1. Nice position for rear LED strips, with all the mud flying from the rear wheel, love it when it rains! 2. Also the stickers on the strips may not hold well, applying more tape helps. 3. I used LEDs when riding at nights, those are not visible in day light. 4. Washing the bike with all that wiring and stickers coming loose is fun!
100% Accurate though, because I completed my own installation without removing fairings lol. Just avoid the engine, strap down to the wires and frame of the bike. Stick the LED strips to the actual Fairings itself. So for mine it would be Ninja 400 KRT Lime green, stick it on that part to ensure stability. Note: I placed my front LED's under the lip of the front headlight facing upward. Some slight visibility in front but stills pulls off a great look and no wire damage so far. It's been about a week since the installation.
Here is a GOOD TIP. whenever your mounting LED"s to you motorcycle, or even a pocket bike.. Remember there will be times when you have to remove a fairing (s) for maintenance. So LAY VELCRO STRIPS under each. Led strip/pod so when you remove a fairing it will peel apart, and just hang in place..
I also happen to have a black ninja 300 and I spliced my control box into my tail light wire so it turns on when I turn the key. Another tip would be to undo those two bolts holding the tank cover down and below it you’ll have room to run wires through. Video was definitely helpful, much appreciated.
Dude... you are so funny. But seriously... thank you. I know the video was done a few years ago but I'm still going with this on my 2020 Ninja. Thanks again
Fabrice. I know im not the first and i am kicking myself for not watching it before i went into work. Thanks for all the great video man. Currently shopping for a 300 for my first bike. 👍👍
I'd like to ask one question that maybe no one else thought. Does your led kit keep its settings (color you have chosen for example) when you click the switch off? Because i heard some units after taking them off the battery, they lose the settings and start over as it was never used when plugged again to the battery (like what you actually do when switching on again)
When I had purchased led strips and installed, the lights would have go back to green after I turn the bike on and off.’it would never stay one colour. Do you know why?
I bet after 4 years of freezing cold that Chinesium Adhesive has failed. The Japs knew how to make adhesives that would NEVER fail ...... even on 40 year old bike decals getting em off is incredibly difficult.
How to repair motorcycle RGB controller broken circuit.. my installation gone wrong i forget to put on AC 12 v on motorcycle could you please suggest me some videos
Help !!!!!!!!!! Hey man so I have a question I need your help So I was riding home one day and I ran out of gas I turn my Petcock switch to reserve then I went to the gas station I didn’t turn the Petcock switch back to the on position The bike is working fine it’s seem to be at least I get back on the freeway and it works fine but ever since then if I try to hold high speed for long periods of time the fight starts to bog and will eventually cut off If I don’t let off if anyone knows anything please let me know it would be a huge help I have a Suzuki katana 2006 750
Pawns- HELP. I installed LED strip lights on the plastics of my Ninja, and now need to remove them. They are on with the thin scotch tape style double sided tape. Thanks.
You have won, reply to PwnsJones private message by check your private messages click your account icon in the top right > Creator Studio. In the left menu under "Community," click Messages.
Wrote Fabrice, couldn’t say it in comments. Read it! Was going to buy if cheaper, and less poor. I want GIBS, we vote now! - Murdoch Murdoch! Did you ask her permission before putting wire in said leftist? Come put it on my old bike, I’m an entitled person, nah! Gimme, or I’ll insult you! I’m a self hater too! Cool look at night, even more n my old GTR 1000, bet. Another Kawasaki!
1. Nice position for rear LED strips, with all the mud flying from the rear wheel, love it when it rains!
2. Also the stickers on the strips may not hold well, applying more tape helps.
3. I used LEDs when riding at nights, those are not visible in day light.
4. Washing the bike with all that wiring and stickers coming loose is fun!
Mine holds up real well,I added a little locktite on the back of my strips
20% of this video is tutorial. 80% is faffing around. This is gold
100% Accurate though, because I completed my own installation without removing fairings lol. Just avoid the engine, strap down to the wires and frame of the bike. Stick the LED strips to the actual Fairings itself. So for mine it would be Ninja 400 KRT Lime green, stick it on that part to ensure stability. Note: I placed my front LED's under the lip of the front headlight facing upward. Some slight visibility in front but stills pulls off a great look and no wire damage so far. It's been about a week since the installation.
Here is a GOOD TIP. whenever your mounting LED"s to you motorcycle, or even a pocket bike.. Remember there will be times when you have to remove a fairing (s) for maintenance. So LAY VELCRO STRIPS under each. Led strip/pod so when you remove a fairing it will peel apart, and just hang in place..
I also happen to have a black ninja 300 and I spliced my control box into my tail light wire so it turns on when I turn the key. Another tip would be to undo those two bolts holding the tank cover down and below it you’ll have room to run wires through. Video was definitely helpful, much appreciated.
This guy is really.... odd
He kinda reminds me of Jim Carrey.
I cant even ...
You’re odd
iDubz if he was a motorcycle enthusiast
Dude... you are so funny. But seriously... thank you. I know the video was done a few years ago but I'm still going with this on my 2020 Ninja. Thanks again
Now you don’t need a Christmas tree anymore 😂😂😂
You r the Deadpool of motorcycles... Love the video
We cheating on what? Bro got ADHD harder than I do 🤣
I’m gonna pimp my future bike some day just like this with LED lights and it’s gonna be green and white theme like the goblin from Spider-Man. 🤟🏻
Fuck off young punk
@@valoriedixon4782 shut the fuck up Valorie
Fabrice. I know im not the first and i am kicking myself for not watching it before i went into work. Thanks for all the great video man. Currently shopping for a 300 for my first bike. 👍👍
Pwns its time for an upgrade. Ninja 650 is callin you man!! 😁
This dude is mad funny. I love this video bro
Not gonna lie. I used to be iffy about your channel but this was absolutely hilarious.
Bro you had me laughing the whole time 😂😂😂👌
You got the whole squad laughin 😑
ha ha
Just Subscribed Jones! Awesome vids and I know you have a low view count but supporting my fellow Ontarian and Canadian! Ride on!
F*ck Canada ..... but NOT her People. We love our canuck friends, just not Trudope
Not even a min into the video and I instantly subscribed lmao
How did you connect the brake light acc? So when you push the brake it will turn the red light! I didn’t see you connect that wire
What type of switch is that to turn the radio receiver off and on?
SPST = Single Pole Single Throw 15Amp voltage does not matter too much. DC Rated switches are ideal but not necessary
The Jim Carey of BIKES & LEDs
I'd like to ask one question that maybe no one else thought. Does your led kit keep its settings (color you have chosen for example) when you click the switch off? Because i heard some units after taking them off the battery, they lose the settings and start over as it was never used when plugged again to the battery (like what you actually do when switching on again)
I bought the one with USB connector. I just plug it into my bikes phone charger and works great.
Where did u buy it? And whats the exact search name pls? Would love to install it and with USB i guess is much easier 😅
How do I connect the button and what do I connect it to.
😂 Regular Car Reviews would give this a 👍🏾
are you located in GTA toronto? or know any connections to reach out to?
I’m not gone lie, when I seen 16:00 I was kind of iffy but I’m glad I stayed 🤣🤣 you got a subscriber
This was entertaining. Make more videos about motorcycles 🏍 for me please. Just bought a 650 ninja
Funny asf and helpful thank u so much 😂👌🏻🔥
When I had purchased led strips and installed, the lights would have go back to green after I turn the bike on and off.’it would never stay one colour. Do you know why?
Like your style my man, nice one.
Hey man. I would like to ask. Can i use a normal led strip?
When u start to speed it will fall off
Yes you can if its 12v.
I bet after 4 years of freezing cold that Chinesium Adhesive has failed. The Japs knew how to make adhesives that would NEVER fail ...... even on 40 year old bike decals getting em off is incredibly difficult.
So u just stick it all on one side of faring??
How to repair motorcycle RGB controller broken circuit.. my installation gone wrong i forget to put on AC 12 v on motorcycle could you please suggest me some videos
Just get a new one from amazon, the whole set similar to this is under £15
Fuck off punk
Fuck off young punk
Fabrice! Subscribed !! I have the same bike
What’s your white wire coming from switch?
It's an antennae.
Help !!!!!!!!!!
Hey man so I have a question I need your help
So I was riding home one day and I ran out of gas I turn my Petcock switch to reserve then I went to the gas station I didn’t turn the Petcock switch back to the on position The bike is working fine it’s seem to be at least I get back on the freeway and it works fine but ever since then if I try to hold high speed for long periods of time the fight starts to bog and will eventually cut off If I don’t let off if anyone knows anything please let me know it would be a huge help
I have a Suzuki katana 2006 750
You got me into motorcycle pwns
Great video. Thanks
I like this guy😂😂😂
hi buddy ..do you need to install the regulator for this wiring too.....?
Is this legal in Illinois? I can only find things online that talk about it being illegal for cars but nothing about motorcycles.
Is there a way to wire this so that the LED system turns on/off with ignition instead of using a switch?
Yeah, you'd find the ignition wire in the bikes electrics and wire the live wire for the LED strips into that
6:30 "...and then you run your *swallows mic* LED WIIireZZZ..."
What is the switch called to switch off
Whats the song called at 15:45
Knas ur mom gae the II.
Great video. Are those stock mirrors or no?
I enjoyed your video you ate hilarious lol
He ate hilarious 😭😓😱😱 cannibal 🤣
very informative....and entertaining ha
Febreeeeeeze
are these led waterproof?
Maybe it’s not good for daytime. Maybe cuz it’s made for when it’s dark duh
“We’re gonna cheat on our women, and we’re gonna cheat on our bikes”
Pawns- HELP. I installed LED strip lights on the plastics of my Ninja, and now need to remove them. They are on with the thin scotch tape style double sided tape. Thanks.
I laughed more than I learned how to actually do it
I wish you had shown how to connect it to your battery, I cant figure it out.
Nice video
Whats the type of bike ?
😂😂😂😂😂 nice video!
Think you need some LED lighting in your garage
FABRICE!!!!!
Chripes ......get on with it!!
Are the blue LEDs legal?
I’ve heard blue isn’t because of reference to cops.
Depends on the country, its allowed in norway as long as its parked
You are very funny😄😄😄😂
hilarious and insightful
He is funny ill sub.
Looks pretty kool man 👍🏻👍🏻👍🏻
Who els is in 2022
FABRICEEE
dude not maybe these things for night's that's the reason hole point put em on
Lol, you talk like Deadpool
Febreze
Lol funny video but useful
Man you are sooo funny, LOL!!
Couldn’t watch till the end, talks a lot!!
I’m unliking snowy
FaBrice!
This guy is awesome. Totally subscribing FABRICEEE!!
Entertaining
What about your battery
Leds do not drain alot of energy you will not have any issue unless you let them suckers on for the whole night and don’t run the engine :p
is this illegal?
faBRICE
COULDA RECORD IT AT NIGHT YOU KNOW
This is legal right ?
Oh yeah yeah
This was actually unhelpful
Taut..... not taunt
faBRICE!!!!
ledimsk gg
You have won, reply to PwnsJones private message by check your private messages click your account icon in the top right > Creator Studio. In the left menu under "Community," click Messages.
Fuck you beat me to it just got outta work :(
good video
*how to rice the bike
Or, how to stop people from changing planes into you at night every fucking night because they can't see your black motorcycle in the dark.
i just wanted to see how to hook it up. im fucking cringing.
Fabriiiii
lmfao this is hilarious
I only made it a few minutes in before I just quit. I couldnt stand the awkward "jokes?" anymore.
Decorated bike😂😂😂😂
Crappy kit. A good kit has multiple lengths of wires
This guys fkn wierd
Wrote Fabrice, couldn’t say it in comments. Read it! Was going to buy if cheaper, and less poor.
I want GIBS, we vote now! - Murdoch Murdoch! Did you ask her permission before putting wire in said leftist? Come put it on my old bike, I’m an entitled person, nah! Gimme, or I’ll insult you! I’m a self hater too! Cool look at night, even more n my old GTR 1000, bet. Another Kawasaki!
For brees
i have a naked bike...
Ugly rear install you need to make it hidden