Your Manticore X is the best 10/22 lower, and the Fletcher open top 11/22 arguably the best upper receiver. Could you work with them on a complete rifle? One that is maybe not 100% compatible with other receivers, but optimized and better looking than a franken built? Plus, you could add a slight magwell into it. Not something that goes far down and that makes it hard to insert, just some sligh lips so you hit reloads every time. And a thin and light handguard at the front. Something like the Wiland chassis has. Thin carbon fiber TOOB for better grip than just a Mlok rail.
I will buy this when they start including an appropriate spring with it as the stock spring is obviously not strong enough for this trigger without bending it just right.
My P22 CA is working perfectly "normal". I want to upgrade the trigger but ... seems like the Tandemcross trigger is not working as expected. Hope they fixed the issues. 🎉
I tried to change the trigger. But I loose this f***** spring for magazine release (under the black plastic piece). I don't know how is possible to place it... 😢 I don't find any plan or video 😢😢
Problem fixed 😅 I have to disassembly the trigger and then push the plastic part and insert the spring. Nice upgrade with this trigger, very qualitative.
@@adzsness emailed tandemkross, apparently the spring behind the trigger had to be bent out more. It was loosing tension. It took a couple tries to get it right but just be patient
Thanks for the comment. They offer a threaded barrel adapter so that you can have muzzle devices, and a lot of the models have the smaller thread for that adapter. Additionally, is there a reason we should not have a muzzle device when discussing a trigger?
Tandemkross you know you got a buyer for life in me! Keep pushing on
Thank you! haha
Hi TK! Thanks for making good guns great!
Our pleasure!
Your Manticore X is the best 10/22 lower, and the Fletcher open top 11/22 arguably the best upper receiver.
Could you work with them on a complete rifle? One that is maybe not 100% compatible with other receivers, but optimized and better looking than a franken built?
Plus, you could add a slight magwell into it. Not something that goes far down and that makes it hard to insert, just some sligh lips so you hit reloads every time.
And a thin and light handguard at the front. Something like the Wiland chassis has. Thin carbon fiber TOOB for better grip than just a Mlok rail.
Thank you fairly simple. Very well done video
Glad you liked it!
I will buy this when they start including an appropriate spring with it as the stock spring is obviously not strong enough for this trigger without bending it just right.
Great tutorial! thanks!
MM77 Approved 👍🏻👍🏻
legend!
My P22 CA is working perfectly "normal". I want to upgrade the trigger but ... seems like the Tandemcross trigger is not working as expected. Hope they fixed the issues. 🎉
Hi! Have you reached out to tech support? We will figure out whats going on and get you up and running!
I tried to change the trigger. But I loose this f***** spring for magazine release (under the black plastic piece). I don't know how is possible to place it... 😢 I don't find any plan or video 😢😢
Problem fixed 😅 I have to disassembly the trigger and then push the plastic part and insert the spring. Nice upgrade with this trigger, very qualitative.
Anyone get this new Victory trigger for Walther P22 ? Curious to know was it easy to install and your thoughts on this upgrade ?
Me 2
Did the assembly but lost double action
so did i ? would like to know why, sometimes has it most of the time not
@@adzsness emailed tandemkross, apparently the spring behind the trigger had to be bent out more. It was loosing tension. It took a couple tries to get it right but just be patient
@@unknown6192 I'm running into this issue as well. Could you share a bit more detail? Waiting to hear back from their technical support.
@@fortunado21 I found it to be the spring behind the trigger, I had to bend it out a bit
@@unknown6192that's a bit discouraging. They should really send a spring with proper geometry if the stock spring doesn't just drop in.
Will this fit a p22CA?
It should, yes!
Just when I bought a pistol without tons of upgrades available TK ruins it. Sigh SHUT UP AND TAKE MY MONEY!!
hahahaha!
Why use a silencer to review a 22 trigger for a gun without a threaded barrel? Inneffective.😮
Thanks for the comment. They offer a threaded barrel adapter so that you can have muzzle devices, and a lot of the models have the smaller thread for that adapter. Additionally, is there a reason we should not have a muzzle device when discussing a trigger?