour the resincrete a red colour and use a red foil. I also think the low viscosity would lead to some interesting falling effects - what happens when you sprinkle glitter over the top, or use something heavier like beads poured over the top after the resincrete is in the mould?
You’re great! I’ve only just started trying to figure out things with resin and have made some cute things that I’m quite proud of since I am a beginner, but your videos are very informative. Youve taught me a lot and I just found your channel today. Thank you so much!!
Absolute in love with this material so far. I had to order a few more bags because my first one is running low! I'll have to try the Polycrylic sealer on it. I'd been using Black Diamon Wet Look, but it looks oddly streaky.
You got a really interesting effect with the foil. It's pretty cool looking! I really love the tiger and that paint that you used! It really came out beautifully.
Those dishes came out so nicely Steve. I think that resincrete looks like a really good product.Thanks for doing all these experiments, they're really appreciated. God bless you and all those you love Steve
Hi steve I have been trying to find more info on resincreet. It is hard to find. I am making a wedding cake topper for my son's wedding and trying to find the right color to mix with it. The color come out so light
I think mica powder brushed on or flicked on like a sprinkled glitter look in specific areas you would like to highlight or in a pattern?????? Whatever you’d like would probably look better if it transfers well. I don’t know cause I don’t do resin I just love watching you do it lol
Hi Steve, Loved all 3 👍 but my personal favourite was the tiger & butterfly the white background just made it pop Steve, please can you tell me are they as fragile as porcelain & if u dropped one would it smash thanks 👍❤️
Love your videos have learned alot im not sure if I saw it on your channel or another but what happens if it's still liquid after the 20mins? I did measure with scale. And did it at 11pm and woke up still a liquid mess. Not sure where I've messed up...
curious, you may have already tried, could you pour resincrete down the sides of the mould, once it has set, add the metal leaf, cover the metal leaf with resin, then put a final coat of resincrete over it - I do like the abstract of how your pieces came out only using resincrete, just wondered about using it and regular resin in the same project?
Whenever I watch your videos I always have to remind myself to change the method a bit because you don't have 40°C (104°F) temperatures where you are. No wonder my bubbles rise to the surface more easily.
Very odd result with the leafing.😢 I wonder if you could dust the mold with mica powder. Otherwise you will just have to go with dying the create stuff. NOW your thinking 🤔 tattoos worked very well. I love the tiger plate. Not so sure about the others.😆 😆 😆
Are all nice. But I love tigers so I like the tiger one the best. I would actually make that and use that just like it is. It is perfect as far as I'm concerned
Am I missing the link to that cutting tool? I'm not seeing it. Could be overlooking. Also.. what's that "sinker" you use. I had no idea about it and my whole life is about to change lol ❤ thanks
I love all of your trials and errors and happy accidents! This was NOT an epic failure because they turned out great!! I appreciate you and everything you teach us! Thank you Steve 😊!!!
I love the look of the foil behind the flowers. Very interesting! Keep your experiments coming! (It saves US a lot of time and resin 😂)
I really love the way the white one came out.
The roses came out okay.
The plate, though, I don’t really love.
Thanks for showing us the different effects.
I got my first Gallon of the JDiction 4hour resin. I just used it for the first time. I can't say how it goes since its curing but I will say this. I am incredibly impressed with the packaging and the info inside the box. Thanks for sharing about it.
Hi Steve… I absolutely love your teaching videos! I am ready to do my first pour, I have learned Soooo much watching you. Love from Northern Minnesota ❣️✌️
I need that tiger tattoo!! Love that one so much ❤
Love the tiger & butterfly, The other two remind me of the old Melmac bowls that my great grandma used. 🥰
I am in love with the key holder plate. So pretty
I really like the tiger dish, very pretty.
Love the look of the resincrete, definitely on my list of things to try
I really love these dishes. The foil - the scattered way in which it adheres - give a vintage look that is really beautiful. I’m buying some resin Crete through your / my Amazon account.
I’m springing for us a cuppa! Thx Steve for all you teach us!! AND I absolutely love being a member!!
love how the tray and plates turned out. absolutely love the tiger plate.
Are they really solid when dry and do they stick together if you want to do layers?🤔
Thank you for introducing this to me. I purchased it (using your discount code) and absolutely love it! Made a couple of dishes with temporary tattoos. Stunning!
I love that tiger dish 😍 were did you buy those tattoos?
Steve I love it to learn with you it is fun to see that you are so cool with mistakes but teaching the best way to do crafts. Oh thanx to your video of shakers you made I am almost done with my huge shaker lamp. Thanks lots for your help. Ronnie 🤗😁
Haha! You completely anticipated my questions about this stuff- foil sheets and temporary tattoos. Thank you! 🎉
Love the key dish!! Very striking!!
😂thank you so much for this video... I have just started trying the "eco resin" stuff and have 2 little trays I was trying to decide how I wanted to finish them off and had thought of doing things like you have done...lol kinda dreading going back through videos for bits of info I wasn't sure if I remember correctly and I pulled this video up and you have answered all my questions ❤❤❤. Bless you 🥰 you have made my day ❤❤..... and I wanted to add that I think yours came out beautifully ❤
You inspire me!! I also want to thank you for the great ideas and some discounts!!! Love ya
Hmmm, what interesting results! I wonder what kind of effect you'd get breaking up the foil into the liquid and pouring it.. it might look very fancy if you use a foil that's the same colour family as the resincrete, i.e. if you colour the resincrete a red colour and use a red foil. I also think the low viscosity would lead to some interesting falling effects - what happens when you sprinkle glitter over the top, or use something heavier like beads poured over the top after the resincrete is in the mould?
loved this video, it answered a few things i wanted to know .thank you .🙋♀
Very nice - foils gives it the extra pop
You’re great! I’ve only just started trying to figure out things with resin and have made some cute things that I’m quite proud of since I am a beginner, but your videos are very informative. Youve taught me a lot and I just found your channel today. Thank you so much!!
Hi Steve, I bought the resincrete but haven’t used it yet. I’m thinking a spray sealer to avoid brush strokes. Thoughts?
🎉Very cool 😎 experiments 😊
Absolute in love with this material so far. I had to order a few more bags because my first one is running low! I'll have to try the Polycrylic sealer on it. I'd been using Black Diamon Wet Look, but it looks oddly streaky.
Another Steve original!!! ❤
I think it looks cool
I wonder why the gold/metallic leaf sticks to resin better than the resincrete
These look beautiful! I'm curious, how durable is Resincrete? Will it crack easily?
I love how these turned out 💜💜💜. I love the tiger the best.
Did you do a night light using a sphere mould? If so was it a special resin you used?
Does this product require the same temperature and low humidity that epoxy resin does?
Awesome Video steve McDonald
You got a really interesting effect with the foil. It's pretty cool looking! I really love the tiger and that paint that you used! It really came out beautifully.
Don't know if this is my cup of tea... Right now I'm not a big fan of it.
Stay safe, you do you, and stay crafty 👍👍🛎️🛎️🦋🦋
Those dishes came out so nicely Steve. I think that resincrete looks like a really good product.Thanks for doing all these experiments, they're really appreciated. God bless you and all those you love Steve
Going to try this looks great fun how much do you sell them for 😊
Excellent video. Always excited to see you craft and experiment. Love your work!!!!
The tiger is my favorite!
Will mold release work with Resin-Crete?
Hi steve I have been trying to find more info on resincreet. It is hard to find. I am making a wedding cake topper for my son's wedding and trying to find the right color to mix with it. The color come out so light
Is it white or clear. Did you color it?
omg thank you thank you for that coupon code!! I've been itchin to try this resincrete out! Just ordered it and can't wait to experiment!
I think mica powder brushed on or flicked on like a sprinkled glitter look in specific areas you would like to highlight or in a pattern?????? Whatever you’d like would probably look better if it transfers well. I don’t know cause I don’t do resin I just love watching you do it lol
These are cool 😎😎 the tiger is my fav
Hi Steve, Loved all 3 👍 but my personal favourite was the tiger & butterfly the white background just made it pop Steve, please can you tell me are they as fragile as porcelain & if u dropped one would it smash thanks 👍❤️
Thank you, Dr. Mc.
Love your videos have learned alot im not sure if I saw it on your channel or another but what happens if it's still liquid after the 20mins? I did measure with scale. And did it at 11pm and woke up still a liquid mess. Not sure where I've messed up...
curious, you may have already tried, could you pour resincrete down the sides of the mould, once it has set, add the metal leaf, cover the metal leaf with resin, then put a final coat of resincrete over it - I do like the abstract of how your pieces came out only using resincrete, just wondered about using it and regular resin in the same project?
I like the antique look to the two pieces where the metal leaf didn't stick as well as you had hoped
Whenever I watch your videos I always have to remind myself to change the method a bit because you don't have 40°C (104°F) temperatures where you are. No wonder my bubbles rise to the surface more easily.
Very odd result with the leafing.😢 I wonder if you could dust the mold with mica powder. Otherwise you will just have to go with dying the create stuff. NOW your thinking 🤔 tattoos worked very well. I love the tiger plate. Not so sure about the others.😆 😆 😆
If you want something like this in the uk use Aqua cast from elichem it’s reasonable and very good.
Are all nice. But I love tigers so I like the tiger one the best. I would actually make that and use that just like it is. It is perfect as far as I'm concerned
After watching this video, I was wondering how this product would work in a holographic mold. I'm thinking it won't work, but what are your thoughts?
Could you please entering the discount links for Canada again?
Hello Steve!! I really like your videos and would like to buy some resincrete but your discount code wouldn’t work 😢. How do I use your code?
Am I missing the link to that cutting tool? I'm not seeing it. Could be overlooking. Also.. what's that "sinker" you use. I had no idea about it and my whole life is about to change lol ❤ thanks
@@SteveMcDonaldArtsandCrafts thanks very much!
Steve you should put a store link in for Australia
If you make, it's art...if I make it, it's a terrible mess!! 🤣
I prefer just the tattoos to the shiny foil
I can’t find the Resincrete listing. Anyone help me?
Food safe?
How is resincrete different from concrete
❤❤❤
I would like to pay a monthly subscription to join your channel do you only take payment through RUclips ? , or is there other ways ?
I did a Steve move lol I forgot to take the wrap off a couple of my tattoos
How many people love these vids, save them for later but don’t actually make them! ……c’mon be honest!!!
Hmmmm am I getting old or did you also loaded this video up a few days ago.
Not a fan at all. To me they just look messy