A trick to stop flywheel moving when you unbolt the clutch is to get an old valve from an engine, heat it and bend the stem 90°, and put the stem in the hole for bell housing bolt, then the valve face in the ring gear groove and it will lock the flywheel
Nice Work 😁 Front crankshaft pulley Most factory pulleys have x2 threaded holes, opposite each other, you can get a puller that uses those threads, with bolts etc Alot better, no damage to pulley 😊 You should get yourself an engine stand, H frame base,, as need with big heavy engines, so it doesn't tip over, T base frames dodgy and can tip Alot easier to work on engine, safer too No crane and chains etc getting in the way 😁
Yeah that’s the only pulley they had. Those bolt holes are tiny and I’ve seen those bolts snap before. I have an engine crane but it’s the smaller one hence why I haven’t used it cuz it’s a bit scketchy 😂
@@stack3dit I started out with a T base engine stand I used for rotary engines, hence why I know they dodgy, nearly tipped over on me, I got some tube steel and wheels and modified to H base frame 👍 Now since I use engine alot, I upgraded to a snap on engine stand with rotating gears on engine mounting, just wind handle, very easy and Great to use, as rotating engine with thin bar and all the weight got boring quickly lol
Yo mean content g, Luke Fink also runs that turbo version on his Jzx 90 had a couple issues but that was due to not running water line, but reckons they are the goods 💪
@@stack3dit massages cuzzy rory rory in the comments homie ahhahahahahhahahahahahahahahahhahaahhahahahahahahaahhahahahahahahahahahahahahahahahahahahahhahhaahhahaah make contact with cuzzy rory too night. when the next vids when your going too kaikoura go kart track for some drifting
Hey bro if your washing engines etc you shouldn’t really let all that shit from the engine go into our water ways man not that great for the environment great content !
A trick to stop flywheel moving when you unbolt the clutch is to get an old valve from an engine, heat it and bend the stem 90°, and put the stem in the hole for bell housing bolt, then the valve face in the ring gear groove and it will lock the flywheel
Nice Work 😁
Front crankshaft pulley
Most factory pulleys have x2 threaded holes, opposite each other, you can get a puller that uses those threads, with bolts etc
Alot better, no damage to pulley 😊
You should get yourself an engine stand, H frame base,, as need with big heavy engines, so it doesn't tip over, T base frames dodgy and can tip
Alot easier to work on engine, safer too
No crane and chains etc getting in the way 😁
Yeah that’s the only pulley they had. Those bolt holes are tiny and I’ve seen those bolts snap before. I have an engine crane but it’s the smaller one hence why I haven’t used it cuz it’s a bit scketchy 😂
@@stack3dit I started out with a T base engine stand I used for rotary engines, hence why I know they dodgy, nearly tipped over on me, I got some tube steel and wheels and modified to H base frame 👍
Now since I use engine alot, I upgraded to a snap on engine stand with rotating gears on engine mounting, just wind handle, very easy and Great to use,
as rotating engine with thin bar and all the weight got boring quickly lol
Can't wait to see this car finished
Yo mean content g, Luke Fink also runs that turbo version on his Jzx 90 had a couple issues but that was due to not running water line, but reckons they are the goods 💪
Yeah we’re gonna be running the water lines on this turbo!
KEEP GRINDING! its coming bro, just keep at it.
Yoooo I’ve been waiting for the next update of the 33 🤙🏽 definitely wouldn’t mind a boat for a skid hack 😂
Boats are awesome 😂
Keep up the good work bro 👍 awesome seeing more uploads
🙌🙌
Yeeeeow joely .
Keepn the content thick and fast brother
🙌🙌
Daily upload grind here we come!
Always looking forward to seeing more on this!
It’s gonna be a cool car once it’s all finished up!
@@stack3dit massages cuzzy rory rory in the comments homie ahhahahahahhahahahahahahahahahhahaahhahahahahahahaahhahahahahahahahahahahahahahahahahahahahhahhaahhahaah make contact with cuzzy rory too night. when the next vids when your going too kaikoura go kart track for some drifting
RB's and oil grime are a duo onto themselves lol.
You are not wrong my friend 😂😂
Nice setup 🤘
👌👌
I am new subscribe to you..keep Woking making the best video......
Appreciate the sub bro!
Keep going bro
We got you
Keep up the content cheeef!
Will do bro!
I’m pretty sure pulsar is a Ozzie company down in adalaide
Maybe owned by them but they’re made in China. Says it on the box
Keep up the content bro!
🙌🙌
Hey bro if your washing engines etc you shouldn’t really let all that shit from the engine go into our water ways man not that great for the environment great content !
Also you can get fined for doing it 😔
Solid
🙌🙌
Yo where did you get a plastic bag bro haven't seen one in years haha ?
Was a paper towel bag 😂
Looks clleeeaaannn come do mine 👍🏻
JC Auto Works😎👍
For all your rfb needs 😎
Comment
Yeow!
Mean
🙌🙌
run the bov lol
Never 😂
run it
Who even runs bov these days apart from subie boys
I use to love a bov when I was younger hahah 😂
😄😄
👌👌