Repairing the air seal on a hot tub from Bestway Lay-Z-Spa
HTML-код
- Опубликовано: 27 авг 2024
- A quick video on how to repair the Lay Z Spa non return valve air seal used for the spa, bubbles pump that often leaks and causes the egg on a Bestway Lay-Z-Spa to leak water. This is the A valve connection.
You need the repair valve which you can order from:
amzn.to/3xXgtJA
(Lay Z Lazy Spa Non Return Valve - A connection)
This is an easy fix for the non return valve on these inflatable hot tub units.
All you need is a pair of thin nose pliers and maybe a screwdriver. Oh and patience! Хобби
Thank you Andy for your video. I have ordered part and hope to fix my leak shortly using your video
Paula
Great news, hope you get it sorted
I have the same issue, thanks for explaining so well.
Hi I have a lazy spa Maldives, the non return valve is positioned at the other end of the pipe in your video, so I can’t reach it with pliers, is there a way of replacing the valve?
Hmm, noticed the walls of my tub are full of water. Does this indicate some sort of leak? 😢
How is this possible to push the piece through the hole? This is impossible for me.
My pump had water coming out of the bottom during operation. Wasn’t sure what the issue is but I undid this pipe and water flows out fully. I’m assuming it’s because of this one way value. Easy spa instructions are utterly ridiculous and pointless. Whichever muppet put those together should be sacked immediately. Good video thanks for the tip. This is a design issue imo should be easier to change this piece. Never mind.
would this cause the air of the tub as well
i wonder if you can answer / help with my problem is the flap inside the tub itself is not sealing so when i turn the bubbles on water just gushes out because of the air .
I’ve recently just fixed this issue I used aquarium silicone leave it a couple days to dry and it was fine make sure you
Use plenty tho
@@Tezza187 thank you sooo much !!
My pipe is about 3 times as long as that one. Couldn't even get close to the valve 🙃
You are a lifesaver
Glad it's helped you out
Pretty much the only way is to drain it first yeah,? And second my pump isn’t blowing out air anymore could this problem have caused it to not work anymore
Ehen I replaced it, I used a thin wire to fish the rubber end through. It really helped. The hot tub is still leaking from the same spot though. Any ideas as to why?
Possibly the leak is coming from the pump screw fitting or rubber seal and travelling along making it difficult to spot. These are awkward fittings so just keep trying with it and line it up again, hopefully it'll seal and be sorted!
Mine does this- so I need one of these values. Always wondered why you get 2 caps for the water if you need to remove the pump but then it leaks out of the air pipe anyway...
You should get 3 caps, one for each water pipe and one for air larger cap too!
But yes, proves that the one way valve in the air/bubbles section isn't good!
Also check the mushroom valve in your pump too as that's the secondary seal for the air system
I’ve got a leak from here. It seems to be coming from the liner area that the air tube is going into, will changing this valve solve the issue ???
I have the same issue did you ever find out?
Why did you buy air seal and do you have a part number?
Hi, the problem was due to water always leaking back out of this fitting so the one way rubber valve wasn't working right. The part number is in the description:
amzn.to/3xXgtJA
my tub loses air t about 50 percent
i replaced gasket on 2 in pipe no more leaking water but tub not holding air
Hi any idea about the rubber seals on the other two pipes between the liner? Ive taken one out as i have a slow leak and irs worn but cant seem to find what they are called to get a replacement. Funny shape.
You can find the connector seals here:
US: www.ebay.com/itm/254760659816
UK: www.ebay.com/itm/143345264587
And the mushroom/umbrella seals here:
www.ebay.com/itm/254798466900
www.ebay.com/itm/254813890356
And the water pump repair kit here:
US: www.ebay.com/itm/254568546071
UK: www.ebay.com/itm/403197118960
@@NathanielColson thank you 🙂
I think I would of threaded a line through that hole and ties it around the long skinny tail and put the seal back in and then pulled the string.
Hello @Andy Brown, I just got a laz-y-spa Paris and I see the water leaking from the pump cover while I'm filling the pool with water. Did you observe the same water leaking while the filling up?
Love it!!
Hi my lazy spa Palm Springs Hydrojet has just broken the jets didnt work and then air started coming through the back of the filter casing and not out of the jets? Any clues as to whether its fixable please? Water is coming out of the air intake too. Thanks in advance.
Hi Fiona, that sounds like the hydro part inside the pump, it's a large plastic piece that combines air and water, my guess is it's cracked as the plastic seems quite brittle to me. Take the casing off and inspect the screw fittings and seals, you might be lucky and it's just a seal or needs resealing
Hello! Mariana from Brazil
here. I’ve discovered that the same
piece is starting to rip in my Miami spa, however the pipe is much longer so it’s very difficult to reach. Any ideas? Also, I think that air leaks as well - is it common or I have another leak? 😮
Same situation here, did you ever find a fix to this?
Hi I have a question I am trying to blow up my lazy spa miami and there is a lot of air coming out the egg so its not making it to the hot tub i don't know how to fix this
This is normal. Mine does the same. As long as it's blowing up the hot tub it's doing is job👍🏻
Hi Andy, just cleaned Lazy spa and pumping air but air is leaking from jet holes all round base. No punchures just puzzled air is leaking. Can you help
I have the same problem. Don't know how to fix this. Thought it might have been this problem but the plugg looks ok to me and no water leaks. Air comes out though when I inflate it.
Hiya this is exactly what is wrong with mine... Were is link to product please 😃
Hi there. Link should be in the video description. Here it is:
amzn.to/3xXgtJA
I have a question, my pump went out completely. I've tried looking up just the pump to replace with no luck. Only thing I've seen is a complete new egg assembly. for 180-250 us. Got a little over a year out of it. I replaced the impeller twice.
Hi James, parts are difficult to find as unfortunately Bestway don't supply just parts (As you found, just the whole egg). But if you search ebay quite a few people supply second hand parts for them off stripped down units. Not sure how trusty they will be if they've been in service but worth a try.
My whole egg unit is now 3yrs old and going strong with yearly maintenance. Check out my other videos on the channel as cleaning and de-scaling is important.
I have one if you want it
@@fionahunt2954 can I have it please Fiona
@@jamiemacgregor4435 ok cool how do you want to contact me and where are you based pls
@@fionahunt2954 are you on telegram?
My umbrella seal is 9 inches inside the tube yours is close . Have no tools long enough to get it . How do I replace mine I’ve been waiting months to get a tech to call me back .
Hi, sounds odd being so far in, mine was difficult so had to use long nose pliers. There is a product you can buy that screws on the end of the air pipe and has a new valve in it which may be easier
Hi Andy. What’s the name of the product?
@@junkendriven Would you happen to know where this can be purchased?
Why is the plug on the bottom of my hot Tub not ceiling and the tub not holding water please help
Probably the gasket/rubber washer
Fiona Hunt So is there a separate washer other than white the plug fits into that separate it just looks like it’s not engaging
@@iralances5288 erm ill took and take a photo tomorrow
@@iralances5288 i cant send apic here but theres a black washer/gasket in the larger part (femail part) not the plug
What is the description of the valve?
It's a non return valve. I replaced mine 10 months ago and it's already perished so have just ordered one made from thermoplastic polyurethane from eBay as the look stronger. Hopefully this one will last longer🤞
What is the part number need to order one
Hi, unsure on part number but you can order from this link on Amazon amzn.to/3xXgtJA
This spa are terrible quality mines like this from brand new, looks like its going back
URGENT PLEASE
Hi Andy, after two days and lots of water, soap and elbow grease we finally found the air leak on our saluspa.
It's coming from the small flappish thing towards the bottom of the side that apparently connects to the big tube going through the wall.
Seems the seal is leaking. Can I fix this?
Any update on your 6 pin wifi adapter?
Hi Richard, are you subscribed to the mailing list at hottubmanager.co.uk ?
I'll be sending an update in the next week as my development unit is complete and I'm testing my new PCBs to ensure I can produce them quickly/efficiently without failures.
@@junkendriven great news