Also I can't speak for everyone but I actually enjoy these car maintenance videos, specifically bc with the shit these cars have been through before and during your ownership, it's always bound to be a laugh 😂 Much love to the channel man, been watching for years hope to see it continue to go up, even the law couldn't shut you down ❤
I think it would be fun if you did a half-assed repair on that engine. Put new pistons and rods in it, ignore all best practices, just get it back running.
i doubt it was his buddy that put it together. you can see marks from where the main caps were installed and torqued. his tuneup was probably dog sh*t and destroyed this nice build. crower is not some chinese pos.
@chadbullock6326 I don't see any indication this was put together incorrectly. More than likely it had bad (or even worse, none at all) tune up in it and went kaboom.
Id use the head on your new motor, didnt he say they were built? Thatll save you bunch of money and youll have built heads ready to go. May have to replace a few things or have em decked or something if piston slapped them when it blew up
Dude please do a lc9 RPO coded 5.3 v8. They come with gen 4 rods and flat top pistons. Only pitfall is they have DOD but you'll be removing the heads anyway. Btw its an all aluminum block that stand up to a beating. They come out of 09 to 13 Silverado 1500s
Rip my buddy had a stock 5.3 2002 stepside and it dropped a valve in the first motor and vaporized piston number 4. Then in the new motor from an 08 Tahoe had issues with the cam or something like that and they had to open the motor. It had trans issues too (4l60e for ya)
Glitter in the oil means it was likely owned by a stripper which aren’t generally known for doing good maintenance. Better to just pull it
Very reasonable observation
3 days ago: the turbo Silverado is back!
27 minutes ago: my turbo silverado engine exploded!
Someone didnt watch the first video
Are we just ignoring the first upload of this? 😂
ya because it rendered weird and was only half the video, didn't notice till it was uploaded lol
@NathanKarhu I figured as much, I thought my internet crashed when the video just stopped.
It's not canon
Lol same, even restarted my router
I got a built LQ9 6.0 or a built LQ4, down in Northern California though
Also I can't speak for everyone but I actually enjoy these car maintenance videos, specifically bc with the shit these cars have been through before and during your ownership, it's always bound to be a laugh 😂
Much love to the channel man, been watching for years hope to see it continue to go up, even the law couldn't shut you down ❤
I was thinking it’s a better form of content b/c it won’t get him into deeper shit than he’s already on
I love it how he's laughing while his motor is just destroyed
Fun part about these motors, it cost 300 bucks and 5 hours to swap, who cares lol it’s fun as absolute shit
If you destroy your motor while having fun there's no better way to react 😂🤘
when nathan makes new content I explode too
loving the new format, watching personality growth in realtime.
so glad this truck is back
That truck reeks of nostalgia. Just turned 21 and headin’ to capital hill
id suspect heat in the rear of the engine was higher and the rings didnt have a enough gap too compensate; Boom she went
good job inspector gadget
"I'd suspect" 🤓
Why yall hating. He's just trying to help. Definitely would make sense to me @GEDEntertainment2021
So glad this truck is back lol you should keep just this truck broski and keep making good content with it like you used to
I think it would be fun if you did a half-assed repair on that engine. Put new pistons and rods in it, ignore all best practices, just get it back running.
"We are closed!" 😂
Shout out to the camera guy finding him in that little hole . 1:57
Bro your buddy had no idea what he was doing when he “built” that
yeah ts was embarrassing
i doubt it was his buddy that put it together. you can see marks from where the main caps were installed and torqued. his tuneup was probably dog sh*t and destroyed this nice build. crower is not some chinese pos.
It's all in the tune.
@@vinny6_9 Crower is good stuff but they also dont leave caps in the oil pan... shit build
@chadbullock6326 I don't see any indication this was put together incorrectly. More than likely it had bad (or even worse, none at all) tune up in it and went kaboom.
Glad to see the truck back
Watching you tear apart this motor has been hilarious good luck with a swap sir
That woman from McDonald's had Nathan's first video deleted 😂
Nathan remembered what I was talking about 😂💨
what video ?
Where i can find one?
@3bo6tshyPersonal the short at McDonald's drive thru lol
"ve are closed"
i love the titles of the last video and this one, its hilarious to think if someone didnt know you got the silverado blown up already
Love your vids man you gotta upload more pleaseeee I enjoy your vids too much 😂. Just found you a few days ago and can’t stop watching every video
Idk why people don’t come to this channel. It kind of interesting . Kinda like whistle in diesel channel. Alittle bit .
Bro has been doing this way longer then whistlin diesel. Nathan is the GOAT of this shit. He's just stuck in shitty ass rainy Washington😂😂😂
sheeesh I love these weekly uploads vibes. LOVE YOU NATHAN
"the whole engines there, it's just, in pieces"
Always a wonderful day when nathan posts a new video ❤
Yall hear him under the motor saying what he did lol funny dope, your vids are awesome keep it up man, your going far honestly
The cap was funny… but the intact leaf has me rolling😂😂😂😂😂
This truck is the reason i started watching lol, like the content Nathan!
always a better day when nathan uploads 🗣🔥
Love you bro, never stop uploading 🤘🏻
I’m so happy he’s back to uploading again
Haha I’m glad you have the truck back!! I’m looking forward to seeing what you gonna do next
Can’t imagine how this would’ve happened while driving the speed limit like Nathan is known to do
hell yeah. Stoked the turbo Silverado is back.
Thank you soo much for the upload days later and not 2 weeks from saying I got the truck back
Hey Nathan. Love your videos. You’re funny af bro but actually smart af haha it’s great. Your really doing something bro haha
He forgot to tighten the rod bolts lmao
Dang, rebuild and know it’s built correct once again. Orignal engine earned her credit/worth back in the beginnings
Cant wait to see this thing running/hooning again🤙🏽
i like actually seeing you work on the car
love the out-tro or whatever the hell you spell it.
Nathan, I've been watching you for years. I'm from Vancouver washington. I'd love to hang out with you sometime. You seem like an awesome dude.
nathan i’m glad you got your truck back
Nathan bro get some drag slicks and race the truck at a drag strip once shes all fixed up! God Bless 🙌
More of this Nathaniel. Love from Sammamamamammmamamamamammamish.
Love from kitsap homie keep up the work! Wish I had an engine for ya
I wanna see that truck do 360's again👌💯💥🔥
the herbert the pervert voice killed me 😂
I told you it was that damn 10mm I've been looking for!
keep doing these types of videos man
Glade I seen all the uploads before everything was pulled from yt. Even diaper man.
5w- glitter ✨
When the strip clubs start selling motor oil 😂
Block off those back two oil passages on the crank with hose clamps, slap the oil pan back on and finish off your now V6.
That exploded so nicely.
Throw a 4.6 2v in it. Cheap. Strong. Love boost.
Someone was drunk as fuck building that 6.0 😂😂😂
I was here for the first upload lmao
This channel is way better than whistlen diesel
Looking like the adoring fan from oblivion in that thumbnail
Bro was definitely drunk when he put this motor together lmao
This is good content Nathan
dang Seattle/Tacoma I didn't know you were that close.
Was looking for a video to sleep to saw this and had to stay awake
Lmao I had that same hoodie but my ex took it from me😂 awesome you still have that hoodie from the old vids
Chevy MFIN POWER BABY!!!
Id use the head on your new motor, didnt he say they were built? Thatll save you bunch of money and youll have built heads ready to go. May have to replace a few things or have em decked or something if piston slapped them when it blew up
Can't wait for donuts in this thing
Dude please do a lc9 RPO coded 5.3 v8. They come with gen 4 rods and flat top pistons. Only pitfall is they have DOD but you'll be removing the heads anyway. Btw its an all aluminum block that stand up to a beating. They come out of 09 to 13 Silverado 1500s
Nathan Karhu got a V6 truck conversion before GTA6 😮
3:22 *laughs in pain knowing it’s gonna be such a pain in the ass from now on*
Well the truck is back
off the rock left a cap in there lmaooo
Oh my God, completely RIP’d the engine, faaaack😂
you should make a video of going to a mechanics and sprinkling metal dust into a clean oil catcher
Need like at least 30 min video of these
nathan get a clapped corvette
c4
C5 is a good option or c4
When he said the engine exploded I thought “oh maybe he just threw a baring or something small…. Nope it literally exploded.
Damn bro built that with temu pistons didnt he?
thing will never die
At least this one downloads with English language audio. The video from a few days ago has German audio, so weird!
I havent been this early since I was invited to that diddy party
Ive got a 3 wire hook up 5.3 ready to go in Michigan 🤣
sheesh cant wait to catch you on the roads maaaaaan catch me on 509
1:35=every Subaru owner
I’m in gig harbor have a 5.3 already pulled and a 6.0 ready to pull low miles in a Silverado
Best 2 day wait eveerrrrr
Check out Fred’s auto wrecking in Enumclaw. I think it’s around 700 for a 5.3.
Bro, I’ve NEVER seen any shit like this this is crazy
Can you start the motor again? Eventually it works?😅😂
Do a 4200 inline 6 cylinder swap from a trailblazer and throw a turbo at it. American Barra swap 🤟
ive seen a few cheap chevy cateyes on marketplace, one green one rn for like $500 but i think its down closer to centrailia
Rip my buddy had a stock 5.3 2002 stepside and it dropped a valve in the first motor and vaporized piston number 4. Then in the new motor from an 08 Tahoe had issues with the cam or something like that and they had to open the motor. It had trans issues too (4l60e for ya)
Dude why you look like me
Bend down Gangg lets goooo!!!!!!
Bro u just got it back 😡
My motor did this exact thing. Would rotate half way and stop. Turns out it was a piston that detonated😂
You now have a 4.5 v6, run that shit till it quits
10 seconds ago is great.
There's no way the guy before didn't hear the knock carnage from it blowing up lol
My rod bends to the side
A dropped valve was best case scenario not really most likely the guy said his bearing clearances were to lose or tight i don't remember
1:24 HONEY MUSTARD