Comprehensive video instructions....thanks. . UPDATE: Installed the new firing pin w/spring and ejector. Spent a day at the range and the difference was day vs night. P22 ran flawlessly. Much better than with the OME extractor, firing pin and spring! Thanks !!!!!!!
Just got back from range with these upgrades installed plus the captured recoil spring. I ran about 380 rounds through it with federal 40g and still had some issue of failing to eject, misfiring and failure to cycle next round. However I definitely noticed an improvement. Prior to these upgrades I had one or more malfunctions on every mag. Now I was able to go through full 10 round mags (California) with no issues.
I just got P22 yesterday so found out pretty quickly that I was going to have to do some fine tuning on it. The very first clearing when the slide was pulled back to eject a live round, the round wouldn't come out. It was loose in the chamber so that wasn't the problem. After carefully taking the live round out with a probe, I loaded a full magazine then tried clearing the gun again. The round stayed in the chamber like the first one. Apparently the extractor wasn't doing its job. I ordered the firing pin and extractor upgrade which brought me here. I'll do the disassembly then polish any wear partners then reassemble with my new TK upgrades. There's so much I really like about the P22-Q that I don't mind monkeying with it to make it more trouble free and dependable. I did the same thing with my Ruger 10/22 and was glad I did. Time will tell.
@@TANDEMKROSS I will. Currently it malfunctions virtually every magazine ( misfire, failure to eject and failure to cycle) on federal ammo. A friend gave me 100 rounds of cci stinger and had absolutely zero issues with that ammo. But I have a lot of non cci ammo so hope these upgrades help.
Nice upgrades. Not so easy to install, but thank goodness you made this great video. I'm looking forward to trying out my P22Q... and hopefully with less disfuntions 😅
Now that I have the parts and I am cleaning my piece before I reassemble it (hasnt been cleaned it 10yrs but hardly used also) i am comparing these part to the OEM and I do not visually see a difference at all...Hopefully when its all back together I'll run it hard and see what happens
I'm going to buy some of your upgrades to improve my WALTHER P22 it's good but there's reason not to make it outstanding in performance ! Now my only question is will we see an improved or enhanced slide release lever to improve its function where the thumb slippage off the lever is improved or reduced it's just a thought to be looked into? 🤔
Hello! I upgraded the extractor and slide spring. Did some minor filing on the extractor guide. All this seemed to help dramatically with the constant jamming and extracting issues. However, one thing I did notice when testing it was the fact that a jammed shell had a slight bulge making it get stuck in the chamber after it fired. Had to pry it out with a screw driver. Now, is this due to the way the pin is hitting the cartridge or is it a flawed cartridge? This was happing with Remington Golden and Aguila Super extra. I don't recall if it did it with CCI Mini Mags. I will be changing out the firing pin. Do you think this will help with cartridge blow out. Any advice is welcomed.
I did all this today and now for some reason the casings are getting stuck, failure to feed is occurring every other shot, and it doesn’t fire always anymore. What could I have done that may have caused this?
We are sorry you're having this issue! Can you submit a customer service request on our website? We will have our tech department get you up and running.
Love the breakdown and upgrades for the P22 it’s the best looking 22 hand gun on the market imo
Comprehensive video instructions....thanks. . UPDATE: Installed the new firing pin w/spring and ejector. Spent a day at the range and the difference was day vs night. P22 ran flawlessly. Much better than with the OME extractor, firing pin and spring! Thanks !!!!!!!
Just got back from range with these upgrades installed plus the captured recoil spring. I ran about 380 rounds through it with federal 40g and still had some issue of failing to eject, misfiring and failure to cycle next round. However I definitely noticed an improvement. Prior to these upgrades I had one or more malfunctions on every mag. Now I was able to go through full 10 round mags (California) with no issues.
I've bought plenty of Ruger parts from Tandemkross, but never knew they had Walther parts for my P22!
we sure do!
I just got P22 yesterday so found out pretty quickly that I was going to have to do some fine tuning on it. The very first clearing when the slide was pulled back to eject a live round, the round wouldn't come out. It was loose in the chamber so that wasn't the problem. After carefully taking the live round out with a probe, I loaded a full magazine then tried clearing the gun again. The round stayed in the chamber like the first one. Apparently the extractor wasn't doing its job.
I ordered the firing pin and extractor upgrade which brought me here. I'll do the disassembly then polish any wear partners then reassemble with my new TK upgrades.
There's so much I really like about the P22-Q that I don't mind monkeying with it to make it more trouble free and dependable. I did the same thing with my Ruger 10/22 and was glad I did. Time will tell.
Please let us know if installing our extractor fixed this!
We definitely want to make sure you can hit the range knowing it will go bang!
Let us know if it made a difference!
@@kyleRS87 I'll let you know. I plan on running 500+ rounds through it this weekend.
@@randmayfield5695 🧐
Any updates on this?
Just Installed these today. Can’t wait to get to the range and see the difference
let us know!
@@TANDEMKROSS I will. Currently it malfunctions virtually every magazine ( misfire, failure to eject and failure to cycle) on federal ammo. A friend gave me 100 rounds of cci stinger and had absolutely zero issues with that ammo. But I have a lot of non cci ammo so hope these upgrades help.
Great video. I have a P22 that constantly jams. I bought the parts and am now ready for the install.
Let us know how it works out . My two guns are jamopmatics
Thanks for this video. Very informative! 👍
Glad it was helpful!
My guns need more tandem kross in their lives!
Nice upgrades. Not so easy to install, but thank goodness you made this great video. I'm looking forward to trying out my P22Q... and hopefully with less disfuntions 😅
Will this upgrade makes the gun Ammo friendly?
MM77 Approved 👍🏻👍🏻
Legend!
Now that I have the parts and I am cleaning my piece before I reassemble it (hasnt been cleaned it 10yrs but hardly used also) i am comparing these part to the OEM and I do not visually see a difference at all...Hopefully when its all back together I'll run it hard and see what happens
Glad to be ordering soon along with mag exatenion
I'm going to buy some of your upgrades to improve my WALTHER P22 it's good but there's reason not to make it outstanding in performance ! Now my only question is will we see an improved or enhanced slide release lever to improve its function where the thumb slippage off the lever is improved or reduced it's just a thought to be looked into? 🤔
could be possible!
Will this upgrade work in my P22 that's somewhere close to 15 yrs old or so?
Yes, it should!
Will this solve light primer strikes in my PPQ22?
Assuming it's a faulty/mushroomed firing pin you have in there now, it definitely should!
Hello! I upgraded the extractor and slide spring. Did some minor filing on the extractor guide. All this seemed to help dramatically with the constant jamming and extracting issues. However, one thing I did notice when testing it was the fact that a jammed shell had a slight bulge making it get stuck in the chamber after it fired. Had to pry it out with a screw driver. Now, is this due to the way the pin is hitting the cartridge or is it a flawed cartridge? This was happing with Remington Golden and Aguila Super extra. I don't recall if it did it with CCI Mini Mags. I will be changing out the firing pin. Do you think this will help with cartridge blow out. Any advice is welcomed.
I did all this today and now for some reason the casings are getting stuck, failure to feed is occurring every other shot, and it doesn’t fire always anymore. What could I have done that may have caused this?
We are sorry you're having this issue! Can you submit a customer service request on our website? We will have our tech department get you up and running.
Not seated .
Do you have five inch barrel kits?
My firing pin did not come with a spring.
That pin by the safety lever that needs to be removed is not 1/8. It's 3/32
Haaaa I just found that out a few minutes ago😂😂😂 Literally a few mins ago
Negative