Размер видео: 1280 X 720853 X 480640 X 360
Показать панель управления
Автовоспроизведение
Автоповтор
manual conversion:gearbox clutch/pressure plateclutch master clutch alignment toolflywheel + hardware driveshaft clutch pedal + dust bootb stamp cross membergearstick rubber bootrear main sealclutch fork bearing sandwich platebrake pedal coverpenetrating oildegreasersteps 1. lube necessary bolts 2. drain auto trans 3. remove exhaust 4. remove driveshaft 5. cut lines 6. remove auto 7. remove flywheel 8. degrease back of motor 9. head drain? 10. remove spigot bush 11. remove rear main seal 12. install new main seal 13. install new spigot 14. install sandwich plate 15. install flywheel (loctite) 16. clean flywheel 17. install/align clutch plate 18. install pressure plate 19. remove alignment tool 20. remove/install clutch fork bearing 21. install cross member to gearbox 22. install clutch fork to gearbox 23. install clutch for dust boot 24. remove interior (auto shifter) 25. install gearbox 26. combine drive shaft front/rear 27. install driveshaft 28. cut firewall for clutch master 29. install clutch master 30. install clutch pedal 31. bleed clutch 32. cut brake pedal down 33. fill gearbox with oil 34. install shifter boot 35. cut auto loom inhibitor 36. splice reverse lights 37. install cluster sticker 38. check listtest drive
What a goat. I want to manual swap my Laurel c35 so the process is similar
Isn't the speed sensor in the gearbox? I am currently undergoing a manual swap with the small box. Also the RB20DET gearboxes (Which is the N/A box) comes with a cable sensor?
Rb20det boxes and na rb boxes are different. The gears are thicker on the turbo boxes
Great job mate!
Good shit man!
Thanks man cheers for the support! 💯
Should list out what you bought to help us out 😅
Wow love your work! If I could do that, I'd buy an auto 4-door Skyline in a heartbeat. They are cheaper and less beten up
Hey guys I forgot to mention the R33 front half Manual driveshaft that I used was from an ABS model 🙂
hey bro, just wondering how you find the auto brake pedal? does it feel weird being lower?
Does it matter if it is a turbo or non turbo driveshaft? Just collecting parts for the same conversion.
hey bro mean video, just wondering roughly how many hours this took you? cheers
for a home job and by yourself fuck you did a clean job new sub !!
Cheers thanks man! 💯
Hi bud, can you give me the info for the overlaid cover for the dash, gotta get one !!....great upload and new sub.....👌👌👌
Hey bro I brought it on Trade Me NZ. Was under R34 Cluster Facia! Thanks man 💯
@@DaxReihana-RFB much appreciated bro, will look it up hopefully they ship to the UK.....🤙🤙
Love the mahi bro 💯💯
Cheers bro appreciate it! 💯
sick! where you from man?
Thanks man! From New Zealand 👌
Great vid bro! Quick question for ya, what sized drill bits did ya use for clutch pedal?
Where is the cluster cover from
Hey bro, how did u go abt auto trans light? Mines constantly got auto trans on
I wanna do a manual swap on a primera p11 so bad
Awesome
Does that cluster stick on cover the auto bulb that comes on after removing the trans?
You can just take the globe out. It is really easy. But by jumping the wire the ECU should think that it is neutral
You don't keep your 34 covered outside?
Hey, just curious, how much did this swap cost?
Kia Ora, how much did this cost you all up for all the parts? Can you list the parts please
Hey! Sorry I’m not good at replying on YT 🤦♂️ Message me on insta 😊
What gearbox u use from what car?
Looks like an RB20DET trans they mainly came out in the R33 N/A (RB25DE motors) cars and the R34 HR models (RB20DE motors)
![R34 GTT AUTO TO MANUAL CONVERSION (R33 GTST GEARBOX) - EPISODE 1 [PROJECT R34]](http://i.ytimg.com/vi/hUfTvjcZAY4/mqdefault.jpg)
manual conversion:
gearbox
clutch/pressure plate
clutch master
clutch alignment tool
flywheel + hardware
driveshaft
clutch pedal + dust boot
b stamp cross member
gearstick rubber boot
rear main seal
clutch fork bearing
sandwich plate
brake pedal cover
penetrating oil
degreaser
steps
1. lube necessary bolts
2. drain auto trans
3. remove exhaust
4. remove driveshaft
5. cut lines
6. remove auto
7. remove flywheel
8. degrease back of motor
9. head drain?
10. remove spigot bush
11. remove rear main seal
12. install new main seal
13. install new spigot
14. install sandwich plate
15. install flywheel (loctite)
16. clean flywheel
17. install/align clutch plate
18. install pressure plate
19. remove alignment tool
20. remove/install clutch fork bearing
21. install cross member to gearbox
22. install clutch fork to gearbox
23. install clutch for dust boot
24. remove interior (auto shifter)
25. install gearbox
26. combine drive shaft front/rear
27. install driveshaft
28. cut firewall for clutch master
29. install clutch master
30. install clutch pedal
31. bleed clutch
32. cut brake pedal down
33. fill gearbox with oil
34. install shifter boot
35. cut auto loom inhibitor
36. splice reverse lights
37. install cluster sticker
38. check list
test drive
What a goat. I want to manual swap my Laurel c35 so the process is similar
Isn't the speed sensor in the gearbox? I am currently undergoing a manual swap with the small box. Also the RB20DET gearboxes (Which is the N/A box) comes with a cable sensor?
Rb20det boxes and na rb boxes are different. The gears are thicker on the turbo boxes
Great job mate!
Good shit man!
Thanks man cheers for the support! 💯
Should list out what you bought to help us out 😅
Wow love your work! If I could do that, I'd buy an auto 4-door Skyline in a heartbeat. They are cheaper and less beten up
Hey guys I forgot to mention the R33 front half Manual driveshaft that I used was from an ABS model 🙂
hey bro, just wondering how you find the auto brake pedal? does it feel weird being lower?
Does it matter if it is a turbo or non turbo driveshaft? Just collecting parts for the same conversion.
hey bro mean video, just wondering roughly how many hours this took you? cheers
for a home job and by yourself fuck you did a clean job new sub !!
Cheers thanks man! 💯
Hi bud, can you give me the info for the overlaid cover for the dash, gotta get one !!....great upload and new sub.....👌👌👌
Hey bro I brought it on Trade Me NZ. Was under R34 Cluster Facia! Thanks man 💯
@@DaxReihana-RFB much appreciated bro, will look it up hopefully they ship to the UK.....🤙🤙
Love the mahi bro 💯💯
Cheers bro appreciate it! 💯
sick! where you from man?
Thanks man! From New Zealand 👌
Great vid bro! Quick question for ya, what sized drill bits did ya use for clutch pedal?
Where is the cluster cover from
Hey bro, how did u go abt auto trans light? Mines constantly got auto trans on
I wanna do a manual swap on a primera p11 so bad
Awesome
Does that cluster stick on cover the auto bulb that comes on after removing the trans?
You can just take the globe out. It is really easy. But by jumping the wire the ECU should think that it is neutral
You don't keep your 34 covered outside?
Hey, just curious, how much did this swap cost?
Kia Ora, how much did this cost you all up for all the parts? Can you list the parts please
Hey! Sorry I’m not good at replying on YT 🤦♂️ Message me on insta 😊
What gearbox u use from what car?
Looks like an RB20DET trans they mainly came out in the R33 N/A (RB25DE motors) cars and the R34 HR models (RB20DE motors)